地铁车辆段地下固定式架车机组设计接口与包容性分析

地下固定式架车机组是地铁车辆段的关键设备,介绍地下固定式架车机组的功能及组成,分析该设备在地铁车辆段土建及各系统设计时与各专业的接口,并提出设计时各专业间的设备界面划分,论述地下固定式架车机组的包容性设计,保证其施工图设计的顺利开展。     

On the application of hydraulic theory to the deep-water flow through the Irbe Strait

A flow-dependent critical-point method for investigating topographically controlled flow in natural channels is applied to the bottom current through the Irbe Strait connecting the Baltic proper and the Gulf of Riga. This approach is based on the functional formalism due to Gill [Gill, A.E., 1977. The hydraulics of rotating-channel flow. J. Fluid Mech., 80, 641–671.], and here is used for the stratified flow structure observed during the IRBEX-95 field campaign. A critical section of the realizable flow regime was found to be located slightly downstream of the most pronounced horizontal constriction of the channel. The predicted baroclinic volume flux 7200 m³ s⁻¹ overestimates the observed mean bottom-water transport by around 30%, a discrepancy which most likely can be explained by the lack of sea level conditions and friction in the model.     

Integrated coastal water monitoring

Geographical Information Systems (GIS) are important took for environmental monitoring and management. However, their limitations in dealing with complex, dynamic, and mission‐critical situations call for alternative approaches. Integrating GIS with dynamic simulation models offers one such solution. Numerical models that simulate physical, chemical, and biological processes greatly increase our understanding of the environment. Many of these models use refined forecast information to accurately predict processes that help in monitoring and managing the environment. Integrating these models with GIS offers new functionalities. The present research couples the MIKE21 comprehensive modeling system for two‐dimensional free surface flows with the spatial analysis strengths of the ArcView GIS. The southern coastal water system of Singapore serves as the study area. The aim is to develop a comprehensive software system that provides support for both environmental managers and land‐use planners in making their decisions.     

An ABS control logic based on wheel force measurement

The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre–road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force.

The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficient.     

洗扫车清扫液压系统热平衡研究

针对洗扫车作业过程中液压油温过高造成的液压系统运转不正常的问题,在理论分析的基础上运用AMESim软件建立液压系统的热力学模型,对其热平衡特性进行仿真分析,并依据仿真结果为清扫液压系统匹配合适的散热器。在建立模型的基础上,针对产热和散热部件进行优化分析,为液压部件选型提供参考。仿真结果表明,优化方案合理。     

海上平台中央空调系统噪声分析和降噪方案研究

文章通过惠州21—1B平台中央空调系统测试和改进实践，对该系统的噪声进行了分析，并提出了相应的降噪方案。     

A model-based traction control strategy non-reliant on wheel slip information

A traction control system (TCS) for two-wheel-drive vehicles can conveniently be realised by means of slip control. Such a TCS is modified in this paper in order to be applicable to four-wheel-drive vehicles and anti-lock braking systems, where slip information is not readily available. A reference vehicle model is used to estimate the vehicle velocity. The reference model is excited by a saw-tooth signal in order to adapt the slip for maximum tyre traction performance. The model-based TCS is made robust to vehicle modelling errors by extending it with (i) a superimposed loop of tyre static curve gradient control or (ii) a robust switching controller based on a bi-directional saw-tooth excitation signal. The proposed traction control strategies are verified by experiments and computer simulations.     

区级海绵城市建设规划中指标管控方法探讨

针对区级海绵城市建设规划中管控单元划分和指标分解等关键环节,提出最小管控单元和管控指标源头-系统两级分解体系.上海市虹口区的案例表明,最小管控单元可有效衔接源头地块、控规单元和排水系统,管控指标源头-系统两级分解体系可有效体现系统性工程在海绵指标中的贡献,合理减轻源头项目的达标压力.     

低功率氙光单元组的开发

以华晨V5车型氙光组为例,通过选取光源、挡板和参数,设计多椭球反射杯,并运用ASAP进行配光模拟,从而实现氙光单元的开发设计.最后通过PAS单元进行实际配光模拟和样件实车夜视对比分析,得出配有25W低功率氙光单元照明系统的车辆具有更佳的照明效果.     

温度对旋转钻进破岩功耗的影响研究

岩石在常温、常压下的变形破坏理论已非常成熟，但随着钻探深度不断的增加，岩石将要面临高地温、高围压的环境，这些因素将直接影响钻进过程。通过研究旋转钻进过程中能量的传递转移，建立岩石破碎的简化模型，利用单位体积破岩能耗来探究温度对钻进过程的影响。研究结果表明:随着钻进深度的增加，在一定的围压作用下，温度升高而岩石的弹性模量却逐渐减小，压入深度随温度升高呈抛物线形上升，破岩功耗随温度呈曲线上升，并在经过阀值温度400℃后趋于平缓。