Modeling and simulation of a counter-rotating turbine system for underwater vehicles

The structure of a counter-rotating turbine of an underwater vehicle is designed by adding the counter-rotating second-stage turbine disk after the conventional single-stage turbine. The available kinetic energy and the absorption power of the auxiliary system are calculated at different working conditions, and the results show that the power of the main engine and auxiliary system at the counter-rotating turbine system matches well with each other. The experimental simulation of the lubricating oil loop, fuel loop, and seawater loop are completed right before the technology scheme of the counter-rotating turbine system is proposed. The simulation results indicate that the hydraulic transmission system can satisfy the requirements for an underwater vehicle running at a steady sailing or variable working conditions.     

Real-Time Fault Diagnosis for Gas Turbine Blade Based on Output-Hidden Feedback Elman Neural Network

In order to remotely monitor and maintain large-scale complex equipment in real time, China Telecom plans to create a total solution that integrates remote data collection, transmission, storage, analysis and prediction. This solution can provide manufacturers with proactive, systematic, integrated operation and maintenance service, and the data analysis and health forecasting are the most important part. This paper conducts health management for the turbine blades. Elman neural network, and improved Elman neural network, i.e., outputhidden feedback (OHF) Elman neural network are studied as the main research methods. The results verify the applicability of OHF Elman neural network.     

诺伊达地铁车辆制动系统模块化工艺设计

介绍了印度诺伊达地铁车辆制动系统结构,采用模块化工艺设计方法对制动零部件进行设计,分别设计出风源模块、制动控制模块、辅助控制模块及管路模块,从而优化产品结构,简化组装,提高了工作效率,并且方便后续维护,提高产品竞争力。     

移动闭塞系统区间通过能力分析及参数计算

移动闭塞条件下“闭塞分区”呈现出“移动”和“长度变化”的特征,其区间通过能力的计算较固定闭塞系统更加复杂。本文建立了移动闭塞系统区间通过能力的数学模型,对区间通过能力与列车追踪运行速度、跟驰车距和列车性能等参数之间的相互关系进行了定性、定量分析,并就关鍵参数的计算方法进行了深入的讨论,对移动闭塞条件下的列车运行控制与行车组织有一定的参考价值。     

Dynamic Behavior of Two Part Towing Cable System During Turning

An improved numerical method is used to simulate the dynamic behavior of a two part towing cable systems during turnings. In U turns and full turns, periodical heave motions are found both for the towed vehicle and for the depressor. Periodic motions of the subsea units and of the cable surface tension are closely related to the turning parameters, such as turning velocity and turning radius. System parameters, such as length of the second cable and the vehicle hydrodynamics, also damp turning instability.     

Vortex-induced vibration of a tension leg platform tendon: Multi-mode limit cycle oscillations

This paper studies the application of mathematical models to analyze the vortex-induced vibrations of the tendons of a given TLP along the Indian coastline, by using an analytical approach, analyzed using MATLAB. The tendon is subjected to a steady current load, which causes vortex-shedding downstream, leading to cross-flow vibrations. The magnitude of the excitation (lift and drag coefficients) depends on the vortex-shedding frequency. The resulting vibration is studied for possible resonant behavior. The excitation force is quantified empirically, the added mass by potential flow hydrodynamics, and the vibration by normal mode summation method. Non-linear viscous damping of the water is considered. The non-linear oscillations are studied by the phase-plane method, investigating the limit-cycle oscillations. The stable/unstable regions of the dynamic behavior are demarcated. The modal contribution to the total deflection is studied to establish the possibility of resonance of one of the wet modes with the vortex-shedding frequency.     

Some insights in novel risk modeling of liquefied natural gas carrier maintenance operations

This study discusses the analysis of various modeling approaches and maintenance techniques applicable to the Liquefied Natural Gas (LNG) carrier operations in the maritime environment. Various novel modeling techniques are discussed; including genetic algorithms, fuzzy logic and evidential reasoning. We also identify the usefulness of these algorithms in the LNG carrier industry in the areas of risk assessment and maintenance modeling.     

A new method for absolute datum transfer in seafloor control network measurement

To decrease the time consumption and the labor intensity in the absolute datum transfer of traditional seafloor control network measurement, a new method, namely sailing-circle positioning method, is put forward in this paper. First, the traditional intersection positioning model is improved by considering the equivalent sound velocity profile error as an unknown parameter in the adjustment model. Second, the effect of geometric dilution of precision (GDOP) on positioning accuracy is analyzed. By seeking for the minimum of GDOP, it is concluded that the absolute datum transfer can achieve the highest accuracy in the condition of sailing along a circle relative to other sailing paths. Moreover, the optimal radius of the circle for the accurate datum transfer is also given out. Besides, the correlation between the accuracy of datum transfer and the sound velocity error in this method is analyzed. Finally, the new method was tested and verified by the experiments in Songhua lake with the water depth of 60 m and in South China sea with the water depth of 2000 m, respectively. These experiment results show that the new method can improve the accuracy and efficiency of traditional datum transfer method significantly.     

Enabling a viable technique for the optimization of LNG carrier cargo operations

In this study, we optimize the loading and discharging operations of the Liquefied Natural Gas (LNG) carrier. First, we identify the required precautions for LNG carrier cargo operations. Next, we prioritize these precautions using the analytic hierarchy process (AHP) and experts’ judgments, in order to optimize the operational loading and discharging exercises of the LNG carrier, prevent system failure and human error, and reduce the risk of marine accidents. Thus, the objective of our study is to increase the level of safety during cargo operations.