有线载波技术在汽车数据传输中的应用研究

研究了有线载波技术在汽车数据传输中的应用，通过汽车内的电力线同时实现了供电以及数据的安全传输。     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

汽车传动系统机械故障诊断方法的研究

本文针对汽车传动系统主要零部件的特点，研究了基于振动信号的故障诊断方法，包括特征提取、模式分类和诊断决策全过程。     

汽车轮胎结构非线性有限元分析

本文综述了轮胎力学的发展历史与现状，阐明了轮胎结构分析的几各主要方法、研究内容及其优缺点，并重点介绍了在子午三维非线性有限元结构分析方面的工作，包括轮胎的充气，竖直加载、稳态滚动、滚动阻力及温度场分析，给出了相应的算例。由于采用一些新的方法和技术，考虑了更真实的轮胎材料模型，结构和载荷，使得分析更为有效、精确，分析结果可作为轮胎的设计，试验与改进的依据。     

发动机试验数据管理系统的开发应用

介绍了发动机试验数据库管理系统的工作原理、结构、功能，发动机试验数据的处理、绘图及试验报告的生成；对系统开发及开发过程中的若干难点进行论述。实践已验证了该系统的正确性、实用性和高效性。     

国内外汽车碰撞计算机模拟研究的现状及趋势

本文论述和剖析了国内外利用计算机进行汽车碰撞模拟和建立汽车、乘员及汽车安全约束系统数学模型的研究进展。提出了我国开展汽车碰撞计算机模拟研究的发展趋势和应解决的问题。     

汽车的力学参数与稳态转向特性

本文以汽车力学参数试验台测出的数据为基础，为通过建立轮胎侧偏角，车厢侧倾角，回正力矩与侧向加速度之间的关系，运用最小二乘法对测试数据进行线性曲线拟合，找出了这些数据与汽车记转向特性之间的关系，并按国家标准ＧＢ／Ｔ３０４７－９１中的有关规定对被测试车辆的稳态转向特性进行了评价 。     

车用催化转化器流动阻力影响因素的研究

流动阻力是车用催化转化器的重要性能之一。作者对载体结构参数，入口扩张管和出口收这三个因素进行了试验研究，并对载体通道的流动进行了理论分析，提出了一种计算载体流动阻力的方法。研究结果表明，载体结构参数和扩张管锥角对流动阻力影响显著，而收缩管锥角的影响不明显，在载体结构参数中，减小载体壁厚是降低催化器阻力的有效措施。     

轿车悬架阻尼二阶最优控制设计方法研究

本文以半动悬架与二阶最优控制理论为基础，通过被动悬架阻尼的主动力表示，结合对最优控制力的分解以及最优评价指标，振动加速功率谱密函数与系统振动阻尼之间的关系的研究，建立了多自由度汽车振动系统在随机输入下以振动加速度功率谱密度函数极小为目标的悬架最优减振器阻尼参数的方法，并给出了７自由汽车振动最优减振器阻尼设计实例。     

汽车发动机气道内的流动模拟计算

本文介绍了汽车发动机气道内三维定常可压缩流动数值模拟的模型、算法及算例。为达到能定量分析并应用于实际设计的目的,提出了一种新的计算网格划分法,并开发了计算软件,对提高计算精度、加速收敛等关键问题进行了探索。