Exciting forces for a wave energy device consisting of a pair of coaxial cylinders in water of finite depth

Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by these two cylinders,which were considered as idealization of a buoy and a circular plate,can be considered as a wave energy device.The wave energy that is created and transferred by this device can be appropriately used in many applications in lieu of conventional energy.Method of separation of variables was used to obtain the analytical expressions for the diffracted potentials in four clearly identified regions.By applying the appropriate matching conditions along the three virtual boundaries between the regions,a system of linear equations was obtained,which was solved for the unknown coefficients.The potentials allowed us to obtain the exciting forces acting on both cylinders.Sets of exciting forces were obtained for different radii of the cylinders and for different gaps between the cylinders.It was observed that changes in radius and the gap had significant effect on the forces.It was found that mostly the exciting forces were significant only at lower frequencies.The exciting forces almost vanished at higher frequencies.The problem was also investigated for the base case of no plate arrangement,i.e.,the case having only the floating cylinder tethered to the sea-bed.Comparison of forces for both arrangements was carried out.In order to take care of the radiation of the cylinders due to surge motion,the corresponding added mass and the damping coefficients for both cylinders were also computed.All the results were depicted graphically and compared with available results.     

使大型轿车实现30km／L最高燃效的双马达式混合动力系统

本田2013年6月开始销售的大型混动轿车“雅阁混动版”的混合动力系统是一项技术革新,打破了传统的单马达式、双马达式技术的常识,虽然配备在大型车上,但却实现了接近丰田“普锐斯”（32．4kin／L）的燃效值。     

基于多变量灰色模型的路基沉降预测

路基沉降变形是一个复杂的动态变化过程,常用的单变量预测模型不能考虑各沉降监测点间的相关性,不足以反映路基整体的变形规律。多变量灰色模型是单变量GM(1,1)模型在多元变量条件下的拓展,可以实现对路基中相互影响的多个监测点变形预测模型的建模和预测。实例计算表明,与单变量GM(1,1)模型相比,多变量灰色模型具有更高的预测精度,显示了该方法进行路基工后沉降预测的有效性。     

隧道钻爆法施工进度模型的分析建立及应用

通过对钻爆法施工中各工序的分析,建立施工进度模型,找出影响施工进度的变量参数,通过对变量参数实施有效控制,实现工程进度的量化管理.     

基于有限元分析的垃圾车车厢多级油缸支座结构优化

油缸支座是自卸式垃圾车车厢内的主要受力部件,在满足强度要求和保证一定安全系数的条件下,通过有限元方法对其进行结构优化,找到油缸支座质量最小的最佳结构参数,进而达到节约原材料、降低成本的目的。     

HWTW-160／64液压拖缆机的一个非典型故障

某轮为我国最先进的专业救助船舶,其配备的HWTW-160／64x2型液压拖缆机分上下两个卷筒,额定拉力在第一级速度时可达到1600KN,刹车力3000KN,容绳量64×1010米（钢缆）,配有3个双速液压马达。可在驾驶台遥控操纵和机旁就地操纵,功能强大,在历次重大救助任务中屡立战功。     

船用遥控阀门摆动液压马达的设计

随着全球经济和海洋运输业的发展,遥控阀门系统成为大型化、高自动化船舶中必须配置的设备之一,而阀门驱动器则是实现船用阀门遥控系统国产化的关键部件.针对船用阀门驱动器的研制,分析比较了几种液压马达的结构形式、优缺点和适用场合,结合船用特点设计了一种带制动装置的螺旋摆动液压马达作为船用阀门遥控系统中的阀门驱动装置,并就该螺旋摆动液压马达的结构、驱动控制和主要技术进行了设计.     

结构拓扑优化设计的组合算法

根据最优载荷传递路线的概念及其搜索方法,较简便地获得比原问题给定的拓扑结构要小的次拓扑结构Td;在不会遗漏最优拓扑解的前提下,使寻优拓扑空间缩小.相对原问题,Td体现了最优传力性质.根据文中的删杆策略,在每次迭代中,可有效地定出‘被删杆件集',按离散变量结构截面优化的组合算法[1]的模式对Td进行离散变量拓扑优化.最后给出了算例,以证明本文方法的有效性和可靠性.     

考虑残余强度修正的混凝土冻融损伤层及轴心受压模型研究

采用符合实际冻融环境的气冻气融试验方法,对混凝土受冻后损伤度的评估及轴心受压模型进行了系统研究.根据超声波平测法确定混凝土冻融损伤层厚度,以损伤层作为混凝土冻融损伤度评价指标,并考虑损伤层内的残余强度,引入损伤层修正系数α,提高了损伤度评估的可靠性;讨论损伤演化规律,建立了基于冻融损伤层的混凝土轴心受压本构模型.研究结...     

磁滞式电缆卷缆装置的应用与改进

磁滞式电缆卷缆装置是一种理想的电缆卷绕设备,它与常用的配重式、力矩马达式电缆卷筒相比,具有体积小、安装维修方便、近似恒张力、无需安装制动器、具有良好的自制动功能、电缆卷筒运行可靠、能长期堵转而不损坏等优点。