三体船型PCC风荷载的实验性研究

In recent years, demands for car transportation by a ship have been increasing with favorable economic conditions in auto sector, and the need of a pure car carrier (PCC) has grown quickly. A PCC needs huge parking space but smaller displacement since a car is comparatively light for its volume. As a result, almost all PCCs have wide breadth, shallow draft and huge structure above the water surface. These features cause some technical issues of a PCC, like lack of stability, effect of strong winds on its resistance, difficulty of course keeping in rough seas, difficulty of berthing in strong winds, and so on. To overcome these technical issues, one of the authors has proposed a new concept for a PCC. This is a trimaran PCC which has very limited transverse bulkheads in the center hull by using two side hulls as fenders. In the present research, wind forces acting on a scale model of the trimaran PCC were measured in the towing tank with a wind generator at Osaka Prefecture University. Furthermore, in order to clarify the characteristics of wind pressure on the trimaran, height and width of tunnels which are between a main hull and side hulls were changed. And then, in order to imitate a real ship, we used wind reduction technology of corner-cut design for accommodation house of the ship. Moreover, the wind pressure acting on the trimaran was compared with that on a mono-hull PCC. Using these experimental and theoretical results, an estimation method of wind pressure acting on the trimaran PCC is deduced.     

海上风力机安装技术研究

Wind power has made rapid progress and should gain significance as an energy resource, given growing interest in renewable energy and clean energy. Offshore wind energy resources have attracted significant attention, as, compared with land-based wind energy resources, offshore wind energy resources are more promising candidates for development. Sea winds are generally stronger and more reliable and with improvements in technology, the sea has become a hot spot for new designs and installation methods for wind turbines. In the present paper, based on experience building offshore wind farms, recommended foundation styles have been examined. Furthermore, wave effects have been investigated. The split installation and overall installation have been illustrated. Methods appropriate when installing a small number of turbines as well as those useful when installing large numbers of turbines were analyzed. This investigation of installation methods for wind turbines should provide practical technical guidance for their installation.     

某豪华游轮在波浪中的耐波性能预报

The seakeeping performance of a luxury cruise ship was evaluated during the concept design phase. By comparing numerical predictions based on 3-D linear potential flow theory in the frequency domain with the results of model tests, it was shown that the 3-D method predicted the seakeeping performance of the luxury cruise ship well. Based on the model, the seakeeping features of the luxury cruise ship were analyzed, and then the influence was seen of changes to the primary design parameters (center of gravity, inertial radius, etc.). Based on the results, suggestions were proposed to improve the choice of parameters for luxury cruise ships during the concept design phase. They should improve seakeeping performance.     

RANS方法的螺旋桨与舵附推力鳍相互干扰水动力性能

The Reynolds-averaged Navier-Stokes (RANS) method, along with the Fluent software package, was used to study the steady and unsteady interaction of propellers and rudders with additional thrust fins. The sliding mesh model was employed to simulate unsteady interactions between the blades, the rudder and the thrust fins. Based on the numerical results, the pressure distribution on the propeller and the efficiency of the fins were calculated as a function of the attack angle. The RANS results were compared with results calculated by the potential method. It was found that the results for the potential method and the RANS method have good consistency, but they yield maximum efficiencies for the fins, and thus corresponding attack angles, that are not identical.     

基于Simulink的带式浮桥动态仿真

A mathematical model of a ribbon pontoon bridge subjected to moving loads was formulated using the theory of simply supported beams. Two types of moving load models were used, the first a moving-constant-force model and the second a moving-mass model. Using both types of loads, the dynamic behavior of a ribbon pontoon bridge was simulated while subjected to a single moving load and then multiple moving loads. Modeling was done with the Simulink package in MATLAB software. Results indicated that the model is correct. The two types of moving load models made little difference to the response ranges when loads moved on the bridge, but made some difference to the response phases. When loads left, the amplitude of the dynamic responses induced by the moving-constant-force model load were larger than those induced by the moving-mass model. There was a great deal more difference when there were more loads.     

多Agent的船舶电力系统网络重构技术

Reconfigurability of the electrical network in a shipboard power system (SPS) after its failure is central to the restoration of power supply and improves survivability of an SPS. The navigational process creates a sequence of different operating conditions. The priority of some loads differs in changing operating conditions. After analyzing characteristics of typical SPS, a model was developed used a grade III switchboard and an environmental prioritizing agent (EPA) algorithm. This algorithm was chosen as it is logically and physically decentralized as well as multi-agent oriented. The EPA algorithm was used to decide on the dynamic load priority, then it selected the means to best meet the maximum power supply load. The simulation results showed that higher priority loads were the first to be restored. The system satisfied all necessary constraints, demonstrating the effectiveness and validity of the proposed method.     

人字齿轮减振降噪的修形设计

To reduce vibration and noise and increase transmission efficiency, a three segment method for modifying the pinion profile was proposed. Cutter surface equations were deduced by changing the shape of the cutter-edge, substituting three segment parabolas for the line. The influence of longitudinal tooth modifications on tooth surface load distributions was discussed. Transmission error minimization and uniformity of tooth surface load distribution were chosen as optimization goals and the modified parameters were obtained by applying the complex method. Finally, an experiment comparing the loaded transmission error, vibration, and noise both before and after modifications was carried out. The results indicate that the modified design is reliable.     

大型舰船电力系统潮流计算方法

The effect of line voltage drop is considered larger on loads, especially on asynchronous motor, transformers and other non-linear load parameters in power system of large ships. A novel power flow method based on improved node voltage method is proposed, and a typical ship power system, which has 2 power stations and 10 nodes, with closed-loop design but open-loop operation, is taken as an example. Simulation results show that the improved power flow calculation method has achieved higher accuracy and better convergence.     

变分法的参数约束估计法

The accuracy of parameter estimation is critical when digitally modeling a ship. A parameter estimation method with constraints was developed, based on the variational method. Performance functions and constraint equations in the variational method are constructed by analyzing input and output equations of the system. The problem of parameter estimation was transformed into a problem of least squares estimation. The parameter estimation equation was analyzed in order to get an optimized estimation of parameters based on the Lagrange multiplication operator. Simulation results showed that this method is better than the traditional least squares estimation, producing a higher precision when identifying parameters. It has very important practical value in areas of application such as system identification and parameter estimation.     

The two-dimensional study of the interaction between liquid loshing and elastic structures

Sloshing phenomenon in the liquid cargo carriers has caught the attention of researchers as the interaction between the sloshing waves and structure is one of the key point and difficulty in the study of sloshing. In this paper, we captured the free surface with a volume of fluid (VOF) method and then calculated the motions and responses of the structure by adopting the Reynolds-averaged Navier-Stokes (RANS) equations for the whole fluid domain. With the use of user defined functions (UDF) in Fluent, the interaction between fluid and structure was then simulated. As a reasonable simplification, the authors studied the response of a single cantilever in a tank under sloshing loads; Further study should pay more attention to the mechanisms of interaction between sloshing waves and elastic structures.