MAS在机场路面路径优化中的应用研究

利用多Agent技术,研究进出港航班滑行路径的优化问题,为刚降落和即将出港的航班规划最短滑行路径,判断航班在规划的滑行路径上是否会发生对头相遇.由于多Agent技术更能体现人类的社会智能,更适合开放的、动态的社会环境,因此引进这一技术对进出航班滑行路径进行优化.文中将每架飞机被看作是一个Agent;将跑道,滑行道,停机位等看作是资源Agent;在多Agent环境下,优化出最佳的滑行路径.     

Analysis on Ground Surface Deformation and Influence of Construction Parameters Caused by Two Different Shield Machines in Double-tube Tunnelling北大核心CSCD

Based on a shield-driven running tunnel project of Hangzhou Metro Line 2, this paper carries out field measuring of the ground surface deformation caused by two different shield machines in double-tube tunnelling in soft soil areas, obtains the laws of the surface deformation caused by shield-driven double-tube tunnelling and verifies the applicability of the modified Peck formula to double-tube tunnelling. The results show that in soft soil areas the impacts on ground surface deformation caused by different shield construction parameters in the previously and subsequently excavated tunnels are different, while the surface deformation changes sharply before and after the shield machine passing through the cutting face, and a rebound phenomenon occurs when the shield tail passes through the cutting face due to the influence of the grouting; The cutterhead torque of the shield machine in soft soil areas can be composed of five calculation factors, and the calculation results are in good agreement with the measured values. The larger the opening rate of the shield cutterhead is, the larger the average torque value will be, the higher the percentage of large ground loss rate will be, and the larger the maximum ground surface settlement will be; The ratio of cutterhead torque T to mucking volume per ring Q is used as the control parameter for analyzing the ground surface settlement, and a certain positive correlation between the ratio and the surface settlement value is determined, the smaller the cutterhead opening rate is, the more accurate the fitting results will be. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Improving the predictiveness of the quasi-d combustion model for spark ignition engines with flexible intake systems

Fast and predictive simulation tools are prerequisites for pursuing simulation based engine control development. A particularly attractive tradeoff between speed and fidelity is achieved with a co-simulation approach that marries a commercial gas dynamic code WAVE™ with an in-house quasi-dimensional combustion model. Gas dynamics are critical for predicting the effect of wave action in intake and exhaust systems, while the quasi-D turbulent flame entrainment model provides sensitivity to variations of composition and turbulence in the cylinder. This paper proposes a calibration procedure for such a tool that maximizes its range of validity and therefore achieves a fully predictive combustion model for the analysis of a high degree of freedom (HDOF) engines. Inclusion of a charge motion control device in the intake runner presented a particular challenge, since anything altering the flow upstream of the intake valve remains “invisible” to the zero-D turbulence model applied to the cylinder control volume. The solution is based on the use of turbulence multiplier and scheduling of its value. Consequently, proposed calibration procedure considers two scalar variables (dissipation constant C _β and turbulence multiplier C _M ), and the refinements of flame front area maps to capture details of the spark-plug design, i.e. the actual distance between the spark and the surface of the cylinder head. The procedure is demonstrated using an SI engine system with dual-independent cam phasing and charge motion control valves (CMCV) in the intake runner. A limited number of iterations led to convergence, thanks to a small number of adjustable constants. After calibrating constants at the reference operating point, the predictions are validated for a range of engine speeds, loads and residual fractions.     

基于M1类汽车加速行驶车外噪声测量的不确定度分析

在汽车试验的过程中由于各种确定性系统误差和不确定性系统误差的因素影响,不可避免的对试验结果产生影响。本文对汽车车外加速噪声测定值的影响因素及不确定度进行分析。并结合M1类车试验得出对该检测项目的不确定度评价结果。     

Model-based design of a variable nozzle turbocharger controller

Variable Nozzle Turbocharger (VNT) was invented to solve the problem of matching an ordinary turbocharger with an engine. VNT can harness exhaust energy more efficiently, enhance intake airflow response and reduce engine emissions, especially during transient operating conditions. The difficulty of VNT control lies in how to regulate the position of the nozzle at different engine working conditions. The control strategy designed in this study is a combination of a closed-loop feedback controller and an open-loop feed-forward controller. The gain-scheduled proportional-integral-derivative (PID) controller was implemented as the feedback controller to overcome the nonlinear characteristic. As it is difficult to tune the parameters of the gain-scheduled PID controller on an engine test bench, system identification was used to identify the plant model properties at different working points for a WP10 diesel engine on the test bench. The PID controller parameters were calculated based on the identified first-order-plus-dead-time (FOPDT) plant model. The joint simulation of the controller and the plant model was performed in Matlab/Simulink. The time-domain and frequency-domain performances of the entire system were evaluated. The designed VNT control system was verified with engine tests. The results indicated that the real boosting pressure traced the target boosting pressure well at different working conditions.     

复杂环境超小间距隧道盾构掘进施工技术北大核心CSCD

针对浅埋超小间距隧道盾构施工,文章以特拉维夫红线轻轨工程西标段双线盾构施工为工程背景,从隧道加固施工、盾构掘进控制、监测控制与应急管理等方面进行系统研究。结果表明,加固施工在小间距盾构隧道施工中至关重要,可有效降低隧道施工风险;对未加固的小间距盾构隧道施工,应保持土压平稳,加强土压精细化控制;严格控制出渣量,做好渣土改良,控制土体损失率低于0.3%;在盾壳外部注入膨润土或克泥效,可有效地减少邻近隧道的位移量;应结合实时监测数据,控制回填注浆量及注浆质量;隧道施工过程应加强对邻近既有建筑物的监测。     

感潮河段深水航道乘潮保证率及疏浚维护

以长江太仓—江阴河段12.5 m深水航道实测资料为依据,统计计算沿程不同季节潮位特征值及大型船舶通航的乘潮保证率,探讨不同季节满足设计通航标准的航道水深,进而提出深水航道分季节的变水深维护方案。     

基于PFV策略的连续型元胞自动机交通流模型

科学合理的微观交通流仿真模型是研究交通控制手段有效性的关键.本文结合一种考虑驾驶员视野内前后多车影响的跟驰策略，建立了连续型元胞自动机交通流模型.仿真实验表明，仿真数据与实测数据有较好的拟合性，仿真得到的 K-Q、K-V和 Q-V图能较好地反映实际道路交通流的失稳现象，所建立的模型具有适应不同场景的兼容性与灵活性，能够作为研究我国实际道路交通流问题的仿真工具.     

红外线加热板在荣兰路的应用及工艺探讨

结合荣兰路的预防性养护工程，详细介绍了红外线加热板的工作机理、设备功能及结构、工艺流程、施工方案和作业要点等，并对其实际作业效果进行了观测、分析、评定，在经济性和实用性上均取得了满意的效果。     

新型船舶运动控制平台及海上试验

研制出一艘以水动力学相似准则缩尺的无人驾驶遥控模型船，模型船装有PC／104为主控计算机的船舶控制器，模型船由岸上主PC机遥控，用Honeywell公司的HMR3000碰罗经测量航导，用差分GPS系统定位，自主控制和推进，该遥控篡自治船舶运动控制已经进行了两次海上试验并取得成功，本文介绍该平台的系统设计，控制系统硬件和软件和海上试验经。