评价沥青胶结料疲劳性能的试验方法

主要介绍了国外研究较为成熟的两种评价沥青胶结料疲劳性能的试验方法,以及两种方法的试验原理和过程,并分析了G＊sinδ与DER指标在评价疲劳性能方面的有效性.     

Performance Evaluation of Hybrid-Drive Buses and Potential Fuel Savings in Brazilian Urban Transit

Transporting more than 55 million passengers per day, buses are the main transit mode in Brazil. Most of these vehicles use diesel oil and this situation causes dependence on oil, extensive greenhouse gas emissions and increasing air pollution in urban areas. In order to improve this situation the options for Brazilian cities include the use of alternative fuels and new propulsion technologies, such as hybrid vehicles. This article proposes a procedure for evaluating the performance of a recently developed Brazilian hybrid-drive technology. A simple procedure is presented to compare hybrid-drive buses with conventional diesel buses in urban operation focusing on fuel economy and the potential for reducing diesel oil consumption through the use of hybrid-drive buses. Field tests carried out by the authors indicate that fuel consumption improvement through the use of hybrid-drive buses would certainly exceed 20%, resulting in lower fuel costs and reduced carbon dioxide (CO₂) emissions.     

液压马达实验方法研究

介绍了液压试验分类方式,根据其独具的特点对在用液压马达性能试验加载方法进行分析,并分类对工程机械用各种液压马达在泵工况下进行试验的可行性进行了探讨.     

刮水/洗涤器试验装置

介绍长丰汽车公司自制的刮水/洗涤器试验装置的功能和构成,论述其上位机、下位机和水路系统的工作原理。     

自动变速器控制技术研究

自动变速器的控制技术影响到变速器使用性能,介绍现代控制理论在自动变速器控制中的应用,如换档点控制,变矩器闭锁离合器控制,换档质量控制,适应性控制,模糊控制,容错控制等理论。     

钢桥面板顶板-纵肋连接接头的疲劳性能

对钢桥面板整体模型进行了有限元分析。结果表明,顶板横向应力在横桥向的分布表现出类似弹性支承多跨连续梁的受力特点,且顶板横向应力基本全部为弯曲应力,膜应力很小,在顶板-纵肋连接处纵肋应力远小于顶板横向应力。顶板-纵肋连接处的应力纵向和横向影响线很短,疲劳验算可不考虑同一车辆轴重间的相互影响及多车效应。增加顶板厚度可大大降低顶板的应力幅,铺装层的完整性对钢桥面板十分重要。此外,还对该类型接头的疲劳分级及现行欧洲规范Eurocode和美国规范AASHTO LRFD的相关条款进行了分析。为考虑车辆荷载通过引起的非成比例多轴疲劳效应,轮荷载滚动加载足尺模型试验和分析方法需要进一步深入研究。     

Impact of inerter nonlinearities on vehicle suspension control

This paper discusses the nonlinear properties of inerters and their impact on vehicle suspension control. The inerter was recently introduced as an ideal mechanical two-terminal element, which is a substitute for the mass element, where the applied force is proportional to the relative acceleration across the terminals. Until now, ideal inerters have been applied to vehicle, motorcycle and train suspension systems, in which significant performance improvement was achieved. However, due to the mechanical construction, some nonlinear properties of the existing mechanical models of inerters are noted. This paper investigates the inerter nonlinearities, including friction, backlash and the elastic effect, and their influence on vehicle suspension performance. A testing platform is also built to verify the nonlinear properties of the inerter model.     

The effects of wheelset driving system suspension parameters on the re-adhesion performance of locomotives

In this study, in order to examine the effects of a wheelset driving system suspension parameters on the re-adhesion performance of locomotives, the stick–slip vibration was analysed according to theoretical and simulation analysis. The decrease of the slip rate vibration amplitude improved the stability of the stick–slip vibration and the re-adhesion performance of locomotives. Increasing the longitudinal guide stiffness of the wheelset and the motor suspension stiffness were proposed as effective measures to improve the re-adhesion performance of locomotives. These results showed that the dynamic slip rate was inversely proportional to the series result of the square root of the longitudinal guide and motor suspension stiffness. The larger the motor suspension stiffness was, the smaller the required longitudinal guidance stiffness was at the same re-adhesion time once the wheel slip occurred, and vice versa. The simulation results proved that the re-adhesion time of the locomotive was approximately proportional to amplitude of the dynamic slip rate. When the stick–slip vibration occurred, the rotary and the longitudinal vibrations of the wheelset were coupled, which was confirmed by train's field tests.     

韩国高速列车防撞设计与评估

针对韩国高速列车(KHST)的防撞性能进行深入地研究。选定行驶速度为110km·h-1的列车与一个15t重的刚性障碍物的撞击、两列行驶速度为30km·h-1的列车相撞作为严重撞击的事故场景,两列行驶速度为8km·h-1的列车相撞作为轻度撞击的事故场景。用有限元方法对KHST的防撞性进行了数学评估。一维和二维的仿真分析表明该车整体上具有良好的耐撞性。同时,对动车的前端部分做了三维壳体单元的仿真分析。使用安全带的旅客伤亡试验的结果说明KHST的良好性能足以在设置的事故场景中保护旅客的安全。最后,用实比例的撞击试验对仿真方法进行了验证。     

地铁列车组动车配置对其性能的影响

详细介绍了地铁列车组中动车所占比例不同对列车组牵引性能、常用电制动性能、轮轨间黏着系数和平均旅行速度的影响;67%动车编组和50%动车编组的轮轨间黏着系数利用相当,全动车编组和67%动车编组的最大起动加速度、最大常用电制动减速度、平均旅行速度相当;从平均旅行速度方面来考虑,最高运行速度在100km/h以下时,50%动车编组是一种比较经济合算的编组。