变截面钢板弹簧梯形叶片的斜面位置分析

梯形变截面钢板弹簧具有轧制的线形简单、对设备要求不高等优点。将梯形截面与抛物线截面进行对比分析，以梯形叶片的斜面与抛物线相切为基础，以切点在材料利用最充分处、端部、根部为重点，分析了梯形叶片在不同位置时的端部厚度、斜面的水平长度、梯形叶片与抛物线叶片的质量比，其结果对梯形叶片的设计具有一定的参考价值。     

一种确定高圆簧横向刚度的有效方法

文中将高圆簧简化为等截面弹性直杆，导出高圆簧横向刚度计算式，并用试验结果进行修正，提出高圆横向刚度分析方法。理论分析和试验结果表明：高圆簧横向刚度的大小取愉于高圆簧的自由高度和工作高度，即由其结构几何参数和工作载荷决定。按文中方法确定的高圆簧横向刚度理论值与试验结果间的最大误差不超过１０％，满足工程理论分析要求。     

A multi-spring model for monopile analysis in soft clays

The offshore wind industry in China has seen a rapid development in recent years and is projected to account for half of global yearly installed capacity in the years to come. Monopiles are a popular foundation solution for supporting offshore wind turbines. However, due to challenging seabed soil conditions, which often feature thick normally consolidated soft clays and harsh environmental loading (i.e. frequent occurrence of typhoons), extremely long monopiles are often designed. The large monopiles are costly to fabricate and install and sometimes kills the viability of the concept in cases where the bedrock is relatively shallow and expensive piling in rock is otherwise required. However, the state-of-practice for designing these monopiles in clays is typically by using the API p-y springs, which are widely known to underestimate soil-pile interaction stiffness and capacity for large diameter monopiles. Improvement to the design method can therefore have significant economic implications to the industry. The paper presents an effort toward this direction. A multi-spring beam-column model suitable for monopile design in soil conditions in China is proposed. The model features three soil spring components, namely the lateral p-y spring, the pile tip base shear s-y spring and rotational m-θ springs along the pile shaft. The validity of the model is verified by a comprehensive suite finite element parametric analyses. Guidance for incorporating the cyclic loading effect into design is also provided. The model proposed in this paper has large potentials for application in design practice.     

南昌红谷沉管隧道短管节干坞内拉合对接施工技术

沉管隧道最终接头短管节在牵移和拉合过程中易发生偏移与倾斜,且GINA止水带压缩到设计值难度较大。以南昌红谷沉管隧道为例,从准备、牵移、拉合及后处理4个阶段介绍短管节对接拉合施工工艺。通过对底钢板打磨、涂抹黄油等,减小底部摩擦阻力。采用计算机控制液压同步提升系统、液压数据量测、钢端壳间距测量等措施,对短管节轴线及平面控制。实践表明:GINA止水带压缩量误差仅为+4 mm,短管节轴线及平面偏差均在可控范围内,短管节干坞内拉合对接操作可行、质量可靠。     

A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

Identity-based broadcast encryption with shorter transmissions

This paper describes two identity-based broadcast encryption(IBBE) schemes for mobile ad hoc networks.The first scheme proposed achieves sub-linear size cipertexts and the second scheme achieves O(1)-size ciphertexts.Furthermore, when the public keys are transmitted, the two schemes have short transmissions and achieve O(1) user storage cost, which are important for a mobile ad hoc network.Finally, the proposed schemes are provable security under the decision generalized bilinear Di?-Hellman(GBDH) assumption in the random oracles model.     

内蒙古达斡尔族群体9个X-STR位点的遗传多态性及法医学应用价值评估

目的研究内蒙古达斡尔族群体9个X-STR位点(DXS6789、DXS101、DXS8378、DXS7132、DXS7133、DXS7423、DXS6804、DXS6799、HPRTB)的多态性分布及法医学应用价值。方法抽取内蒙古达斡尔族87名健康无关个体静脉血,提取DNA,经PCR扩增、变性聚丙烯酰胺凝胶电泳及银染显色技术进行等位基因分型;采用SPSS13.0软件计算各位点基因型频率和等位基因频率,并检验等位基因分布差异有无统计学意义;Genepop软件进行Hardy-Weinberg平衡检验;Fstat软件计算基因多态性、固定指数并检验固定指数偏离平衡的程度;Powerstats软件计算各种法医学应用指标。结果获得内蒙古达斡尔族群体9个X-STR位点等位基因频率分布的数据;进一步检验获得9个X-STR位点中DXS7133位点的多态性和分化程度较低;DXS7423和DXS7132位点在不同民族中基因分布差异无统计学意义。结论9个X-STR位点中,DXS6789、DXS101、DXS8378、DXS7132、DXS7423、DXS6804、DXS6799、HPRTB 8个位点有较高的遗传多态性和个体识别率,在个体识别和女孩的亲权鉴定中有较高应用价值,对疾病相关研究有实际意义。     

超短脉冲发生器

介绍一种超短脉冲发生器,它可以重复产生宽度极窄的高电压脉冲,而功耗却很低。这种电路可应用于超高分辨率雷达、扩频通信以及许多其它需要宽带辐射的场合,因而具有较高的实用价值。     

Instantaneous communication throughputs of vehicular ad hoc networks

Vehicular ad hoc networks (VANETs) formed by connected vehicles in a traffic stream could be applied to improve safety, mobility, and environmental impacts of a transportation system. In this paper, we present analytical models for the instantaneous communication throughputs of VANETs to measure the efficiency of information propagation under various traffic conditions at a time instant. In particular, we define broadcast and unicast communication throughputs by the wireless channel bandwith multiplied by the average probabilities that one vehicle is a successful receiver and sender in a VAENT, respectively. With a protocol communication model, we derive formulas to determine the probabilities for an equipped vehicle to be a successful broadcast receiver and a successful unicast receiver/sender, and obtain broadcast and unicast throughputs along discrete and continuous traffic streams. We further examine the impacts on communication throughputs of the transmission range and the interference range of dedicated short range communication devices as well as the market penetration rate of equipped vehicles and the percentage of senders. Finally, we investigate the influence of shock waves on communication throughputs.     

铁路矮塔斜拉T构桥结构设计方法实例研究

本文以渝(重庆)黔(黔江)铁路长途河大桥为工程背景,综合考虑桥址地形地质、桥梁跨度、净空及受力特点等要素,提出了主桥采用(132+132)m的矮塔斜拉T构桥型的总体设计方案,并采用数值模拟方法分析了拉索布置范围、索间距对梁部内力、刚度的影响规律.结果表明:(1)斜拉索靠近主塔布置、适当加密索间距有利于减小梁部负弯矩峰值...