北京地铁9号线通风空调系统节能示范

作为北京市城市轨道交通节能示范线,在北 京地铁 9 号线实际工程建设中,对通风空调系统运行 模式与自动控制优化、直接蒸发式空调系统、空气—水 通风空调系统以及集成冷冻站等多项节能技术进行探 索与示范应用。通过对这些技术的节能原理、应用方 案以及使用效果的分析与介绍,为今后相关工程的建 设提供技术借鉴与参考。     

地下施工柴油机喷油泵的使用

喷油泵是柴油机燃油供系统的重要部件，针对地下施工中的实际情况，提出了加强使用维护以保证喷油泵正常工作的几种方法及注意事项。     

北京城市交通发展战略研究

本文综合分析了北京城市交通现状，运用生产力布局的理论对北京城市交通拥堵的原因进行分析，探索了国内外大城市交通发展的最新趋势，根据发展“首都经济”的要求．提出解决北京城市交通拥堵问题，必须采取标本兼治，并提出北京城市交通发展战略研究的有关建议。.     

地下连续墙作为桥梁基础在软土地区的应用

本文以上海浦东国际机场1号桥的设计为背景,介绍了地下连续墙做为桥梁基础的计算模型的建立、计算参数的取值以及构造处理措施。结果表明:当条件受限制时,地下连续墙不失为一种较好的基础型式。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

Analytical and simulation approaches to understand combined effects of transit signal priority and road-space priority measures

Transit signal priority (TSP) may be combined with road-space priority (RSP) measures to increase its effectiveness. Previous studies have investigated the combination of TSP and RSP measures, such as TSP with dedicated bus lanes (DBLs) and TSP with queue jump lanes (QJLs). However, in these studies, combined effects are usually not compared with separate effects of each measure. In addition, there is no comprehensive study dedicated to understanding combined effects of TSP and RSP measures. It remains unclear whether combining TSP and RSP measures creates an additive effect where the combined effect of TSP and RSP measures is equal to the sum of their separate effects. The existence of such an additive effect would suggest considerable benefits from combining TSP and RSP measures. This paper explores combined effects of TSP and RSP measures, including TSP with DBLs and TSP with QJLs. Analytical results based on time-space diagrams indicate that at an intersection level, the combined effect on bus delay savings is smaller than the additive effect if there is no nearside bus stop and the traffic condition in the base case is under-saturated or near-saturated. With a near-side bus stop, the combined effect on bus delay savings at an intersection level can be better than the additive effect (or over-additive effect), depending on dwell time, distance from the bus stop to the stop line, traffic demand, and cycle length. In addition, analytical results suggest that at an arterial level, the combined effect on bus delay savings can be the over-additive effect with suitable signal offsets. These results are confirmed by a micro-simulation case study. Combined effects on arterial and side-street traffic delays are also discussed.     

An analysis of rail freight operational efficiency and mode share in the British port-hinterland container market

The growth in container shipping poses considerable challenges to efforts to reduce the negative externalities associated with freight transport. There are particular concerns about the impacts of the associated port-hinterland freight flows. Through empirical research, this paper examines trends in the operational efficiency of the British port-hinterland container rail freight market and to assess the impacts of any changes on the overall sustainability of this market. Original survey work conducted in 2007 and 2015 has allowed longitudinal and cross-sectional analysis of the characteristics of this market.The survey findings reveal that rail’s mode share of port container throughput (in TEU) has increased from 14.7% in 2007 to 16.6% in 2015 and it is likely that its share of the associated hinterland activity has also risen. Rail was carrying 25% more TEU by 2015 without an increase in train service provision. Increases in mean train capacity and mean load factor were observed, leading to growth in the mean train load from 44 TEU in 2007 to 55 TEU in 2015. This considerable improvement in operational efficiency is expected to have reduced the negative externalities per unit of transport activity associated with the rail-borne hinterland container flows, though scope is identified for further improvements in sustainability.     

Planning hierarchical urban transit systems for reductions in greenhouse gas emissions

Public transit systems with high occupancy can reduce greenhouse gas (GHG) emissions relative to low-occupancy transportation modes, but current transit systems have not been designed to reduce environmental impacts. This motivates the study of the benefits of design and operational approaches for reducing the environmental impacts of transit systems. For example, transit agencies may replace level-of-service (LOS) by vehicle miles traveled (VMT) as a criterion in evaluating design and operational changes. In previous work, we explored the unintended consequences of lowering transit LOS on emissions in a single-technology transit system. Herein, we extend the analysis to account for a more realistic case: a transit system with a hierarchical structure (trunk and feeder lines) providing service to a city where demand is elastic. By considering the interactions between the trunk and the feeder systems, we provide a quantitative basis for designing and operating integrated urban transit systems that can reduce GHG emissions and societal costs. We find that highly elastic transit demand may cancel emission reduction potentials resulting from lowering LOS, due to demand shifts to lower occupancy vehicles. However, for mass transit modes, these potentials are still significant. Transit networks with buses, bus rapid transit or light rail as trunk modes should be designed and operated near the cost-optimal point when the demand is highly elastic, while this is not required for metro. We find that the potential for unintended consequences increases with the size of the city. Our results are robust to uncertainties in the costs and emissions parameters.     

A novel approach for the modelling of air quality dynamics in underground railway stations

Indoor air quality in subterranean train stations is a concern in many places around the globe. However, due to the specificity of each case, numerous parameters of the problem remain unknown, such as the braking discs particle emission rate, the ventilation rate of the station or the complete particle size distribution of the emitted particles. In this study the problem of modelling PM₁₀ concentration evolution in relation with train traffic is hence addressed with a particle-mass conservation model which parameters are fitted using a genetic algorithm. The parameters of the model allow to reproduce the dynamics and amplitude of four field data sets from the French and Swedish underground contexts and comply with realistic bounds in terms of emissions, deposition and ventilation rate.     

轨道交通预制U形梁力学性能研究

以青岛蓝色硅谷城际轨道交通高架桥预制U形梁为工程背景,运用有限元方法对比分析先张法和后张法预制U形梁内力、应力状态及变形3方面的力学性能。对先张法和后张法U形梁进行静载试验,详细分析试验荷载下U形梁的刚度及抗裂性等指标。结果表明,先张法预应力U形梁力学性能优越,具有推广应用潜力。