下穿黄河砂卵石地层盾构隧道管片结构受力特征现场测试

为研究砂卵石地层中管片的力学行为,以兰州地铁1号线穿黄段为研究对象,采用改良的测试传感器走线方式,对管片内力及外部水压力进行现场测试,并进行相应的数值模拟。将现场测试数据与数值模拟结果对比分析,得出如下结论:1)外部水压力及管片内力受盾构施工影响最为显著的范围为距掌子面3~5环,在此范围内应加强对受拉区的监测,并采取相应措施防止管片在施工初期破损;2)外部水压力及管片内力在距掌子面6~13环时受施工影响逐渐降低,距掌子面13环后趋于稳定;3)运用梁-弹簧模型设计管片是偏于安全的,但应充分考虑施工荷载。     

扬州瘦西湖隧道通风系统设计

扬州瘦西湖隧道为穿过国家5A级风景名胜区的单管双层隧道,为了解决洞口环保问题,采用SES对隧道内通风量和污染物浓度进行了模拟计算,结合洞口污染物扩散范围和环境敏感点分布情况,确定了上下层隧道均采用竖井排出式的纵向通风方式;针对烟气沉降速度快的特点,优化了横断面布置,在盾构段和部分明挖段设置排烟道,采用重点排烟的方式,人员安全可用疏散时间提高了1倍,并且在疏散楼梯间采用了上下层分别设置加压送风机的方式,确保了烟气不会进入非事故隧道,极大地提高了人员的安全性。     

锦屏二级水电站深埋特大引水隧洞关键技术

Seven tunnels across Jinping Mountain are arranged for Jinping Ⅱ Hydropower Station, with a total length of about 120 km. Among them, four headrace tunnels have a length of 16.67 km, an excavated diameter of 12.4-14.6 m, and a cover depth of 1 500-2 000 m in general. The maximum cover depth is 2 525 m, and the maximum external water pressure is more than 10 MPa. The tunnels are featured by great length, great depth and large diameter. It is the largest and most difficult among the underground tunnel groups built or under construction in China and even the world. With complex hydrogeological conditions and special topographical conditions along the tunnels, many challenging problems, such as rock burst under high in situ stresses, groundwater inrush in karst strata and failure of loading bearing structure, were encountered during construction. A great amount of groundbreaking studies were carried out regarding these problems. The key technical problems during construction of extremely large and deep tunnels were solved successfully. Safe and rapid tunnel construction and stable operation were achieved. The hydropower station started operation in 2014 and has been in a safe and stable operation state. The successful construction of headrace tunnels of Jinping Ⅱ Hydropower Station can provide some experiences and reference for deep tunnel projects in the world.     

内河航道工程财务效益探讨

以杭嘉湖航道网改造工程为实例,采用敏感性分析和概率分析的方法,分别按改扩建项目和新建项目,探讨不同收费方式下内河航道工程的财务效益。研究结果表明,运量大的长湖申线有一定的财务效益,项目自身具有生存能力,但运量小的六平申线,财务效益差,投资决策应注重其社会效益。     

地铁车站超宽深基坑内既有高架桥梁桩基托换关键技术研究

佛山地铁2号线换乘车站张槎站基坑宽50.3 m,深16.9 m,局部位于既有禅西大道桥下（净高仅7 m）。为解决低矮空间下超宽深基坑支护、既有高架桥桩基托换等难题,提出如下技术措施： 1)采用高桩承台桩基托换技术对位于车站中央桥桩进行托换,托换承台高于车站基坑面,基坑内支撑穿过新旧桩基形成对撑,内支撑与新旧桩相对独立; 2)地下连续墙幅宽调整为4 m,采用小型钻机成槽,以改善桥下施工工艺; 3)地下连续墙与两侧既有桩之间增加防塌孔措施; 4)基坑内支撑均采用混凝土支撑并加临时立柱以增加内支撑稳定性。以上措施解决了托换体系与车站基坑相互影响的问题,确保了低矮空间下超宽深基坑施工安全及既有桩基的安全。经数值计算论证、现场施工验证,提出的超宽深基坑内既有高架桥梁桩基托换关键技术是合理、安全、可行的。     

高速铁路隧道支护参数的计算研究

为探索隧道初期支护安全系数的计算问题,并为高速铁路隧道支护参数优化提供理论依据,根据喷锚支护的性能与特点以及现代隧道力学的基本理论,建立初期支护荷载结构模型和对应的安全系数计算方法; 针对时速350 km高速铁路双线隧道提出的3种不同的初期支护方案（无系统锚杆支护、喷锚结合支护和以锚为主的支护方案）展开适应性研究,计算分析不同埋深（400 m和800 m）条件下初期支护的优化参数以及优化后的二次衬砌承载能力,在此基础上提出优化后的高铁隧道支护参数建议值,并对优化前后的安全系数进行计算与对比。主要结论如下： 1）提出了采用围岩压力代表值作为荷载结构模型设计荷载的方法,为解决设计中围岩压力不确定的问题提供了思路,且所推荐的围岩压力代表值计算方法具有安全性与经济性; 2）提出了3种初期支护计算模型,可以为初期支护构件的选择与量化设计提供一定的理论基础; 3）提出了时速350 km高速铁路双线隧道初期支护方案及优化后的复合式衬砌设计参数,并明确了不同围岩级别、不同埋深时的承载主体; 4）提出了按照不同埋深进行支护结构参数设计的建议。     

Great Revolution in Maritime Transportation: Discussion on Preliminary Work and Operation Plan of Bridge/Tunnel Projects for Vacuum HTS Maglev Train at High Speed（畅想海上交通运输建设的伟大革命——真空高温超导磁浮高速列车桥隧工程前期工作与运行方案探讨）

The improvement in the operation speed of the transportation project means the progress and development of the construction technologies in transportation projects. In this paper, the following factors restricting the further improving of the speed of high speed railway are analyzed: as the operation speed increases, the trains in the dense atmosphere are subject to the wind induced resistance and various resistances caused by the friction between the wheels and the rails and by the irregularity of tracks, and the noise will also increase with a high power. Therefore, the economy and safety issues involved in the operation have become the main factors restricting the further improving of the speed of high speed railway. A scheme of vacuum pipelines of underwater vacuum tunnel and/or subwater bridge is proposed in this paper: the pipelines and cars are sealed and vacuated to form the quasi vacuum. The transportation system of the vacuum maglev train at ultrahigh speed with the HTS maglev technology can achieve the operation speed more than 4 times that of the existing HSR train (about 1 200 km/h). Key technologies for constructing the vacuum maglev tunnels/subwater bridges in respect of construction plans, vacuating and sealing, as well as maglev trains are introduced in this paper. The subjects to be further studied on the vacuum HTS maglev tunnels (pipelines) are analyzed from the aspects of technology, management, construction costs, operation expenses, candidate project, airtight materials for cars and evacuation in case of emergencies. It is recommended that "cross sea maglev train in vacuum tunnel" should be developed in the eco tourism project between the coastal cities and their neighboring islands and a series of necessary technical tests should be conducted during the trial operation, so as to obtain related experience. Based on the experience and lessons learned, the transportation system at ultrahigh speed may be implemented for strait crossing projects in China. Finally, a brief introduction to the research on HSR trains at ultrahigh speed in countries such as China, the United States and the Netherlands is presented in this paper. The development of vacuum pipeline transportation can drive the development of China′s transportation modes in a faster, safer and more energy efficient manner, facilitating the development of the fifth generation of transportation industry and its driving role in the social and economic development, and promoting the integration and progress of the economy of China or even the world at a higher speed.     

车站基坑揭露断层带注浆加固效果数值模拟研究

为研究注浆对明挖基坑揭露断层带的加固效果,以南京地铁上元门车站基坑工程为背景,考虑基坑开挖过程中渗流场与围岩应力场的相互耦合作用,建立相应的有限元分析模型,对软弱破碎层、注浆加固带、基坑地下连续墙以及围岩所组成的耦合系统进行模拟,研究注浆加固前后围岩渗流场、位移场以及应力场的特征,最终获得基坑地下连续墙的水平位移、基坑外地表沉降、围岩塑性区分布、基坑内围岩变形以及基坑内涌水量变化规律。研究结果表明： 1）通过对基坑底部断层带的注浆加固,基坑侧向位移及基坑外地表沉降均得到有效控制,相比于注浆加固前,其最大水平位移和地表累计沉降量减小50%以上,满足工程要求; 2）基坑底部区域内塑性区范围明显减少,基坑外塑性区扩散也得到有效抑制; 3）基坑底部断层带注浆改变了渗流场分布,有效降低了基坑涌水量,基坑治理区域涌水量由最初的94 m3/h逐渐减小到4 m3/h,堵水率达96%; 4）注浆结束后现场钻孔取芯率达到75%~80%,开挖揭露大量劈裂作用形成的浆脉,验证了注浆可有效治理明挖基坑所揭露的软弱断层破碎带。     

郑万高铁隧道大型机械化配套全断面法施工围岩-支护结构相互作用力学特性研究

为研究郑万高铁大型机械化配套全断面法施工围岩-支护结构相互作用力学特性,依托郑万高铁隧道现场实测数据,确定台阶法和大型机械化配套全断面法2种工法施工的围岩压力分布特征,并采用数值模拟的方法建立围岩-支护结构有限元模型,分析2种工法对围岩压力和结构内力的影响规律。研究结果表明： 1)台阶法多次施工扰动易导致支护结构和围岩之间产生空隙而发生脱空,大型机械化配套全断面法施工对围岩扰动次数少,初期支护快速封闭成环,可保证初期支护及围岩之间良好的密贴性; 2)在软弱围岩中,采用大型机械化配套全断面法施工比台阶法更有利于改善结构受力,减缓结构内部偏心受压的程度,能有效发挥拱形隧道结构承载力; 3)大型机械化配套全断面法在软弱围岩快速施工、控制支护结构变形、保证支护结构受力安全等方面具有综合优势。     

郑万高铁大型机械化施工隧道位移控制基准研究

依托郑万高铁湖北段大断面隧道洞群,针对其开挖断面面积大、软弱围岩占比高、采用大型机械化大断面法施工的特点,开展初期支护位移现场监控量测,对监控量测数据进行分类统计、包络回归分析,得到Ⅳ、Ⅴ级围岩深、浅埋不同大断面法（全断面法、微台阶法）开挖下初期支护位移沿隧道纵向的函数表达式及各工况下分段位移占极限位移的比值。最后结合 Q/CR 9218-2015《铁路隧道监控量测技术规程》中初期支护极限位移值,给出郑万高铁大型机械化施工隧道各工况下初期支护位移控制基准建议值。结果表明： 郑万高铁隧道Ⅳ、Ⅴ级围岩采用深、浅埋不同大断面法开挖时,按距掌子面距离的分阶段位移控制基准相差较大,现行Q/CR 9218-2015《铁路隧道监控量测技术规程》中统一规定不合理;围岩级别、埋深及开挖方法相同时,拱顶沉降和洞周水平收敛规律基本一致。