汽车发动机冷却系统计算机辅助设计

本文在前人已有成果的基础上，综合归纳了目前描述汽车散热器热力性能和阻力性能的常用计算模型，并结合大量的实验研究结果，建立了用于各类计算的性能数据库，在此基础上，编制了发动机冷却系统的ＣＡＤ软件。     

快速凝固铝合金在汽车工业中应用现状及发展

采用快速凝固技术制备的铝合金，具有优良的力学性能，可作为汽车的高性能轻质材料。本首先介绍了快速凝固铝合金的性能特点，其次介绍了该铝合金的制备工艺，最后介绍了该铝合金在汽车工业上的应用实例及其应用展望。     

论当代车文化的内涵

按照文化人类学的解释，人类所创造的文化大致可分为物质文化、制度文化和精神文化三个层次。作为陆路交通工具的车，对推动社会经济的发展发挥了不可估量的作用，并直接导致人们生产、生活方式发生改革。本文从这三个层次出发，详细解析了当今车文化在各层次中体现的基本内涵。     

双轴汽车模型下某车型的振动分析

将双轴汽车多自由度模型简化成四自由度的平面模型,忽略了车轮部分质量及刚度的影响。把质量m的车身等效的分解为前后轴以及质心C上的三个集中质量m2f、m2r及m2c,这三个质量由无质量的刚性杆进行连接。分析在该模型下振动输入对车身垂直和俯仰运动的影响,重点研究在有阻尼情况下双轴汽车模型的偏频和振型分析。     

汽车车身焊接技术的研究进展

众所周知,石油是不可再生能源,同时受全球环境影响,节能减排势在必行,汽车轻量化研究将是汽车工业发展主要研究方向。文章介绍了汽车车身焊接中运用到的传统焊接技术,并对国内外新型的车身焊接技术发展进行综述。为汽车车身轻量化设计提供了新的焊接思路。     

国内外混合动力客车动力总成方案此较研究

简要介绍混合动力客车动力总成方案分类，重点介绍国内、外典型的混合动力客车动力总成方案；通过对国内、外方案动力总成方案的比较，提出推广我国混合动力客车的建议。     

基于“1+X”证书制度的汽车类专业人才培养模式创新研究——以新能源汽车技术专业为例

文章主要是在“1+X”证书制度视角下,以新能源汽车技术专业为例,将“1+X”证书制度运用到汽车类专业人才培养模式中,更有效地提高汽车类专业人才培养质量。基于“1+X”证书的人才培养方案创新是在已有的教学模式基础上,深化教育教学改革,构建实训考核平台,加强教师队伍建设,并在实训过程中重视理论与实践的结合,将学生的理论知识运用到实践中,从而培养真正优秀的新能源汽车专业人才。     

浅析无尘化施工管理在轿车涂装车间建设中的应用

文章通过无尘化施工管理在轿车涂装车间建设中的应用,从人、机、料、法、环五个方面分析了建设过程中存在的问题,通过一系列无尘化管理举措的实施,有效改善了涂装车间建设过程中的污染,为后期量产过程奠定了基础,确保了项目按期顺利完成验收。     

ISG hybrid powertrain: a rule-based driver model incorporating look-ahead information

According to European regulations, if the amount of regenerative braking is determined by the travel of the brake pedal, more stringent standards must be applied, otherwise it may adversely affect the existing vehicle safety system. The use of engine or vehicle speed to derive regenerative braking is one way to avoid strict design standards, but this introduces discontinuity in powertrain torque when the driver releases the acceleration pedal or applies the brake pedal. This is shown to cause oscillations in the pedal input and powertrain torque when a conventional driver model is adopted. Look-ahead information, together with other predicted vehicle states, are adopted to control the vehicle speed, in particular, during deceleration, and to improve the driver model so that oscillations can be avoided. The improved driver model makes analysis and validation of the control strategy for an integrated starter generator (ISG) hybrid powertrain possible.     

Development of a semi-empirical friction model in automotive driveshaft joints

High speed and sport utility vehicles with large joint articulation angle demand lower friction in automotive driveshaft joints to meet noise and vibration comfort levels. Thus a more thorough understanding of internal friction characteristics and mechanisms is required. In this paper, a friction model in automotive driveshaft joints was developed through the use of test data from an instrumented Constant Velocity (CV) joint friction apparatus with actual driveshaft assemblies. Experiments were conducted under different realistic operating conditions of oscillatory speeds, CV joint articulation angles, lubrication, and torque. The experimental data was used to develop a physics-based semi-empirical CV joint internal friction model as a function of different CV joint operating parameters. It was found that the proposed friction model captures the experimental results well. Also the friction model estimates the generated axial force (GAF) in tripod CV joints well, which is the main source of force that causes vehicle vibration problems.