基于综合交通枢纽的现代服务业集聚区建设的系统分析

现代服务业集聚区与综合交通枢纽共生共荣.介绍了综合交通枢纽对现代服务业集聚区发展的影响的相关理论,总结国内外依托综合交通枢纽合理规划现代服务业集聚区的一些成功经验,分析了综合枢纽的客流特点.从客流总量预测及客流组成特点,分析了基于上海虹桥综合交通枢纽的现代服务业集聚区建设.     

铁路货车制动梁对车轮磨耗影响的调查分析

铁路货车提速后车轮磨耗加剧,把握磨耗规律,采取有效减磨措施是亟待解决的课题.通过对铁路货车中拉杆式制动梁在缓解状态的理论受力分析及制动状态横移的调研统计,发现制动时固定杠杆与游动杠杆侧制动梁反向横移,1、4、6、7位轮瓦磨耗位置贴近轮缘;通过车轮磨耗调研发现,车轮踏面先于轮缘磨耗,且支点侧的2、4、6、8位车轮磨耗量偏...     

风帆助航对船舶主机油耗率的影响

加装风帆是船舶节能的有效途径,但风帆助航会影响船舶主机和其他系统的运行状况,对船舶能效的影响主要来自主机工况的改变。本文通过分析加装风帆后对螺旋桨工作特性的影响,推导出了计算主机油耗率的方法,并使用某超大型油轮(VLCC)的相关参数进行验证计算,证明此方法简单实用,可为计算风帆助航船舶能效指数EEOI等相关参数提供参考。     

浅析城市道路设计中路线方案的比选——以兰州市南环路(西客站段)联通工程方案为例

城市道路建设过程中,存在各种不确定因素。当道路沿线构筑物较多、周边环境较为复杂时,需进行多方案的比选,在兼顾经济指标与技术指标的前提下确定切实可行的路线方案。结合兰州市南环路(西客站段)联通工程方案,总结了城市建设中路线方案比选的几点思考,供道路专业人员参考。     

基于岩体指标和掘进参数的TBM净掘进速率预测模型

净掘进速率是TBM施工速度的主要评价指标,与围岩物理力学性质、TBM掘进参数之间存在一定相关性。文章以兰州水源地建设工程输水隧洞双护盾TBM施工为背景,基于现场实测数据,选择岩石单轴抗压强度、抗拉强度、变形模量、泊松比、岩石耐磨性CAI值等岩体指标,以及刀盘推力和刀盘转速等掘进参数,进行TBM净掘进速率与有关影响参数之间的单因素相关性分析,得到相应拟合公式;基于TBM净掘进速率与岩体指标、掘进参数之间的相关性,利用多元非线性回归方法建立了TBM净掘进速率预测模型。通过将兰州水源地建设工程输水隧洞实测TBM净掘进速率和预测结果进行对比,验证了TBM净掘进速率预测模型的合理性。研究结果表明:(1)在复杂的多种地质条件下,TBM净掘进速率与岩石单轴抗压强度、抗拉强度、变形模量、岩石耐磨性CAI值、刀盘推力以及刀盘转速呈负相关关系,与泊松比呈正相关关系;(2)干湿状态对岩石耐磨性CAI值有一定影响,饱和状态下岩石耐磨性CAI值与TBM净掘进速率之间的相关性更显著;(3)建立的多元非线性回归预测模型,预测精度较高,可为相似地质条件下TBM净掘进速率估算提供参考。     

Using GPS-data to determine optimum electric vehicle ranges: A Michigan case study

Fuel-switching personal transportation from gasoline to electricity offers many advantages, including lower noise, zero local air pollution, and petroleum-independence. But alleviations of greenhouse gas (GHG) emissions are more nuanced, due to many factors, including the car’s battery range. We use GPS-based trip data to determine use type-specific, GHG-optimized ranges. The dataset comprises 412 cars and 384,869 individual trips in Ann Arbor, Michigan, USA. We use previously developed algorithms to determine driver types, such as using the car to commute or not. Calibrating an existing life cycle GHG model to a forecast, low-carbon grid for Ann Arbor, we find that the optimum range varies not only with the drive train architecture (plugin-hybrid versus battery-only) and charging technology (fast versus slow) but also with the driver type. Across the 108 scenarios we investigated, the range that yields lowest GHG varies from 65 km (55+ year old drivers, ultrafast charging, plugin-hybrid) to 158 km (16–34 year old drivers, overnight charging, battery-only). The optimum GHG reduction that electric cars offer – here conservatively measured versus gasoline-only hybrid cars – is fairly stable, between 29% (16–34 year old drivers, overnight charging, battery-only) and 46% (commuters, ultrafast charging, plugin-hybrid). The electrification of total distances is between 66% and 86%. However, if cars do not have the optimum range, these metrics drop substantially. We conclude that matching the range to drivers’ typical trip distances, charging technology, and drivetrain is a crucial pre-requisite for electric vehicles to achieve their highest potential to reduce GHG emissions in personal transportation.     

某48 m+80 m+48 m混凝土梁桥施工监控方法研究

结合工程实例,介绍了混凝土梁桥施工监控方法,并得出监控结论,有关经验可供相关专业人员参考。     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

舰船复合材料结构物应用工程技术特点及内涵分析

针对舰船平台技术所面临的发展需求与挑战,从总体平台特性、综合隐身以及综合保障技术发展需求的角度,简要分析开展舰船复合材料结构物应用工程的必要性和紧迫性.以西方国家潜艇应用为例,梳理国外舰船复合材料结构物应用发展思路,提出并阐明舰船功能复合材料结构物应用工程的3个"一体化"技术特点,着重探讨总体/结构设计技术的定义、内涵...     

摆盘发动机空间机构的震动力完全平衡研究

特种摆盘发动机在航空航天、武器系统等方面有着广泛的应用。从空间机构学理论出发,抽象出机构模型,利用空间机构的通路定理,分析摆盘发动机机构震动力完全平衡的可行性,并推导出该空间机构必须满足的平衡条件;结合发动机自身结构特点,研究震动力完全平衡时各构件的结构条件与配重条件;同时针对所给条件的不足之处提出进一步的分析研究方法,为发动机在结构设计与减振方面提供理论基础。