At-sea towing of a Mega-Float unit

A huge floating offshore platform (359m long, 60m wide, and 3m deep) was towed into the Pacific Ocean for a validation experiment for a floating airport. Full-scale measurements of towline tension and the bending strain on the upper-deck were made during towing. The measured bending moment agreed well with numerical calculation without taking the draught and towing speed into consideration.     

水工模型试验的流速测量方法与数据处理程序

在水工模型试验中,基础数据的准确度与精确度直接关系到科研成果的质量。流速是模型试验中观测的主要数据之一。模型流速的测量方法有许多种,如示踪物法、光电法、声学多普勒法等。光电法是目前水工模型试验中应用最多的流速测量方法。文章所述的模型测杆流速处理程序实现的功能就是计算流速测杆采集流速的平均值并直观地以流速过程线图显示。通过应用于上海国际航运中心洋山港区整体物理模型试验的实践表明,程序采用微调方法,解决了判断涨落潮时存在的问题,提高了水工模型试验工作的精度和效率,为科学决策提供了依据。     

地铁车辆段地下固定式架车机组设计接口与包容性分析

地下固定式架车机组是地铁车辆段的关键设备,介绍地下固定式架车机组的功能及组成,分析该设备在地铁车辆段土建及各系统设计时与各专业的接口,并提出设计时各专业间的设备界面划分,论述地下固定式架车机组的包容性设计,保证其施工图设计的顺利开展。     

On the application of hydraulic theory to the deep-water flow through the Irbe Strait

A flow-dependent critical-point method for investigating topographically controlled flow in natural channels is applied to the bottom current through the Irbe Strait connecting the Baltic proper and the Gulf of Riga. This approach is based on the functional formalism due to Gill [Gill, A.E., 1977. The hydraulics of rotating-channel flow. J. Fluid Mech., 80, 641–671.], and here is used for the stratified flow structure observed during the IRBEX-95 field campaign. A critical section of the realizable flow regime was found to be located slightly downstream of the most pronounced horizontal constriction of the channel. The predicted baroclinic volume flux 7200 m³ s⁻¹ overestimates the observed mean bottom-water transport by around 30%, a discrepancy which most likely can be explained by the lack of sea level conditions and friction in the model.     

Integrated coastal water monitoring

Geographical Information Systems (GIS) are important took for environmental monitoring and management. However, their limitations in dealing with complex, dynamic, and mission‐critical situations call for alternative approaches. Integrating GIS with dynamic simulation models offers one such solution. Numerical models that simulate physical, chemical, and biological processes greatly increase our understanding of the environment. Many of these models use refined forecast information to accurately predict processes that help in monitoring and managing the environment. Integrating these models with GIS offers new functionalities. The present research couples the MIKE21 comprehensive modeling system for two‐dimensional free surface flows with the spatial analysis strengths of the ArcView GIS. The southern coastal water system of Singapore serves as the study area. The aim is to develop a comprehensive software system that provides support for both environmental managers and land‐use planners in making their decisions.     

An ABS control logic based on wheel force measurement

The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre–road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force.

The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficient.     

洗扫车清扫液压系统热平衡研究

针对洗扫车作业过程中液压油温过高造成的液压系统运转不正常的问题,在理论分析的基础上运用AMESim软件建立液压系统的热力学模型,对其热平衡特性进行仿真分析,并依据仿真结果为清扫液压系统匹配合适的散热器。在建立模型的基础上,针对产热和散热部件进行优化分析,为液压部件选型提供参考。仿真结果表明,优化方案合理。     

海上平台中央空调系统噪声分析和降噪方案研究

文章通过惠州21—1B平台中央空调系统测试和改进实践，对该系统的噪声进行了分析，并提出了相应的降噪方案。     

A model-based traction control strategy non-reliant on wheel slip information

A traction control system (TCS) for two-wheel-drive vehicles can conveniently be realised by means of slip control. Such a TCS is modified in this paper in order to be applicable to four-wheel-drive vehicles and anti-lock braking systems, where slip information is not readily available. A reference vehicle model is used to estimate the vehicle velocity. The reference model is excited by a saw-tooth signal in order to adapt the slip for maximum tyre traction performance. The model-based TCS is made robust to vehicle modelling errors by extending it with (i) a superimposed loop of tyre static curve gradient control or (ii) a robust switching controller based on a bi-directional saw-tooth excitation signal. The proposed traction control strategies are verified by experiments and computer simulations.     

区级海绵城市建设规划中指标管控方法探讨

针对区级海绵城市建设规划中管控单元划分和指标分解等关键环节,提出最小管控单元和管控指标源头-系统两级分解体系.上海市虹口区的案例表明,最小管控单元可有效衔接源头地块、控规单元和排水系统,管控指标源头-系统两级分解体系可有效体现系统性工程在海绵指标中的贡献,合理减轻源头项目的达标压力.