往复式压缩机系统的管道振动分析

从动力分析角度，通过对往复式压缩机引起管道振动原因的分析，提出控制管道振动的方法；以海上已投产平台管道布置为例进行振动分析，通过计算管道因脉动引起管道振动的不平衡力，确定抑制管道振动的最佳方法。     

转K2型转向架弹簧载荷识别及其对弹簧寿命影响的研究

用试验的方法得到在垂直载荷作用下弹簧45°方向应力和最大主应力之间的差异,用有限元法计算了弹簧在横向、垂向加载时的载荷识别系数。根据线路实测动应力识别出转K2型转向架弹簧在运用工况下的2种载荷。最后根据载荷计算出弹簧的应力,利用疲劳损伤模型计算出损伤,得出了2种载荷对疲劳寿命的影响。     

海上单桩风力发电平台简化设计

采用在欧洲已经进行商业化运作的独立桩双段结构，桩基础采用带有过渡段的单桩。塔架上的风力发电机采用丹麦Vestas公司的V80风力发电机。参考DNV-OS-J101和API-RP-2A中的工作应力设计法，进行结构静力、桩基础的承载力，涡激振动、疲劳寿命，结构动力学等分析。静力分析分析极端环境下的组合工况；桩基础主要计算桩的轴向承载力和校核水平承载力，并采用有限元模型模拟桩土相互作用；涡激振动分析主要考虑不同风速下塔架的升力以及引起的横向振动；疲劳分析根据涡激振动分析的结果利用S-N曲线对基础寿命进行了评估；动力学分析求出了结构的固有频率，并进行了波浪力作用下的瞬态历程分析。     

工程机械柴油机的匹配选择

为选择适应工程机械使用特点的柴油机，对工程机械配套的柴油机选型方式进行了概括分析，着重介绍在柴油机对比选择时的关键性能参数。说明了工程机械用柴油机抗过载能力的特殊要求，总结出通过性能参数和曲线的对比来匹配选择柴油机的方法。     

京秦线提速路涵过渡段动力仿真与试验对比

结合京秦线提速改造工程进行了列车 路基动力仿真计算。在不同速度条件下,通过对路涵过渡段加固前后状态下机车车辆运行安全舒适性指标、轨道及路基主要动力性能指标的分析计算,对京秦既有线路涵过渡段提速到200km/h的适应性及加固方案的可行性提出了相应评价意见与建议,并与随后的实车试验进行了对比。试验测试结果验证了仿真分析的可靠性。     

Dynamics of ships running aground

A comprehensive dynamic model is presented for analysis of the transient loads and responses of the hull girder of ships running aground on relatively plane sand, gravel, or rock sea bottoms. Depending on the seabed soil characteristics and the geometry of the ship bow, the bow will plow into the seabed to some extent. The soil forces are determined by a mathematical model based on a theory for frictional soils in rupture and dynamic equilibrium of the fluid phase in the saturated soil. The hydrodynamic pressure forces acting on the decelerated ship hull are determined by taking into account the effect of shallow water. Hydrodynamic memory effects on the transient hull motions are modeled by application of an impulse response technique. The ship hull is modeled as an elastic beam to determine the structural response in the form of flexural and longitudinal stress waves caused by the transient ground reaction and hydrodynamic forces. A number of numerical analysis results are presented for a VLCC running aground. The results include bow trajectory in the seabed, time variation of the grounding force, and the maximum values of the sectional shear forces and bending moments in the hull girder.     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

NL法在板桩墙计算中的应用

在水平荷载作用下的板桩墙的计算中,应用非线性方法——NL法来考虑桩土的相互作用,利用相似原理求出桩的受力特性,并举出算例。计算过程证明NL法是一种简单快捷的方法。     

现代船舶动力定位系统设计

围绕现代动力定位系统的设计问题,讨论系统的构建、数学建模、控制器设计和推力器的推力分配,重点给出了基于扩展Kalman滤波的动力定位LQG控制器设计算法。