气压ABS系统流量特性的实验研究

开发了气压ABS电磁阀测试系统，建立了气室充、放气过程压力变化的微分方程，结合两者研究了气压ABS系统的流量特性，获得了某中型客车ABS系统在不同情况下的流量系数。讨论了ABS电磁阀的结构参数和动作频率对整个系统流量特性的影响，并得到了几种典型动作频率下的流量系数。建立的气室压力模型和所求得的流量系数为气压ABS控制逻辑的设计提供了依据。     

基于CAN的混合动力汽车控制系统体系结构研究

在分析某型混合动力汽车的结构与工作原理的基础上，基于CAN总线技术，研究了控制系统的网络拓扑结构、节点功能及信息传递方式，以及硬件设计中的节点通信接口结构和控制系统的软件结构。其研究方法和结论为混合动力汽车以及其它类型车辆控制系统的研究和开发提供了理论依据和技术基础。     

电动汽车半实物仿真测试平台(HUSTEVP)的研究和设计

阐述了电动汽车半实物仿真测试平台HUSTEVP的设计目标和要求。介绍了电动汽车半实物仿真测试平台HUSTEVP的系统设计，即该系统的结构和软硬件设计。在其硬件设计中，着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。最后，介绍了测试平台HUSTEVP的应用实例。     

重庆鹅公岩大桥东锚洞室防水堵漏工程浅谈

介绍应用水泥基渗透结晶型防水材料 (凯顿百森防水材料 )于地下结构混凝土的防水堵漏的工艺和施工 ,并有工程实例     

轿车覆盖件成型过程动态仿真有限元建模技术研究

研究了轿车覆盖件冲压成型过程动态仿真中的有限元建模问题，比较了可用于覆盖件成型分析的几类单元；讨论了单元的选取和单元划分的若干原则。并结合Santana2000型轿车侧框和NUMISHEET’96的S－Rail标准考题，说明了有限元仿真模型对成型仿真结果的影响。     

景观道路的设计实践——广阳岛环岛路设计

广阳岛环岛路的主要功能是服务性景观路,跟环岛滨江公园一起,共同构筑广阳岛的滨江景观带。尝试引进了国外的宁静化设计,尽可能推行最生态的工程做法,努力创造人与自然相和谐的环境,并竭尽全力地将这些构想付诸实施。为了实现以上目标,道路、交通、排水、结构、桥梁和电照专业,在景观专业的组织下,共同展开了这条景观路的设计尝试。     

船舶柴油机调速器有限转角力矩电机优化控制

本文针对新型的船舶柴油机调速器有限转角力矩电机控制系统优化与稳定性问题,在Matlab/Simulink中基于电枢回路方程与力矩方程搭建有限转角力矩电机动态系统模型.通过数据拟合方法构建电机非线性模型,基于线性控制理论对串级PID控制系统进行稳定性分析,最后使用遗传算法对PID参数进行优化设计.研究成果可为该电机用于柴油机电子调速执行机构提供优化及控制参考.     

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

Full Duplex Communications for Next Generation Cellular Networks: The Capacity Gain

Full duplex communication highly improves spectrum efficiency of a wireless communication link. However, when it is applied to a cellular network, the capacity gain from this technology remains unknown. The reason is that full duplex communication changes the aggregate interference experienced by each communication link in cellular networks. In this paper, the capacity gain from full duplex communication is studied for cellular networks of 4G and beyond, where the same frequency channel is adopted in each cell. A two-layer Poisson point process (PPP) is adopted to model the network topology, and stochastic geometry is employed to derive the coverage probability and the average capacity of typical link in a cellular network. On the basis of these derived parameters, the capacity gain from full duplex communication is determined. Numerical results reveal that without mutual interference cancellation (MIC), the capacity gain is small under various power levels; with perfect MIC at base stations, the capacity gain can exceed 60%; with imperfect MIC at base stations, the capacity gain decreases quickly even with a slight drop of MIC performance.     

中散公司信息化提升的新思路

通过分析中海散货运输有限公司当前在信息化方面取得的成绩和存在的问题,提出了信息化建设的新思路.阐述了企业信息化与精细化管理的相互推动作用,提出提高企业信息化水平成就精细化管理企业的必然趋势.