基于MATLAB的整车可靠性评价

本文根据某汽车公司近3年来所做的整车可靠性试验数据,借助可靠性理论方法与数理统计手段,利用matlab软件编程,分析了该厂所生产的QE6440型轻型客车的故障规律,阐述了该车质量上所存在的问题,并找出了影响其可靠性水平的主要因素,最后对提高该车型的质量提出了相应的技术对策。     

汽车电气系统研究与探讨

对车载电气系统用电量迅速增加的趋势进行了讨论，阐述了提高车载电气系统电压值的解决途径和方案，采用42V电压值的车载电气系统既能满足电器和电子设备用电功率增加的需要，又便于使用现代技术对电子、电器元件和人身进行有效保护。给出了42V电压值车载电气系统的结构布置方案，并对其实施时间作了预测。分析了采用42V电压值的车载电气系统面临的挑战和发展动向。     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

汽车轮胎结构非线性有限元分析

本文综述了轮胎力学的发展历史与现状，阐明了轮胎结构分析的几各主要方法、研究内容及其优缺点，并重点介绍了在子午三维非线性有限元结构分析方面的工作，包括轮胎的充气，竖直加载、稳态滚动、滚动阻力及温度场分析，给出了相应的算例。由于采用一些新的方法和技术，考虑了更真实的轮胎材料模型，结构和载荷，使得分析更为有效、精确，分析结果可作为轮胎的设计，试验与改进的依据。     

国内外汽车碰撞计算机模拟研究的现状及趋势

本文论述和剖析了国内外利用计算机进行汽车碰撞模拟和建立汽车、乘员及汽车安全约束系统数学模型的研究进展。提出了我国开展汽车碰撞计算机模拟研究的发展趋势和应解决的问题。     

汽车的力学参数与稳态转向特性

本文以汽车力学参数试验台测出的数据为基础，为通过建立轮胎侧偏角，车厢侧倾角，回正力矩与侧向加速度之间的关系，运用最小二乘法对测试数据进行线性曲线拟合，找出了这些数据与汽车记转向特性之间的关系，并按国家标准ＧＢ／Ｔ３０４７－９１中的有关规定对被测试车辆的稳态转向特性进行了评价 。     

车用催化转化器流动阻力影响因素的研究

流动阻力是车用催化转化器的重要性能之一。作者对载体结构参数，入口扩张管和出口收这三个因素进行了试验研究，并对载体通道的流动进行了理论分析，提出了一种计算载体流动阻力的方法。研究结果表明，载体结构参数和扩张管锥角对流动阻力影响显著，而收缩管锥角的影响不明显，在载体结构参数中，减小载体壁厚是降低催化器阻力的有效措施。     

轿车悬架阻尼二阶最优控制设计方法研究

本文以半动悬架与二阶最优控制理论为基础，通过被动悬架阻尼的主动力表示，结合对最优控制力的分解以及最优评价指标，振动加速功率谱密函数与系统振动阻尼之间的关系的研究，建立了多自由度汽车振动系统在随机输入下以振动加速度功率谱密度函数极小为目标的悬架最优减振器阻尼参数的方法，并给出了７自由汽车振动最优减振器阻尼设计实例。     

汽车发动机气道内的流动模拟计算

本文介绍了汽车发动机气道内三维定常可压缩流动数值模拟的模型、算法及算例。为达到能定量分析并应用于实际设计的目的,提出了一种新的计算网格划分法,并开发了计算软件,对提高计算精度、加速收敛等关键问题进行了探索。     

交通综合信息平台建设研究

建立一个基于GIS-T的交通综合信息平台。它能够接受、存储和处理多源异构数据．能够为各种应用子系统和公众提供良好的信息服务。同时，对平台的框架设计、功能构成以及平台实现的关键技术进行说明和分析。