超大跨度双跨钢桁梁悬索桥动力特性分析和模态试验

以跨径布置460 m+1480 m+491 m的一座双跨钢桁梁悬索桥结构为工程背景,充分考虑结构几何非线性效应、大位移非线性效应等因素的影响,建立了算例桥梁的MIDAS空间有限元分析模型,对基本动力特性进行了仿真分析和结构振动试验测试;对成桥结构进行动力特征参数测试,并与理论计算值进行了对比分析,该桥实测动力特征参数与对应理论计算值基本吻合,且测试值大于理论计算值,这表明成桥结构实测刚度大于理论设计目标值。     

Roll- and pitch-plane coupled hydro-pneumatic suspension

Passive fluidically coupled suspensions have been considered to offer a promising alternative solution to the challenging design of a vehicle suspension system. A theoretical foundation, however, has not been established for fluidically coupled suspension to facilitate its broad applications to various vehicles. The first part of this study investigates the fundamental issues related to feasibility and properties of the passive, full-vehicle interconnected, hydro-pneumatic suspension configurations using both analytical and simulation techniques. Layouts of various interconnected suspension configurations are illustrated based on two novel hydro-pneumatic suspension strut designs, both of which provide a compact design with a considerably large effective working area. A simplified measure, vehicle property index, is proposed to permit a preliminary evaluation of different interconnected suspension configurations using qualitative scaling of the bounce-, roll-, pitch- and warp-mode stiffness properties. Analytical formulations for the properties of unconnected and three selected X-coupled suspension configurations are derived, and simulation results are obtained to illustrate their relative stiffness and damping properties in the bounce, roll, pitch and warp modes. The superior design flexibility feature of the interconnected hydro-pneumatic suspension is also discussed through sensitivity analysis of a design parameter, namely the annular piston area of the strut. The results demonstrate that a full-vehicle interconnected hydro-pneumatic suspension could provide enhanced roll- and pitch-mode stiffness and damping, while retaining the soft bounce- and warp-mode properties. Such an interconnected suspension thus offers considerable potential in realising enhanced decoupling among the different suspension modes.     

T型梁吊装方式的改进

传统T型梁吊装方式多采用捆绑式,其存在很多弊病,采用新型的吊装方式可方便工人的操作,增加施工的安全性,也可增大T型梁的提升高度,保证安装顺利进行。     

电磁永磁混合磁悬浮列车的磁铁结构优化设计

根据力学模型提出了增大混合磁铁磁轭高度以提高承载力的方法,从承载能力、可控性及永磁工作点3个角度展开对混合磁铁结构参数的优化分析。理论分析及仿真结果表明,适当增大永磁截面积在满足系统承载力要求的同时能提高磁铁可控性;合理选取永久磁铁的截面积和厚度参数能保证磁铁工作在最大能积点。     

浅析武广客专弹性链形悬挂中负弛度问题

对武广客运专线接触网安装中出现的负弛度现象进行了探讨和分析,总结出导致该现象的原因,并提出相应的改进建议。     

Design of rollover prevention controller with linear matrix inequality-based trajectory sensitivity minimisation

This paper presents a method to design a rollover prevention controller for vehicle systems. The vehicle rollover can be prevented by a controller that minimises the lateral acceleration and the roll angle. Rollover prevention capability can be enhanced if the controlled vehicle system is robust to the variation of the height of the centre of gravity and the speed of the vehicle. For this purpose, a robust controller is designed with linear matrix inequality-based trajectory sensitivity minimisation. Differential braking and active suspension are adopted as actuators that generate yaw and roll moments, respectively. The newly proposed method is shown to be effective in preventing rollover by the simulation on a non-linear multibody dynamic simulation software, CarSim^®.     

Virtual test rig to improve the design and optimisation process of the vehicle steering and suspension systems

A virtual test rig is presented using a three-dimensional model of the elasto-kinematic behaviour of a vehicle. A general approach is put forward to determine the three-dimensional position of the body and the main parameters which influence the handling of the vehicle. For the design process, the variable input data are the longitudinal and lateral acceleration and the curve radius, which are defined by the user as a design goal. For the optimisation process, once the vehicle has been built, the variable input data are the travel of the four struts and the steering wheel angle, which is obtained through monitoring the vehicle. The virtual test rig has been applied to a standard vehicle and the validity of the results has been proven.     

浅析正三轮摩托车的方向把抖动

正三轮摩托车方向把抖动是由于前转向系的不规则振动造成的，前轮的振动靠前减震器的阻尼来消除，因此前减震器的刚度及阻尼的匹配是一项非常重要的研究内容。     

An Original Feedback Control with a Reversible Electromechanical Actuator Used as an Active Isolation System for a Seat Suspension. Part I: Theoretical Study

This paper provides an overview of a theoretical study of an active seat suspension. The principal objective of this study is to improve ride passenger comfort by reducing transmitted seat acceleration. The seat is represented by a non-linear two degree of freedom model. The system is linearized for small perturbations around the equilibrium. To control the dynamic of the seat suspension, an original feedback control command with a reversible electromechanical actuator is achieved. The synthesis of the regulator is realized on the linearized model of the seat suspension and the root locus method is employed. Stability and robustness characteristics have been studied. Numerical simulations in time and frequency domain show the interests of the regulator and its capability to isolate seat passenger.     

Roll- and pitch-plane-coupled hydro-pneumatic suspension. Part 2: dynamic response analyses

In the first part of this study, the potential performance benefits of fluidically coupled passive suspensions were demonstrated through analyses of suspension properties, design flexibility and feasibility. In this second part of the study, the dynamic responses of a vehicle equipped with different configurations of fluidically coupled hydro-pneumatic suspension systems are investigated for more comprehensive assessments of the coupled suspension concepts. A generalised 14 degree-of-freedom nonlinear vehicle model is developed and validated to evaluate vehicle ride and handling dynamic responses and suspension anti-roll and anti-pitch characteristics under various road excitations and steering/braking manoeuvres. The dynamic responses of the vehicle model with the coupled suspension are compared with those of the unconnected suspensions to demonstrate the performance potential of the fluidic couplings. The dynamic responses together with the suspension properties suggest that the full-vehicle-coupled hydro-pneumatic suspension could offer considerable potential in realising enhanced ride and handling performance, as well as improved anti-roll and anti-pitch properties in a very flexible and energy-saving manner.