VAHLE U—SMG集成系统在岸桥上的应用

随着集装箱运输船舶的大型化特别是超巴拿马船型的发展,岸桥正朝着大型化、高速化、自动化和智能化发展,由此对岸桥的可靠性、低能耗、低维护成本及各种技术参数提出了更新更高的要求。     

MSK信号的仿真及其优势分析

采用解析法对MSK信号的调制方式、解调方式以及功率谱密度进行仿真分析,得出MSK调制方式相对于BPSK和QPSK调制方式具有优势。     

深圳市长途公路客运市场的现状思考

要想从根本上解决目前深圳市公路客运市场无序的问题,政府就必须下狠心、动真格的,对目前的公路客运市场动一次“大手术”;要从体制改革入手解决现有运营企业的多头管理、政企不分、站运不分等弊端,同时,加大运政监管力度,杜绝公路客运市场违规现象的发生。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

叙泸段河道非恒定流作用下水力参数的变化

金沙江与岷江干支流上水电站调峰发电下泄非恒定流引起下游叙泸段河道水流条件显著变化。结合一维非恒定流数学模型和实测资料分析研究叙泸段河道内代表性非恒定流传播过程及其造成水力参数相对于概化恒定流条件时的变化情况。结果表明:叙泸段河道内典型非恒定流波长为218 km,传播速度3 m/s;随着传播距离增加波衰减幅度减小,波形变得光滑;当宜宾水位处于波峰时,下游沿程流量呈现递减趋势,波谷则正好相反;相对于恒定流条件,其流量变化范围为0~730 m3/s,水位抬升0.5~2 m;断面平均流速变化在-0.5~0.2 m/s,比降变化范围为-0.2‰~0.2‰,比降最大值为1.38‰。     

金沙江宜宾段非恒定流过程及传播特性

金沙江、岷江的非恒定流调节过程较为复杂,在宜宾汇合后形成新的非恒定流向下游传播。通过近年实测资料,分析金沙江、岷江非恒定流特征及汇合效果。结果表明:宜宾段非恒定流特征与向家坝电站下泄非恒定流的符合度更高,岷江的非恒定流无典型过程;宜宾段水位变幅和金沙江、岷江水位变幅存在线性关系;涨幅在1.7 m左右,起调水位在1 m左右的泄水波可作为宜宾段非恒定流过程的典型代表,其在下游的传播速度沿程基本保持一致,衰减幅度随着距离的增加而减小。     

锌氧化银电池注液激活系统仿真模拟

利用ANSYS Fluent软件对锌氧化银一次电池注液激活系统进行模拟分析,在三种不同特性的点火器匹配注液激活系统条件下,模拟计算各个阀门能否正常开启、开启时间以及开启的顺序。分析计算得出各个阀门开启的时间,能够很好的指导注液系统设计。