Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.     

Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.     

进气掺氢与富氧燃烧对汽油机性能影响的试验研究

在JL3G10汽油机的基础上,搭建了发动机台架以进行掺氢富氧条件下的台架试验。利用该台架分别对不同进气含氧量(体积比),不同进气掺氢比以及富氧掺氢时汽油机的动力性与排放进行了试验研究。研究表明:相比原机,进气含氧量为25%时汽油机功率与扭矩提高了20.7%,HC排放减少36%,CO排放减少10.6%,但NOx排放增加了149.6%;2%进气掺氢比下的HC排放相比原机降低31.2%,CO排放降低46.1%,NOx排放则增加12.6%;富氧掺氢(氢氧体积比为2∶1)时,掺混比例为5.06%的汽油机较原机在动力性与排放上均有提升。     

浅议诊断性测试在高职英语教学中的应用

诊断测试能有效地诊断出英语教学中存在的弱点,它是评价英语教学的一个有效手段。文章在介绍诊断测试概念的基础上,分析一次实际进行的诊断性测试。根据测试结果发现存在的问题并以此来改进高职荚语教学的模式。     

区域道路运输相对效率截面分析

随着区域路网的完善,其承载的道路运输业也呈现快速发展态势。在区域层面上,实现两者的良性互动,需要因地制宜,实现区域与运输业阶段性的协调决策,进而保证在全社会范围内对优化资源配置。这些分析的实现需要合适的评价方法对道路运输业投入要素与产出要素间的内在关系进行深入研究,并能对投入、产出要素进行量化控制。本文引入数据包络分析方法（Data Envelopment Analyses,简称DEA方法）,采用CCR模型（Charnes,Cooper and Rhodes Model）以各区域道路运输为决策单元;构筑各区域道路运输生产前沿面,评价各单元的相对效率,分析各要素投入的变动对产出的影响。     

假设检验在沥青混凝土路面厚度检验中的应用

对概率论中的假设检验的方法进行了介绍,并将此方法应用在沥青混凝土路面厚度单点合格率的检验中.     

路基工程质量问题的成因及处治措施

路基是公路的重要组成部分,是按照路线位置和一定技术要求修筑的带状构造物,承受由路面传来的荷载,应具有足够的强度、稳定性和耐久性。路基的强度与稳定性,受水、温度、土质等客观因素影响,同时也受行车荷载的作用,路基设计、施工方法及养护方法是否正确也制约着路基的质量。     

公路建设中的环境问题探讨

对公路建设环境保护作了比较深入地分析与探讨,总结归纳了公路施工环境保护工作的重点与措施。     

泡沫沥青冷再生基层力学性能的试验研究

对现场泡沫沥青冷再生基层的力学性能进行了研究,主要内容有根据泡沫沥青的性能指标确定了泡沫沥青的制备条件;根据国内对基层强度的要求和国外的规程,进行了无侧限抗压强度试验和间接抗拉劈裂强度试验,确定了最佳泡沫沥青用量,评价了泡沫沥青冷再生基层的力学性能。     

城市交通公平性分析及对策

城市道路的交通公平性有利于建设和谐、公平的城市,在交通公平的定义以及它的三层含义的基础上,陈述了交通公平在时间、空间和内容上的内涵。分析城市道路交通公平的影响因素及其判断标准,阐述了快速公交符合城市道路交通公平的判断标准是它有利于大多数人的出行,满足弱势群体的出行要求,并应具有低成本、高质量的优点。最后,以北京市BRT的实践表明快速公交是提高城市交通公平性的有效措施。