小松EC210Z—1空气压缩机的使用与修理

本文简要介绍了日本小松公司 EC210Z-1空气压缩机的参数、工作原理及特点,着重对故障进行了分析,介绍了修复方法.     

液力变矩器叶片设计的准三维理论与方法

本文推导了适合于液力变矩器叶片设计的S_1流面改进流线曲率法计算方程,提出了流场判别准则和环量分配原则。在此基础上,提出了用多个S_1流面积叠进行变矩器叶片设计的准三维方法,以及在传统的叶片设计方法中加入流场计算环节的叶片设计新途径。并把利用本文提出的设计方法和利用传统的设计方法所设计出来的YB300变矩器进行了特性试验对比,结果表明:新提出的设计方法与传统方法所设计出的变矩器相比,最高效率提高了1.80%,而其它性能基本相同。     

基于遗传算法的水平轴海流发电机叶片优化方法

提出一种基于遗传算法优化(GA)的水平轴海流发电机叶片优化方法,采用Xfoil和BEMT作为分析工具,适用于二维翼型和三维叶片的多目标优化,并以此为基础编写一套叶片优化程序。该优化方法在增加叶片获能效率和减小推力方面具有显著效果,同时对于翼型性能的提升也同样出色。     

耙吸式挖泥船黏土耙头刀齿形态及排布方式

借助LS-DYNA数值模拟方法研究耙吸式挖泥船耙头刀齿的形态及刀齿的排布方式对挖掘过程的影响,分析不同结构耙齿的宏观切削效果和切削过程中的微观动态响应特性。结果表明:相比平齿刀具,尖齿刀具的切削阻力有所降低,切削土体的效果较好;多齿刀具在切割土块时,土体更易破碎,切削效率更高;在相同条件下,尖齿错排刀具的切削效率要强于平齿错排刀具。由此可见,实际工程中,进行耙头刀齿设计时遵循多尖齿错排的原则在一定程度上可提高耙吸式挖泥船对黏土的破碎效率。     

履带式推土机推土装置—面向对象设计的研究

在履带式推土机推土装置设计中，采用面向对象设计新手段，可把设计者的智慧、经验、标准与计算机的可视化编程技术有机的相结合，使设计者实时、直观地获得推土装置的方案设计、方案分析和计算结果及根据结果绘制的AutoCAD图形。     

混流喷水泵内流场及叶片数匹配数值研究

以混流式喷水推进泵为研究对象,应用三维Navier-Stokes方程和Spalart-Allmaras单方程模型,以NUMECA数值平台进行了喷泵内部流动的数值模拟。文章介绍了喷泵的全工况特性和其内部流动状况随流量的变化情况,而后调整动、静叶片数的匹配状况,了解动、静叶叶栅稠度的改变对喷泵性能和内部流场的影响,最终得出最优的动静叶片数组合。     

推土机液压系统故障树分析

采用故障树分析法，对ＴＹ１２０推土机液压系统故障原因进行分析，为提高液压系统的可靠性提出有效的措施     

路面铣刨机转子

介绍了路面铣刨机转子的功用及其基本结构,分析了各种结构的设计思想及优缺点,提出了一种转子刀具的排列方法.     

Monitoring blade loads for a floating wind turbine in wave basin model tests using Fiber Bragg Grating sensors: A feasibility study

The blade loading contains sufficient information about the unsteady aerodynamics of Floating Wind Turbines (FWTs), and it serves as the basis for advanced controller developments. Wave basin model test is among the most reliable and economical methods for FWT investigations. However, few FWTs were reported being able to monitor the blade loads during wave basin tests. The main obstacles include strict space/mass limitations in model manufacturing and problems associated with signal transmission between rotating blades and stationary signal processing unit. In this paper, the feasibility of detecting blade loads for model FWT in wave basin tests is investigated. An on-line monitoring system is developed based on Fiber Bragg Grating (FBG) sensors and a Fiber Optical Rotary Joint (FORJ). Extensive validation tests are conducted under different environmental and operational conditions. Results show that the proposed FBG-FORJ sensing system presents impressive feasibility and reliability. As the authors know, it is among the first attempts to monitor the blade loads in real-time for model FWTs in wave basin tests. The present study will serve to enrich the knowledge about unsteady aerodynamics of FWTs and lay the foundation for experimental studies on advanced FWT controllers.