Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of the Circulation System of a Slurry Shield and the Muck Carrying Ability of a Dredging Pipe北大核心CSCD

The circulation system of a slurry shield is composed of a transportation system and a processing system.For shield construction, correct selection of the circulation system for the slurry shield is directly related to construc-tion speed. Using the Nanjing Yangtze tunnel as an example, the material balance calculation of the circulation sys-tem, sieving effect analysis, and analysis of the muck carrying ability of the dredging pipe are conducted for various strata. The practical results show that above mentioned calculations and analysis method provide a good reference for the proper selection of a slurry separation system and dredge pipe. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

新型聚氨酯碎石空心块体生态堤结构构建*

为降低工程对河口环境的不利影响、提升生态效应,依托长江口南槽航道治理一期工程整治建筑物工程进行生态堤结构研究。根据长江口生物类群生态特征并结合工程影响因素,确定大型底栖动物作为目标生物研究对象,分析给出主要优势物种的生境需求特性和关键指标。在此基础上,提出新型生态聚氨酯碎石空心块体结构,给出堤身结构设计形式,并通过流体动力学数值方法对比研究不同块体平面组合布置方式。提出新型空心块体结构的施工工艺,进行结构吊运内力有限元分析,并通过实际施工试验验证可行性。     

弯曲分汊河段桥区通航水流条件及通航孔调整净宽分析*

建设于弯道、分汊的通航环境复杂河段的老旧桥梁在部分水情下海事安全风险较高。为研究调整通航孔对提高此类老旧桥梁通航安全性的作用,以赣江丰城公路大桥为例,建立全长14.7 km的二维水流数学模型,对下游龙头山航电枢纽运行前后洪、中、枯各级流量下河道水流特性、桥孔内和桥区通航水流条件进行计算与分析,并按照规范方法论证桥梁净宽尺度及其调整的可行性。研究成果可为类似弯曲分汊河段老旧桥梁通航环境改善提供借鉴。     

Optimal traffic assignment to urban streets with air pollution consideration

Traffic assignment is usually determined solely on the basis of minimum travel time through the network. The present study on traffic assignment has taken into account not only traffic performance but also air quality over the street. A simple model of highway air pollution is developed by considering macroscopic material balance of polluted air mass over a segment of a highway that passes through an urban area, A new traffic assignment scheme has been developed based on the air pollution model. The optimal traffic assignment obtained by the new scheme is affected significantly by meteorological conditions.     

Examining the influence of firm performance on business risk-taking and the mediation effect of scale of operations in the container terminal industry

Container shipping and its related service sectors help accelerate globalization of the world economy. This industry has been experiencing rapid growth, prompting container terminal operators to increase their handling capacity in response. Providing container terminal services requires substantial capital investment in physical assets such as cargo handling facilities and information systems. On the other hand, operating container terminals is a long-term investment that typically spans several business cycles. Hence prudent asset management using appropriate tools is critical for container terminal operators to sustain their businesses. Generally, due to risk-adverseness, investors are unwilling to take more risk in their investment unless they can reap a higher return. Contrary to this argument, this study finds no direct influence of better firm performance as a proxy of higher return on business risk-taking by container terminal operators. Instead, scale of operations is positively associated with business risk-taking, suggesting that container terminal operators with a larger scale of operations are willing to take more business risk.     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.