一系纵向定位间隙对磁流变耦合轮对车辆横向动力学性能的影响

为了合理控制车辆轮对定位间隙,提高磁流变耦合轮对车辆在高速时的横向动力学性能,建立该车辆的空间动力学模型,分析了轮对纵向定位间隙对车辆临界速度和曲线通过性能的影响。得出了纵向定位间隙的增大能使磁流变耦合轮对车辆的临界速度急剧下降,轮对横移量和冲角、轮轨横向力和车体横移加速度快速增大;只有在小间隙的条件下,车辆在高速铁路上才具有较高的临界速度和较好的曲线通过性能。     

�ɱ���ʻʱ��Ķ�̬����·�������

针对城市建设发展中道路交通阻塞问题，研究了两种类型的车辆路径与调度问题，给出了相应的求解框架，并构建了一个具有可变行驶时间的动态车辆路径与调度模型，涉及了车辆的固定费用、运营成本和早到或者延期的惩罚费用等多种费用。该问题是一个NP-hard问题，采用遗传算法确定最优解，并给出了车辆路径与调度方案的表示方式。最后设计了一个交通网络，通过动态交通仿真更新行驶时间，研究了多个不同时间段道路阻塞情况下算法的性能。结果显示比不考虑实时行驶时间信息的模型，该模型能够得到更低的总成本。     

�綯�������м����ͳ�Ʒ���ϵͳ�����

电动汽车运行监控与统计分析系统主要由电动汽车信息采集与传输终端、运行监控系统以及运行统计分析系统构成.对信息采集与传输终端系统,主要讨论了系统的硬件组成结构和主要功能;在监控系统设计中,讨论了系统的功能,重点给出地理信息系统管理模块的实现方法;对统计分析系统,主要讨论了系统的组成、功能及设计方法.本系统现已经过长时间的试运行,实验结果表明:系统总体设计合理、功能齐全,工作性能稳定可靠.     

智能交通系统的发展及其共用信息平台的建设

介绍了智能交通系统的7个主要子系统的功能实现和发展方向，以及共用信息平台的建立，它承载ITS的规划、管理控制和业务发展等功能，科学合理地指导ITS及其子系统的建设，最终形成交通信息化、智能化，有效地改造和提升交通运输传统产业。     

机车—桁架桥梁耦合振动研究

建立了轮对和钢轨之间弹性联接３３个自由度的机车车辆动力学模型，采用有限元法分析计算了列车荷载作用下某铁路双线钢桁桥的动力响应。采用空间梁单元建立了桁架桥的振动方程。根据随机振动理论计算了当列车过桥时，车－桥耦合振动系统的空间动力响应，并与实测结果进行了比较，比较表明，采用弹性联接横型比密贴模型的计算结果更接近于实测值。     

Establishing and Managing Jurisdiction-wide Traffic Monitoring Systems: North American Experiences

With the rapid motorization process in China, an increasingly complicated highway transportation system has been developed. Reliable national and provincial traffic monitoring systems are becoming necessary. A review of experiences from developed countries in North America can be helpful for highway administrations and agencies to design and implement effective and efficient traffic monitoring systems. Highway agencies in North America have over time developed “standard” traffic monitoring systems based on guidelines from the Federal Highway Administration (FHWA), the American Association of State Highway and Transportation Officials (AASHTO), and the American Society for Testing and Materials (ASTM). The common practices are adopted based on the analysis of system accuracy, reliability, and cost-effectiveness. The common practices can produce equivalent and comparable traffic summary statistics, which are able to support sensible decision-makings of all aspects of highway transportation. The experiences of highway agencies, current practices, and related guidelines in North America are therefore presented at first. The principles for guiding development and operation of traffic data programs are then summarized and reviewed. The existing problems and active research for traffic monitoring practices and standards are also identified and discussed. It is believed that the reviewed experiences, guidelines, and principles will be helpful for China to establish effective and common-practice based “standard” traffic monitoring systems.     

一种基于车辆跟踪的微观交通参数采集方法

微观交通参数采集是智能交通中的重要技术。本文用基于车辆跟踪的方法提取微观交通参数，首先，利用动态图像处理技术进行车辆跟踪；然后，建立适于交通参数采集的摄像机模型：在此基础上，提出了基于车辆跟踪的车辆位置检测算法，瞬时速度估计算法，并阐述了其它交通参数采集方法，试验表明，这些方法可以有效的提取交通参数，实施方便。     

正面碰撞用HIII 50百分位男性假人颈部标定系统的研究

介绍了汽车正面碰撞过程中所用到的HybridIII50％男性假人及其标定原理,着重介绍其颈部标定试验设备、试验步骤、试验结果及分析,并给出相应问题的解决方案,最终阐明颈部标定的必要性。     

Study of Probe Sample Size Model in Probe Vehicle Technology

In this paper, market penetration of a probe vehicle for real-time traffic data collection is discussed. A new comprehensive probe sample size model that satisfies the need of traffic flow parameter estimation and traffic network coverage is established, in which many factors like location error, probe ‘report’ transmission interval, probe data analysis interval, traffic flow density, link length, and road type are included. Based on this model, this paper proves the relationship between market penetration of the probe vehicle and other indexes, when probe data is used for link average speed estimation based on VISSIM simulation. The simulation result shows that the sample size model can provide effective probe information to accomplish the estimation of link speed.     

连续箱梁跨中合龙段箱梁顶板纵向裂缝分析研究

针对某桥预应力混凝土连续箱梁中跨合龙段顶板出现的纵向裂缝,根据现场检查资料并采用空间有限元分析方法进行了研究。研究结果表明,产生混凝土顶板纵向裂缝的主要原因是设计上对箱梁温度梯度和车辆轮载作用考虑不足,导致箱梁顶板产生的混凝土横向正应力超过其抗拉标准强所致。