如何正确运用轿车故障码

结合实例介绍了轿车故障码的正确运用:一是要认清电脑故障的性质和范围;二是能区别故障码的真伪性;三是提取故障码之前,应首先确认自诊断系统是否正常;四是不轻易更换电脑;五是故障码的正确清除方法;六是重视检修后的车辆检验;七是熟悉OBD—Ⅱ随车电脑诊断系统。     

贫困大学生就业分析及思路创新

大学生就业形势日益严峻,而贫困大学毕业生是大学毕业生中的弱势群体,他们客观存在着不利因素,很大程度上影响了他们就业。各级就业工作职能部门应该从“以人为本”的高度,创新思路,千方百计帮助贫困大学生克服就业障碍,成功就业。     

关于编组站四显示自动闭塞改造工程中咽喉区段信号机布置方案的讨论

本文通过分析实例，对在编组站四显示自动闭塞改造工程中的信号机布置方案提出改进建议，即通过缩短闭塞分区的长度并制定车场内正侧线股道上的信号机显示方案来提高车站的咽喉通过能力。     

无航速具有自由液面的三维Green脉动源函数的数值积分方法

提出了一种计算无航速具有自由液面的三维Green脉动源函数的方法。采用零阶Bessel函数的Laplace变换，将无航速具有自由液面的三维Green脉动源函数变形为易于截断处理的形式，实现无穷积分向有限积分的转变。采用样条插值技术和自适应方法解决了高频振荡函数的数值积分的速度和精度问题。对半球浮体进行数值计算，结果令人满意，表明该方法的经济有效性。     

全回转拖轮的阻力性能分析

论述全回转拖轮的阻力性能特点,通过船模试验结果验证全回转拖轮在自航状态时兴波阻力是总阻力中的主要成分,结合有关实船论述船舶主尺度、船型系数及线型对阻力性能的影响,阐明如何设计和建造阻力性能好的全回转拖轮。     

桥台墩身施工裂缝原因的分析与处理

对某桥的两个桥台和两个墩身产生裂缝的原因进行分析 ,针对不同的情况进行加固补强处理 ,并提出预防裂缝的相应措施。     

A review of the Effect of α/W ratio on fracture toughness （Ⅱ） experimental investigation in LEFM

In part I of this series, experimental investigation in EPFM （elastic-plastic fracture mechanics） had been discussed. In this paper, experimental investigation in LEFM （ linear elastic fracture mechanics） is given. Fracture toughness tests had been carried out on three different strength steels, using both through-cracked specimens with different α/W ratio and semi-elliptical cracked specimens with variable crack size and shape. Results show that the fracture toughness KIC increases with decreasing α/W when α/W 〈 0.3 for three-point-bend specimens, and that for α/W 〉 0.3, it is independent of α/W. Shallow crack specimens, both through-cracked and surface-cracked, gave markedly higher values than deeply notched specimens. However, the effect of crack shape on fracture toughness is negligible. Results also show that the LEFM approach to fracture is not tenable for design stresses where αc is often very small, far less than 2.5 （ KIC/σy）^2.     

船舶冰级风险管理直面低温挑战

在俄罗斯石油业迅猛发展,人们对环境安全日益关注以及油轮运价等因素的积极影响下,市场分析家预测,到2008年,世界冰级船队的运输能力有可能增长到1800万载重吨。     

区域性轨道交通线网规划评价指标体系探讨

区域性轨道交通线网评价与公路网、公交网络的评价体系存在一定不同。在分析了我国现有的区域性轨道交通线网规划评价体系的基础上,阐述了评价指标体系选取的原则及方法;通过对各项指标进行分析比较,定性和定量相结合,利用目标层次分类展开法,建立了一套适用于区域性轨道交通线网规划的综合评价指标体系。     

Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.