不等高接触悬挂在同一组软横跨上的处理方案

针对株洲客车站北咽喉第5次提速改造和兼顾浙赣线引入线接触线高度6450mm改造的特殊要求,通过分析比较不等高接触悬挂在软横跨上的处理模式,提出经济合理、高效便捷的处理方案,为今后此类施工提供借鉴。     

基于闭环力反馈原理的非线性液压主动阻尼悬架模型的研究及优化设计

本文在理论上建立了一套基于主动力反馈原理的新型主动阻尼悬架的设计和优化方法。首先提出了该主动阻尼悬架的实现模型，该模型是在传统的液力减振器的基础上，应用半主动控制的思想，结合力反馈的原理建立起来的内部液压反馈阻尼网络模型。理论优化分析和计算机仿真表明，通过该液阻网络模型，即可以实现电控的主动阻尼悬架的功能，它可以根据汽车行驶路况的好坏，自适应地调节悬架阻尼大小以实现主动阻尼悬架的最优控制。     

Multiphysic modelling of railway vehicles equipped with pneumatic suspensions

This article presents a multidisciplinary approach of railway pneumatic suspension modelling: both multibody and pneumatic aspects are taken into account. The work aims at obtaining a realistic model of the secondary suspension and coupling it with a multibody model of a train. Various components of the pneumatic circuit such as bellows, tanks, pipes and valves are taken into account. The article focuses on the bellow-pipe-tank subsystem for which several modelling approaches are presented and compared. Differences between differential and algebraic models are highlighted, and an application-dependent choice between them is suggested. A complete model of the pneumatic circuit is then obtained and coupled with a multibody model of the train. As a result, the behaviour of a suburban train equipped with a pneumatic secondary suspension is analysed, in particular undesired oscillating motions which affect the comfort. Topological modifications and improvements of the suspension are also investigated and discussed.     

两种底架设备悬挂座的对比分析

针对目前城轨车辆底架设备悬挂的现状,分析焊接悬挂座在应用中存在的问题,结合焊接悬挂座的结构,设计改进出一种新的不锈钢铸造悬挂座,并从多个角度对比焊接与铸造方案,通过对比验证新方案的合理性。     

基于LMS自适应滤波的模糊控制主动悬架研究

以车辆操纵稳定性及行驶平顺性为控制目标，根据路面一车辆系统的特点，提出一种在线可调整的模糊控制算法，利用LMS自适应模块调整模糊控制器的自调整因子，改善单一模糊控制算法对专家先期经验的依赖。针对简化的车辆模型，以路面信号作为激励源，进行悬架系统的振动控制研究，结果表明提出的算法对车辆悬架系统的振动控制具有较好的适应性。     

永磁式磁悬浮列车系统研究

在分析磁县浮机理的基础上，着重介绍了永磁式磁悬浮列车系统，提出了零功率控制器的设想，给出了分析和仿真结果。     

Fuzzy and adaptive fuzzy control for the automobiles’ active suspension system

Two typical criteria for good vehicle suspension performance are their ability to provide good road handling and increased passenger comfort. The main disturbance affecting these two criteria is terrain irregularities. Active suspension control systems reduce these undesirable effects by isolating car body motion from vibrations at the wheels. This paper describes fuzzy and adaptive fuzzy control (AFC) schemes for the automobile active suspension system (ASS). The design objective is to provide smooth vertical motion so as to achieve the road holding and riding comfort over a wide range of road profiles. The efficacy of the proposed control schemes is demonstrated via simulations. With respect to the optimal linear quadratic regulator (LQR), it is shown that superior results have been achieved by the AFC.     

Enhancing grey prediction fuzzy controller for active suspension systems

A grey prediction fuzzy controller (GPFC) was proposed to control an active suspension system and evaluate its control performance. The GPFC employed the grey prediction algorithm to predict the position output error of the sprung mass and the error change as input variables of the traditional fuzzy controller (TFC) in controlling the suspension system to suppress the vibration and the acceleration amplitudes of the sprung mass for improving the ride comfort of the TFC used; however, the TFC or GPFC was employed to control the suspension system, resulting in a large tire deflection so that the road-holding ability in the vehicle becomes worse than with the original passive control strategy. To overcome the problem, this work developed an enhancing grey prediction fuzzy controller (EGPFC) that not only had the original GPFC property but also introduced the tire dynamic effect into the controller design, also using the grey prediction algorithm to predict the next tire deflection error and the error change as input variables of another TFC, to control the suspension system for enhancing the road-holding capability of the vehicle. The EGPFC has better control performances in suppressing the vibration and the acceleration amplitudes of the sprung mass to improve the ride quality and in reducing the tire deflection to enhance the road-holding ability of the vehicle, than both TFC and GPFC, as confirmed by experimental results.     

An Original Feedback Control with a Reversible Electromechanical Actuator Used as an Active Isolation System for a Seat Suspension. Part I: Theoretical Study

This paper provides an overview of a theoretical study of an active seat suspension. The principal objective of this study is to improve ride passenger comfort by reducing transmitted seat acceleration. The seat is represented by a non-linear two degree of freedom model. The system is linearized for small perturbations around the equilibrium. To control the dynamic of the seat suspension, an original feedback control command with a reversible electromechanical actuator is achieved. The synthesis of the regulator is realized on the linearized model of the seat suspension and the root locus method is employed. Stability and robustness characteristics have been studied. Numerical simulations in time and frequency domain show the interests of the regulator and its capability to isolate seat passenger.     

Impact of inerter nonlinearities on vehicle suspension control

This paper discusses the nonlinear properties of inerters and their impact on vehicle suspension control. The inerter was recently introduced as an ideal mechanical two-terminal element, which is a substitute for the mass element, where the applied force is proportional to the relative acceleration across the terminals. Until now, ideal inerters have been applied to vehicle, motorcycle and train suspension systems, in which significant performance improvement was achieved. However, due to the mechanical construction, some nonlinear properties of the existing mechanical models of inerters are noted. This paper investigates the inerter nonlinearities, including friction, backlash and the elastic effect, and their influence on vehicle suspension performance. A testing platform is also built to verify the nonlinear properties of the inerter model.