盾构越江隧道囊状沼气爆炸风险的事故树分析

为保证盾构越江隧道工程顺利实施,利用事故树分析法对其开挖过程中的沼气爆炸风险进行了分析。首先建立了盾构隧道沼气爆炸事故树,并对其进行了定性分析。分析结果表明:沼气爆炸事故树共有81个最小割集,说明有81种途径能够导致沼气发生爆炸,故系统危险度高;有6个最小径集,说明有6种途径能够避免沼气发生爆炸。控制沼气溢出和提前释放沼气是控制沼气爆炸的关键因素。从沼气的释放、隧道通风、火源控制和沼气监测四方面提出了控制措施。     

点式列车自动保护模式下的紧急停车、跳停缺陷及解决方法

点式ATP(列车自动保护)是CBTC(基于无线通信的列车控制)的降级模式。以西安地铁2号线信号系统为例,在分析点式ATP信号系统原理的基础上,结合用户经验,对点式ATP模式下紧急停车及跳停功能的缺陷进行了研究,并提出了相应的解决方法。     

站内机车信号窜码掉码的原因分析及处理

工程设计施工考虑不周时,很容易造成设备开通后站内电码化出现机车信号掉码和窜码的现象。通过对站内机车信号掉码和窜码原因进行分析,找到工程设计施工时的缺陷和错误,并提出整改措施,消除行车安全隐患。     

行星齿轮传动系中啮合相位关系

以前对行星齿轮传动机构的分析主要集中在各种制造和装配误差对齿轮系的影响，很少考虑相位差的影响因素。文中通过行星齿轮系简化模型，结合行星齿轮传动系的结构特点，详细说明了行星齿轮中啮合相位差的关系特性，建立了能适应于行星齿轮系分析模型的参数描述，并分析了直齿轮和斜齿轮的行星齿轮传动系相位关系及啮合刚度影响系数的异同。     

含水率对路用水泥混凝土的影响及微波在线测湿系统

在讨论了含水率对路用土质量的影响因素后，通过对不同种类测试器的分析，确定了较为适用的微波传感器，并给出了微波传感器的输出电压与集料含水率之间的关系式，进而对测试准确度进行计算。     

机动车行驶速度检测系统的设计及其在高速公路交通管理中的应用

在目前先进的视频检测技术、车牌号码识别技术、无线通信网络技术、GPS授时技术、计算机技术等高新技术的基础上，对设计出适用于广东省现行高速公路实际的机动车行驶速度检测系统加以阐述，并对该系统与其他应用系统相结合，投入交通监控的应用情况加以介绍。     

Study on dynamic characteristics of vehicle gearbox under multi-boundary conditions

With the development of vehicle gearbox to high-power-density and high-speed, how to predict and optimize the dynamic characteristics of vehicle gearbox becomes increasingly prominent. Aiming at the vehicle gearbox, this paper comprehensively and deeply studies the dynamic characteristics under the multi-boundary conditions. The generation mechanism of the multi-source excitations triggering the gearbox vibration is analyzed firstly. The vibration transfer path of the gearbox is explored. Secondly, the engine excitation, the gear meshing excitation and the bearing support load are numerically calculated. According to the finite element method, a fluid-solid coupling finite element model of the gearbox body is established to predict the gearbox dynamic responses based on the Galerkin method and the Hamiltonian variational principle. Finally, the effects of the excitation condition, oil height and reinforcement forms on the vibration responses of the gearbox body are thoroughly studied by simulation. The analysis indicates that it not only helps to modify and improve the method of forecasting the gearbox dynamic response, and also provides the theoretical and technical guidance for the gearbox design and optimization.     

Target priority determination methods by interval-valued intuitionistic fuzzy sets with unknown attribute weights

The paper aims at the problem of multi-targets threat degree being hard to be evaluated accurately in complex air defense battlefield environments. Combined with multi-sensors information fusion and interval-valued intuitionistic fuzzy sets (IVIFS) theories, the target priority determination is studied. The score and accuracy functions of IVIFS are improved with thinking about the hesitating information in order to increase the rationality. Then, the influence factors of target priority and the nonlinear relationship between the influence factors and target priority are analyzed. Next, the algorithms for calculating the factor weights and sensor weights are given. Based on the theory of IVIFS and technique for order preference by similarity to an ideal solution (TOPSIS), two methods of target priority determination based on the IVIFS and TOPSIS are proposed. At last, an application example verifies the effectiveness and flexibility of the proposed algorithms.     

Exploring the impact of walk–bike infrastructure,safety perception,and built-environment on active transportation mode choice: a random parameter model using New York City commuter data

This study estimates a random parameter (mixed) logit model for active transportation (walk and bicycle) choices for work trips in the New York City (using 2010–2011 Regional Household Travel Survey Data). We explored the effects of traffic safety, walk–bike network facilities, and land use attributes on walk and bicycle mode choice decision in the New York City for home-to-work commute. Applying the flexible econometric structure of random parameter models, we capture the heterogeneity in the decision making process and simulate scenarios considering improvement in walk–bike infrastructure such as sidewalk width and length of bike lane. Our results indicate that increasing sidewalk width, total length of bike lane, and proportion of protected bike lane will increase the likelihood of more people taking active transportation mode This suggests that the local authorities and planning agencies to invest more on building and maintaining the infrastructure for pedestrians. Further, improvement in traffic safety by reducing traffic crashes involving pedestrians and bicyclists, will increase the likelihood of taking active transportation modes. Our results also show positive correlation between number of non-motorized trips by the other family members and the likelihood to choose active transportation mode. The model would be an essential tool to estimate the impact of improving traffic safety and walk–bike infrastructure which will assist in investment decision making.     

Tool for Predicting the Ultimate Bending Moment of Ship and Ship-Shaped Hull Girders

The present paper presents a historical review associated with the research works on hull girder strength of ship and ship-shaped structures. Then, a new program is developed to determine the ultimate vertical bending moment of hull girder by applying direct method, stress distribution method, and progressive collapse analysis method. Six ships and ship-shaped structures used in the benchmark study of International Ship and Offshore Structures Congress (ISSC) in 2012 are adopted as examples. The calculation results by applying the developed program are analyzed and compared with the existing results. Finally, the roles of the developed program and its further development are discussed.