Investigating the influence of soil properties on railway traffic vibration using a numerical model

This paper presents the influence of dynamic and geometrical soil parameters on the propagation of ground vibrations induced by external loads. The proposed approach is based on a three-dimensional model, focusing on realistic excitation sources like impulse loads and moving railway vehicles. For the latter, a complete vehicle/track model is developed. The simulation is performed in time domain, offering an interesting approach, compared with classic cyclic analyses. The ground is modelled initially as an elastic homogeneous half-space and additionally as a layered half-space. First, the effect of homogeneous soil properties on ground vibration is analysed. Soil stratification is then taken into account, using various configurations. Analysis reveals that as receiver distance increases ground wave reflection in a layered ground plays an important role in the reduction of ground surface motion. This effect is magnified when the phase velocity wavelength becomes large compared with the depth of the surface layer.     

Design of Nonlinear Controllers for Active Vehicle Suspensions Using Parameter-Varying Control Synthesis

Nonlinear suspension controllers have the potential to achieve superior performance compared to their linear counterparts. A nonlinear controller can focus on maximizing passenger comfort when the suspension deflection is small compared to its structural limit. As the deflection limit is approached, the controller can shift focus to prevent the suspension deflection from exceeding this limit. This results in superior ride quality over the range of road surfaces, as well as reduced wear of suspension components. This paper presents a novel approach to the design of such nonlinear controllers, based on linear parameter-varying control techniques. Parameter-dependent weighting functions are used to design active suspensions that stiffen as the suspension limits are reached. The controllers use only suspension deflection as a feedback signal. The proposed framework easily extends to the more general case where all the three main performance metrics, i.e., passenger comfort, suspension travel and road holding are considered, and to the design of road adaptive suspensions.     

乘用车后碰撞安全模拟与结构设计研究

针对我国乘用车后碰撞燃油系统安全要求的强制性标准,研究了乘用车后碰撞安全的一般设计方法。通过某车型三厢改两厢的改型开发案例,利用有限元分析方法,分析验证了改型车的燃油系统安全性。从中总结了乘用车后碰撞安全结构设计的一些原则与要点。     

地铁车辆基地出入线一度停车再起动的平纵断面关系模型

从《地铁设计规范》相关条文规定出发,探讨车辆基地出入线列车一度停车再起动的平纵断面关系;分析列车在停车时、停车后和起动时等三种不同工况的受力情况。根据牵引计算原理,建立其平纵断面关系模型。以长沙市轨道交通2号线西延二期工程为例,计算出入线的最大坡度与最小曲线半径。     

考虑前后多车的网联自动驾驶车辆混流跟驰模型

随着中国新基建战略的提出及自动驾驶和网联通信技术的不断发展，网联自动驾驶车辆（CAV）、自动驾驶车辆（AV）和常规人驾车辆混行的交通流将在未来长时间存在。建立适用于网联自动驾驶车辆、自动驾驶车辆和常规人驾车辆3种类型车辆的混流跟驰模型，考虑多前后车车头间距、多前车速度差、加速度差、与主体车辆的相对距离等因素，并进行典型场景的数值仿真。刹车和起步过程的3种混流数值仿真结果显示，模型在几种典型混行场景下均具有可行性，车辆的加速度和速度变化更为平缓。不同CAV比例下的数值仿真结果显示，车队中CAV比例越高，车队整体恢复至平稳状态的时间越短，波动幅度越小。CAV均质流数值仿真结果表明，与MHVAD模型相比，该模型不稳定区域减小33.8%，所控制的车队速度波动幅度减小14%。CAV与AV混流的数值仿真结果显示，与PATH实验室模型相比，由该模型控制的车队加速度进入相对稳定状态提前5.5 s。该模型可用于不同车辆均质流及3种车辆混行的队列控制，在目前开展混行实车试验困难的情况下，也可应用该模型进行混行跟驰仿真，从而为混行交通流的道路交通管理及基础设施布设提供理论依据和模型支持。     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

国内专用汽车发展现状浅析

文章阐述了我国专用汽车的发展概况,从专用汽车技术发展现状出发,分析了我国专用汽车发展中存在的问题以及发展趋势,并提出了相关建议.     

浅谈公交车辆前桥工字梁承孔维修工艺

本文介绍了车辆前桥工字梁承孔在行驶当中踩刹车时突然断裂的机械事故的原因，阐述了公交车辆前桥工字梁承孔的重要性，论证了对公交车辆前桥工字梁承孔维修的必要性和重要性，得出了相关的方法和建议。     

汽车营销专业"工作室制"人才培养模式探究

文章以汽车营销专业为例,从汽车小微企业和高职院校人才培养困局入手,综合考虑学校、企业、政府和学生各方利益,提出较为合适的就业工作室组合订单人才培养模式,并对该人才培养模式的内容和具体实施进行了阐述。     

车身壁板自由阻尼层稳健性优化设计

在车身壁板自由阻尼层的优化设计中,提出了考虑阻尼材料参数不确定性波动的稳健性优化设计方法。首先,在车身防火墙、地板和顶棚等区域全敷阻尼材料;其次,以等效辐射声功率(ERP)为优化目标对阻尼层布局进行拓扑优化并验证优化效果;最后,以阻尼层厚度为随机设计变量,损耗因子和弹性模量为随机变量,质量最小为优化目标,并结合径向基函数(RBF)近似模型、蒙特卡洛模拟(MCS)和序列二次规划算法(SQP)对阻尼层进行6σ稳健性优化设计。结果表明,优化后车身自由阻尼层的总质量减少了50.45%,并且车身结构噪声性能达到了6σ质量水平,实现了保证车身轻量化要求下的阻尼层稳健性优化的目标。