A cost-based maritime container assignment model

A recently proposed frequency-based maritime container assignment model (Bell et al., 2011) seeks an assignment of full and empty containers to paths that minimises expected container travel time, whereas containers are in practice more likely to be assigned to minimise expected cost. A cost-based container assignment model is proposed here. It is assumed that routes and service frequencies are given so ship operating costs are also fixed. The objective is to assign containers to routes to minimise container handling costs, container rental and inventory costs. The constraints in the model are extended to include route as well as port capacities. It is shown that the problem remains a linear program. A numerical example is presented to illustrate the properties of the model. The paper concludes by considering the many applications of the proposed maritime container assignment model.     

Design safety margin of a 10,000 TEU container ship through ultimate hull girder load combination analysis

Assessment of the ultimate longitudinal strength of hull girders under combined waveloads can be of particular importance especially for ships with large deck openings and low torsional rigidity. In such cases the horizontal and torsional moments may approach or exceed the vertical bending moment when a vessel progresses in oblique seas. This paper presents a direct calculation methodology for the evaluation of the ultimate strength of a 10,000 TEU container ship by considering the combined effects of structural non-linearities and steady state wave induced dynamic loads on a mid ship section cargo hold. The strength is evaluated deterministically using non-linear nite element analysis. The design extreme values of principal global wave-induced load components and their combinations in irregular seaways are predicted using a cross-spectral method together with short-term and long-term statistical formulations. Consequently, the margin of safety between the ultimate capacity and the maximum expected moment is established.     

A set-covering model for a bidirectional multi-shift full truckload vehicle routing problem

This paper introduces a bidirectional multi-shift full truckload transportation problem with operation dependent service times. The problem is different from the previous container transport problems and the existing approaches for container transport problems and vehicle routing pickup and delivery are either not suitable or inefficient. In this paper, a set covering model is developed for the problem based on a novel route representation and a container-flow mapping. It was demonstrated that the model can be applied to solve real-life, medium sized instances of the container transport problem at a large international port. A lower bound of the problem is also obtained by relaxing the time window constraints to the nearest shifts and transforming the problem into a service network design problem. Implications and managerial insights of the results by the lower bound results are also provided.     

集装箱封具的应用已经成为反恐的一个重要手段

本文从"障碍性"和"象征性"的功能方面对机械式封具和电子式封具的应用进行了分析,就ISO/TC104和SAC/TC6所拟定相关标准的核心内容予以论述。还就集装箱领域的RFID和GPS技术的推广进行了预测。     

船舶大型化对航运和港口的影响

目前订造中的7 500 TEU以上的船舶有100多艘。其中许多船舶将于2007年下水,投入亚洲-欧洲和跨太平洋贸易航线的营运。“超级集装箱船”(VLCS)正在坚定地从概念走向现实。超过8 000TEU的船舶的投入使用,对班轮公司、航运贸易和集装箱码头提出了新的挑战。班轮公司应该通过削减一组环线中的船舶数目、改变挂靠港和重新组织航运网络的规划途径来应对挑战。先进枢纽港应该通过开发新概念的港口装卸系统和新概念码头来应对挑战。超大型集装箱船舶挂靠的港口不能仅仅是简单的枢纽港,同时必须成为物流平台。     

RANS simulation of a container ship using a single-phase level-set method with overset grids and the prognosis for extension to a self-propulsion simulator

Steady flow simulations for the Korean Research Institute for Ships and Ocean Engineering (KRISO) container ship (KCS) were performed for towing and self-propulsion. The main focus in the present article is on the evaluation of computational fluid dynamics (CFD) as a tool for hull form design along with application of state-of-the-art technology in the flow simulations. Two Reynolds-averaged Navier-Stokes (RANS) equation solvers were employed, namely CFDShip-Iowa version 4 and Flowpack version 2004e, for the towing and self-propulsion cases, respectively. The new features of CFDShip-Iowa version 4 include a single-phase level-set method to model the free surface and an overset gridding capability to increase resolution in the flow and wave fields. The new features of Flowpack version 2004e are related to a self-propulsion scheme in which the RANS solver is coupled with a propeller performance program based on the infinitely bladed propeller theory. The present work is based on a close interaction between IIHR-Hydroscience and Engineering of the University of Iowa and Osaka Prefecture University. In the following article, overviews are given of the present numerical methods and results are presented and discussed for the KCS in towing and self-propulsion modes, including comparison with available experimental fluid dynamics (EFD) data. Additional evaluation is provided through discussion of the recent CFD Workshop Tokyo 2005, where both methods appeared to yield very promising results.     

全球-15米以下的深水港口及其集装箱运输

一个港口，要发展集装箱运输，必须有深水航道、深水泊位，尤其是规划成为集装箱运输的枢纽港，更需要深水航道、深水泊位。目前，全球-15米以下的深水港共有19个，介绍其中10个，与此同时介绍该10个港口的集装箱运输的现状及发展态势。     

国际集装箱运输市场特点及我国的对策

本文从论述集装箱运输现状及国际集装箱运输市场的特点出发，阐述了我国集装箱运输的对策问题。     

Efficient planning of berth allocation for container terminals in Asia

Berth allocation is essential for efficient terminal utilization in container ports, especially those in Asia. This paper is concerned with a berth allocation problem(BAP) that minimizes the sum of port staying times of ships and that minimizes dissatisfaction of the ships in terms of the berthing order. In general there exist tradeoffs between these objectives. An algorithm is presented to identify noninferior solutions to the BAP. The algorithm is demonstrated with some sample problems and the results indicate the importance of the problem in efficient terminal utilization.     

集装箱港口建设费征收的问题及建议

集装箱港口是对外贸易物流供应链的核心节点,国家对集装箱港口基础设施建设给予资金支持。通过征收集装箱港口建设费,进一步加快集装箱港口基础设施建设的步伐,减少贸易的物流瓶颈,降低货主物流成本,缩短交货时间。探讨了集装箱港口建设费征收存在的问题,并提出相应的建议。