Development of a navigation algorithm with dead reckoning for unmanned ground vehicles

A navigation algorithm is indispensable for Unmanned Ground Vehicles (UGVs). During driving, UGVs follow a global path. In this study, we propose a navigation algorithm using Real Time Kinematic (RTK)-Differential Global Positioning System (DGPS) units and encoders to complement global path planning. Sometimes GPS systems lose their signals and receive inaccurate position data due to many factors, such as edifice and barrier obstructions. This paper shows that GPS deviations can be solved using a Dead Reckoning (DR) navigation method with encoders and that position errors can be decreased through the use of RTK-DGPS units. In addition to this method, we will introduce a new waypoint update algorithm and a steering algorithm using RTK-DGPS units.     

Modified lateral control of an autonomous vehicle by look-ahead and look-down sensing

This paper presents a modified lateral control method for an autonomous vehicle with both look-ahead and look-down sensing systems. To cope with sensor noise and modeling uncertainty in the lateral control of the vehicle, a modified LMI-based H lateral controller was proposed, which uses the look-ahead information of the lateral offset error measured at the front of vehicle and the look-down information of the vehicle yaw angle error between the reference lane and the centerline of the vehicle. To verify the safety and the performance of the lateral control, a scaled-down vehicle was developed, and the positioning of the vehicle was estimated with USAT. The proposed controller, which uses both look-ahead and look-down information, was tested for lane changing and reference lane tracking with both simulation and experiment. The simulation and experimental results show that the proposed controller has better tracking and handling performance compared with a controller that uses only the look-ahead information of the target heading angle error.     

Parameter identification for a LuGre model based on steady-state tire conditions

The purpose of this study was to effectively identify parameters for a LuGre friction model based on experimental measures. In earlier work related to this study (Yang et al., 2009), which was based on the characters of polygonal wear (Sueoka and Ryu, 1997), we showed a frictional vibration model for a mass on a moving belt. This model reflected lateral vibrations caused by velocity and toe-in angle. An important aspect of the present study is the improved friction model. A previous friction model, which divided the process into four parts, expressed the sable excited vibration well but failed to reflect the hysteresis loop change when vehicles accelerated or decelerated continuously. A LuGre friction model can solve this problem, but several model parameters must be obtained experimentally. We measured contact width and length of tires as vertical pressure changed; this provided a theoretical basis for apparent stiffness of a unit of tire tread. Based on tire data from Bakker E’s article in a SAE paper from 1987, we identified the Stribeck exponent and Stribeck velocity in LuGre. Then, the results were implemented in a vibration system that verified the rationality of the data.     

Damper modeling for dynamic simulation of a large bus with MR damper

In this study, a large bus is tested to measure its dynamic response by the single-lane change test and the rapid stop test. A full car model is established by ADAMS/Car for computer simulation. For multibody modeling of a large bus, user-defined templates are used in the simulation. Simulation results of the single-lane change test and the rapid braking test are compared to the results of the physical experiments, in which several sensors are installed to measure the vehicle’s responses. The results obtained from the simulation show good agreement with the tests’ results. A dynamic model for the MR(magnetic-rheological) damper is also developed by employing the Magic Formula model, which is widely used in the nonlinear modeling of a tire. Bump simulation of a full car with the MR damper is carried out to verify the performance of the MR damper. The comparison of the simulation results obtained with the MR damper model to the results obtained with the traditional passive damper model showed improved response of the vehicle with the MR damper.     

Effect of fuel stratification on initial flame development: Part 3-high swirl condition

This paper discusses the final investigation into the effect of fuel stratification on flame propagation. In previous works, the characteristics under the no port-generated swirl condition and the low-swirl condition were considered. For this purpose, the initial flame development and propagation were visualized under different axially stratified states in a modified optical single-cylinder SI engine. The images were captured by an intensified CCD camera through the quartz window mounted in the piston. Stratification was controlled by the combination of the port swirl ratio and injection timing. These were averaged and processed to characterize the flame propagation. The flame stability was estimated by the weighted average of flame area and luminosity. The stability was also evaluated through the standard deviation of flame area and propagation distance and through the mean absolute deviation of the propagation direction. The results show that the LML is expanded remarkably under the high-swirl cases up to the highest relative AFRs of 1.71 and 1.75 between 140 and 160CA. In addition, similar to the low-swirl condition, the flame-flow interaction determines the direction of flame propagation, and the governing roles of the two factors vary according to the swirl level; the flow is more important at the higher swirl conditions, and the flame is more important at the lower swirl condition. Finally, fast and stable flame propagation can be achieved under the preferably stratified condition, which is induced by the suitable combination of the high swirl and injection timing.     

Simulating the impacts of household travel on greenhouse gas emissions,urban air quality,and population exposure

This paper establishes a link between an activity-based model for the Greater Toronto Area (GTA), dynamic traffic assignment, emission modelling, and air quality simulation. This provides agent-based output that allows vehicle emissions to be tracked back to individuals and households who are producing them. In addition, roadway emissions are dispersed and the resulting ambient air concentrations are linked with individual time-activity patterns in order to assess population exposure to air pollution. This framework is applied to evaluate the effects of a range of policy interventions and 2031 scenarios on the generation of vehicle emissions and greenhouse gases in the GTA. Results show that the predicted increase of approximately 2.6 million people and 1.3 million jobs in the region by 2031 compared to 2001 levels poses a major challenge in achieving meaningful reductions in GHGs and air pollution.     

A network option portfolio management framework for adaptive transportation planning

A real option portfolio management framework is proposed to make use of an adaptive network design problem developed using stochastic dynamic programming methodologies. The framework is extended from Smit’s and Trigeorgis’ option portfolio framework to incorporate network synergies. The adaptive planning framework is defined and tested on a case study with time series origin-destination demand data. Historically, OD time series data is costly to obtain, and there has not been much need for it because most transportation models use a single time-invariant estimate based on deterministic forecasting of demand. Despite the high cost and institutional barriers of obtaining abundant OD time series data, we illustrate how having higher fidelity data along with an adaptive planning framework can result in a number of improved management strategies. An insertion heuristic is adopted to run the lower bound adaptive network design problem for a coarse Iran network with 834 nodes, 1121 links, and 10 years of time series data for 71,795 OD pairs.     

西江长洲枢纽库尾段采砂工程对航道通航水流条件的影响

西江航道桂平航运枢纽—长洲水利枢纽之间存在约34 km的水位未衔接段,而大藤峡水利枢纽建设选取的江口料场位于长洲枢纽库区回水末端和上游附近滩段。为研究库尾段采砂工程对上游通航水流条件的影响,须同步考虑上游来水和下游库区回水的变化,建立桂平三江口上游黔江河段16 km和桂平枢纽—长洲枢纽约156 km的长河段二维水流数学模型,分析采砂工程对航道通航水流条件的影响。结果表明,采砂工程实施后上游桂平航运枢纽引航道水位降落0.09 m,布岭沙弯道凸岸侧边滩挖除引起主流一定左偏。整体上,除设计流量外,库尾段采砂工程对航道水流条件影响较小。     

基于纸纤维改性的隧道工程透水砂浆性能研究北大核心CSCD

为提出一种适用于隧道初期支护基面找平并且具有一定透水性能的砂浆,将纸纤维加入砂浆试块中对其性能进行改性。通过分析纸纤维的降解原理,并将不同掺量的纸纤维加入砂浆试块中,对其体积密度、吸水率、抗压强度等基本性能指标及微观结构进行测试和分析。由试验结果可知:在碱性环境中,纸纤维具有可降解的性能特点;纸纤维可以使普通砂浆试块的吸水率提升2~3倍,同时也会造成砂浆试块的体积密度和抗压强度降低;对砂浆试块吸水率和抗压强度进行线性拟合后发现其吸水率和抗压强度呈现负相关关系。研究结果表明,通过纸纤维对砂浆进行透水性能的提升是可行的,但是纸纤维掺量对砂浆其他性能的影响还有待进一步研究。     

就地冷再生技术在高速公路养护工程中的应用研究

就地冷再生技术具有施工便捷、污染小、旧料回收利用率高、节约成本等优势,在公路养护中得到了利用.以S49新扬高速为例,从适用条件、混合料设计、路用性能验证以及社会经济效益等方面,对就地冷再生技术进行系统研究,结果表明就地冷再生技术在高速公路养护工程中应用效果理想,可进行推广运用.