对提高天津地铁双林站折返能力的研究

地铁是一种大容量、高效率的城市交通方式,而折返能力则是制约地铁通过能力的关键因素.分析天津地铁运营的具体情况,指出双林站折返能力的不足之处,提出3种改进方案;通过方案比选,选定"在双林站前增加一条渡线"的可行性措施,可以彻底改善该站的折返能力.结论:只有从硬件和软件两方面结合起来共同考虑,才能最大限度地提高列车的折返能力,充分发挥地铁的运输效能.     

改进振动法在地下工程动力时程计算中的应用

地下工程受到周围土体的约束作用,其动力反映与地面工程有所区别,如将源于地面工程的振动法用于地下工程的动力时程计算分析,需要进行相应的改进.文章通过计算分析发现,振动法用于地下工程动力时程计算时,在计算模型边界条件和波动传播时间效应方面不能反映波动对地下工程作用的实质；通过对比分析,在这两个方面对常规振动法进行了改进；提出了适用于地下工程动力时程计算的改进振动法.该方法的计算模型采用左右两侧粘弹性底部固定的人工边界条件,波动输入采用能够反映波动传播时间效应的分层加速度动态输入法,其计算分析结果与理论解吻合较好,适用于地下工程的动力时程计算分析.     

Breakthrough innovations in intermodal freight transport

Breakthrough innovations, whether technological, organizational or both, are a necessity if the market share of intermodal freight transport is to expand. The main growth potential lies in the markets for flows over short distances, for perishable and high-value commodities, for small consignments, and for flows that demand speed, reliability and flexibility. It will take radical innovations to produce a breakthrough in the modal split and allow these new markets to be conquered. This special issue is based on papers presented at an international conference on freight transport automation and multimodality, held in Delft in May 2002, that are illustrative of the direction of breakthrough research and development (R&D) aimed at increasing the market share for intermodal transport.     

Discussions on rail in urban areas and rail history

This paper includes discussions on rail in urban areas and railway history. More specifically commonly used terms and definitions for rail services, policy and practice in urban areas are discussed followed by an overview of railway developments around the world.     

Use of combinatorial auctions in the railway industry: Can the “invisible hand” draw the railway timetable?

Rail capacity is currently administratively allocated in Europe, whereas the economic literature has often contemplated the opportunity of introducing market mechanisms, auctions in particular, into this industry. This article tries to fill the gap between practice and theory. It first describes the properties of rail capacity (rigidity and non-homogeneity) and shows that because of its very nature, this capacity must be allocated through combinatorial auctions. As identified by the economic literature, using combinatorial auctions introduces a lot of complexity (winner determination and information burden) into the allocation process. To deal with this complexity, some form of centralized planning is necessary to design the right market mechanisms and to allocate capacity. This could have strong consequences on the current deregulation process.     

RS20型交换机的配置方法

对RS20交换机的配置进行探索研究具有很强的实用性,重点介绍了RS20交换机在轨道交通无线通信系统中的应用,通过不断的实践摸索,初步掌握了一套快速配置RS20交换机的方法,并对这种配置方法进行了探讨.     

Will a driving restriction policy reduce car trips?—The case study of Beijing,China

A driving restriction policy, as one of the control-and-command rationing measures, is a politically acceptable policy tool to address traffic congestion and air pollution in some countries and cities in the world. Beijing is the first city in China to implement this policy. A one-day-a-week driving restriction scheme was expected to take 20% of cars off the road every week day. Using household survey and travel diary data, we analyze the short-term effect of this driving restriction policy on individual travel mode choice. The data also allow us to identify which demographic groups are more likely to break the restriction rule. The estimates reveal that the restriction policy in Beijing does not have significant influence on individuals’ decisions to drive, as compared with the policy’s influence on public transit. The rule-breaking behavior is constant and pervasive. We found that 47.8% of the regulated car owners didn’t follow the restriction rules, and drove “illegally” to their destination places. On average, car owners who traveled during peak hours and/or for work trips, and whose destinations were farther away from the city center or subway stations, were more likely to break the driving restriction rules. Therefore, Beijing is probably in need of more comprehensive and palatable policy instruments (e.g., a combination of congestion tolls, parking fees, fuel taxes, and high-speed transit facilities) to effectively alleviate traffic congestion and air pollution.     

Using Focus and NomiNal Group Techniques for a Better Understanding of the Transit Disadvantaged Needs

The research presented in this paper explores the context, method, and value of focus group research in transit needs assessments. Group participatory research can generate data that are not easily obtained by other methods. The paper focuses on lessons from three Nebraska communities whose transit disadvantaged rely on community-based paratransit services. Because of the size of the paratransit population and the inability to control who showed up to the focus group sessions, a modified group research protocol was adopted in order to garner information from whomever attended the session. The population parameters and the number of people at the meetings were anticipated by the researchers and mitigated by incorporating nominal group techniques. Research findings from the focus group sessions are discussed paying particular attention to the candid and policy-specific comments made by the focus group participants. The paper concludes with an application of focus group research in transit planning.     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.     

桥梁美学在城市高架道路中的应用

随着我国国民经济的飞速发展,城市基础设施建设日新月异。在此前提下,“以人为本,环境和谐”的景观设计变得尤为重要。城市大型桥梁从单一的交通通道,逐渐演变为城市的风景。上海市中环线高架桥梁运用了桥梁美学的原则,在桥梁结构、桥梁细部构造上进行了精心的景观设计,该文对此进行了简要地介绍。