公路工程项目经理素质评价模型研究

从公路工程项目经理应具备的素质出发，构建素质评价指标体系，并运用模糊综合评判方法建立了公路工程项目经理素质的评价模型。     

Short‐term travel time forecasts for transport information system in hong kong

In this paper, a case study is carried out in Hong Kong for demonstration of the Transport Information System (TIS) prototype. A traffic flow simulator (TFS) is presented to forecast the short‐term travel times that can be served as a predicted travel time database for the TIS in Hong Kong. In the TFS, a stochastic deviation coefficient is incorporated to simulate the minute‐by‐minute fluctuation of traffic flows within the peak hour period. The purposes of the case study are: 1) to show the applicability of the TFS for larger‐scale road network; and 2) to illustrate the short‐term forecasting of path travel times in practice. The results of the case study show that the TFS can be applied to real network effectively. The predicted travel times are compared with the observed travel times on the selected paths for an OD pair. The results show that the observed path travel times fall in the 90% confidence interval of the predicted path travel times.     

A study on mechanical mechanism of train derailment and preventive measures for derailment

The research status of train derailment is summarized. Major problems existing in current derailment research are pointed out. By applying system dynamics stability concepts, the mechanical mechanism of train derailment is described. The theory of random energy analysis for train derailment is then further expounded and preventive measures for train derailment and a calculation method for an anti-derailment safety coefficient (of train - track time variant system) are introduced. Finally, some train derailment cases are analysed. Six train - track time variant system vibration cases are calculated, four of which derailed and two that did not. The conclusion compares the results of the theoretical analysis with that which actually occurred.     

打桩施工对邻近河道的影响

打桩施工过程会对周围建筑物及环境产生一定影响。对打桩施工的影响机理及沉桩过程模拟进行理论分析,并结合上海地区河道陆域范围内某新建厂房项目,运用孔穴扩张理论及动力有限元法,计算分析打桩施工对邻近河道的影响。动力有限元的计算结果表明,打桩施工对河道护岸影响较小,且与孔穴扩张理论的计算结论基本一致。同时提出预防和减轻打桩施工影响的设计、施工、监测措施,可为类似工程提供借鉴。     

Model-independent self-tuning fault-tolerant control method for 4WID EV

To solve the problem of the existing fault-tolerant control system of four-wheel independent drive (4WID) electric vehicles (EV), which relies on fault diagnosis information and has limited response to failure modes, a modelindependent self-tuning fault-tolerant control method is proposed. The method applies model-independent adaptive control theory for the self-tuning active fault-tolerant control of a vehicle system. With the nonlinear properties of the adaptive control, the complex and nonlinear issues of a vehicle system model can be solved. Besides, using the online parameter identification properties, the requirement of accurate diagnosis information is relaxed. No detailed model is required for the controller, thereby simplifying the development of the controller. The system robustness is improved by the error based method, and the error convergence and input-output bounds are proved via stability analysis. The simulation and experimental results demonstrate that the proposed fault-tolerant control method can improve the vehicle safety and enhance the longitudinal and lateral tracking ability under different failure conditions.     

An analytical investigation of two-dimensional and three-dimensional biplanes operating in the vicinity of a free surface

In the present article, the classical two- and three-dimensional lifting theories are generalized to the biplane operating in proximity to a free surface. The singularity distribution method is employed to calculate the lifting force for a two-dimensional biplane subjected to wing-in-ground effect in the vicinity of a free surface, and the three-dimensional correction is carried out by the aid of the Prandtl lifting line theory. The essential techniques lie in finding the three-dimensional Green’s function for the system of horseshoe vortices operating above a free surface and ensuring numerical implementation. Extensive numerical examples are carried out to show the lift coefficient for the two- and three-dimensional biplanes in the vicinity of a free surface with the variation of the clearance-to-chord ratio and the height-to-chord ratio. Incidentally, the induced (inviscid) drag coefficients as well as the lift-to-drag ratio for a three-dimensional biplane are also computed. Good agreement can be found among results obtained from this study and the experiment.     

Prediction of antilock braking system condition with the vehicle stationary using a model-based approach

An Antilock Braking System (ABS) is one of the most important safety facilities equipped in modern vehicles. A self-test is therefore embedded into its ECU to identify any electronic malfunction. However there is no effective method to predict or check its mechanical conditions routinely to ensure its functionality. Because the ABS system is merely actuated above a particular speed in emergency stops, the current brake test facilities are not adequate for ABS test. Because of the dangers involved it would not be acceptable to use a public road to implement such a practice for fault detection so an alternative means must be sought. To provide a safe and convenient solution this paper proposes a novel method to predict ABS faults whilst the vehicle is stationary. In this situation a model-based approach is applied to predict various faults from the ABS, especially from its hydraulic subsystem. As such, a mathematic model is developed to describe the operating processes of ABS including possible faulty conditions. An autonomous control strategy is also designed to actuate the control module independently without the knowledge of the control algorithms embedded in an ABS control module. This approach is evaluated through a Simulink simulation.     

Promoting Development through Multimodal Freight Transport in Bangladesh

Abstract

Development emanating from international trade and investment in many least‐developed economies is impeded by inland freight transport systems that restrict multimodal transport. Increasing international trade may raise gross domestic product, generating increased demand for internal containerized cargo movements, but the requisite transport infrastructure is lacking. The paper explores impediments to developing effective multimodal transport and possible solutions in Bangladesh, which is an extreme case in point. It reports applications of Delphi techniques that explored local expert opinions regarding policies required to tackle such impediments. A panel of corporate executives perceived a changing inland transport system poorly suited to efficient origin‐to‐destination cargo movements in international supply chains. To promote further development, customs procedures must be streamlined and Bangladeshi shippers must adopt a door‐to‐door transport system.     

四辊轴式混凝土整平机设计

针对三辊轴式混凝土整平机存在的缺点 ,提出了四辊轴式混凝土整平机的设计方案 ,介绍了四辊轴式混凝土整平机的整体结构 ,并对其关键的摊铺振实机构进行了重点分析 ,给出了主要技术参数的选择及设计方法     

Phytoplankton dynamics related to water mass properties in the Gulf of Gabes: Ecological implications

The spatial distribution of chlorophylls and carotenoids was recorded throughout the Gulf of Gabes (South Ionian Sea) in March 2007, and was related to patterns of the physical structure and the nutrient concentrations.Two distinct water masses were identified based on the temperature and salinity (T–S) analysis: a cool and less salty Modified Atlantic Water (MAW) and a saltier Mediterranean Mixed Water (MMW). There was no significant difference in the mean nitrogen and phosphate concentrations between MMW and MAW, although the silica values were significantly higher in MAW. The Integrated chlorophyll a mean value was about 4 mg m^? 2, with a maximum of 13 mg m^? 2 at MAW stations.Higher Chlorophyll a records in typical MAW stations were mainly due to chlorophytes, which contributed up to 58% of the pigments concentrations in the MAW and about 46% in the MMW. The contribution of chlorophytes to total Chlorophyll a was found to be relatively stable throughout the water column. The contribution of diatoms, which were twofold higher in the MMW than in the MAW, did not exceed 17% of chlorophyll a and was mainly due to subsurface maxima. The chlorophytes, pelagophytes, prymnesiophytes and cryptophytes all together accounted for more than 77% of total chlorophyll a in the MAW and about 67% in the MMW.There were statistically significant differences between MMW and MAW in the pigment contribution of cyanobacteria and pelagophytes. These two taxa accounted for 13% and 24% of chlorophyll a respectively in the MAW and MMW indicating that these differences concerned phytoplankton classes at relatively low contributions to total chlorophyll a.