货车制动梁运用故障分析及对策

重点对槽钢弓型杆制动梁目前存在的运用故障进行了分析,并针对故障原因提出了改进措施及建议。     

70 m跨二铰型上承式桁架混凝土拱桥的施工技术

介绍70 m双铰型上承式桁架拱桥的施工和在施工阶段监测监控的内容及方法,可供类似工程建设参考。     

基于WSEIAC模型的主要部件可靠性和维修性对舰艇动力装置效能的影响分析

舰艇动力装置的复杂化、自动化程度的提高使得其可靠性和维修性等指标越来越成为制约其效能发挥的重要因素,而动力装置效能的发挥将直接影响作为作战武器平台的舰艇的战斗力的发挥,因此分析影响动力装置效能发挥的因素具有十分重要的意义。文章通过分析确立了动力装置的系统边界和系统状态,运用WSEIAC模型确定了动力装置系统效能与其主要组成系统的可靠性和维修性之间的关系,通过灵敏度分析给出了其关系曲线并进行了分析,得出了动力装置主要组成系统的最佳可靠性和维修性参数值,拓展了WSEIAC模型的应用范围,对于开展舰艇动力装置效费分析也具有重要的参考价值。     

特殊条件下的真空预压密封技术

结合广州港南沙港区二期工程软基处理工程实例,针对在局部有抛石地段的软土采取真空预压方法加固时传统的挖密封沟和施打淤泥搅拌墙技术存在相当大困难的情况,提出了在有抛石地段采取高压旋喷桩密封技术。实测结果表明,采取该技术密封效果良好,真空度能达到设计要求。与堆载方案相比,采取本技术经济效益良好,具有较好的推广价值。     

务实对待纺织品后配额时代的格局

本文预测了后配额时代世界某些国家可能出现的针对中国纺织品出口的种种新的限制措施，分析了取消配额对我国纺织品出口的利弊，从而提出了中国纺织行业出口所应采取的对策。     

电子商务税收问题研究

电子商务的迅速发展，使传统的税收征管体系已不能适应，本文从分析电子商务对传统的税收征管的影响着手，给出了基于电子商务环境下的税收征管应对措施。     

密级配沥青混凝土合理级配研究

详细论述了按照最大理论密度标准级配设计出的密级配沥青混合料的技术特点，以及体现在沥青混凝土路面使用性能方面的优越性。总结出密级配沥青混凝土合理级配设计的技术要求和判定标准。     

Growth of urban transportation: Peoples republic of China

The Peoples Republic of China, with its great urban populations, is finding it necessary to develop a range of strategies to deal with increasing demand for goods and people movement, increasing motorization and the increasing congestion that results from the increasing travel demand. This paper discusses strategies being adopted in two northern cities, Changchun and Shenyang. Both transit and roadway programs are examined for Changchun. Problems and successes of a new toll road are examined for Shenyang. Sustained infrastructure investment is essential to assure the necessary mobility for economic growth.     

江淮气旋大风预报研究

江淮气旋大风预报研究的结果表明：气旋大风的预报实际上就是冷空气南下造成地面加压与气旋东移造成地面降压，这两个因素所造成气压梯度发展变化地以预报。还介绍用天气学原理建立的大风预报模式，以及用数理统计方法判别有无强风的预报，经过历史拟合和试报，在预报气旋大风中有一定的准确性。     

Transit assignment under crowded conditions

This paper presents a transit assignment algorithm for crowded networks. Both congestion in vehicles and queuing at stations are explicitly taken into account in predicting passenger flows for a fixed pattern of origin-destination trip demands. The overflow effects due to insufficient capacity of transit lines are considered to be concentrated at transit stations, while the in-vehicle congestion effects (or discomforts) are considered to be dependent on in-vehicle passenger volume. Overflow delay at a transit station is dependent on the number of excess passengers required to wait for the next transit car. We use a logit model to determine the split between passengers that chose to wait for the next transit car and passengers that chose to board on the alternative transit lines. The proposed algorithm predicts how passenger will choose their optimal routes under both queuing and crowded conditions.