格拉斯磁环匀强磁场分析

以毕奥-萨伐尔定律为基础,建立亥姆霍兹线圈以及格拉斯磁环中心磁场分布模型,并计算了它们内部的轴向磁感应强度分布,绘出了空间分布图,分析了轴向磁感应强度与x、y坐标的关系,分析结果得到了亥姆霍兹线圈和格拉斯磁环内部匀强磁场分布区域,通过比较得到格拉斯磁环内部的匀强磁场区域比亥姆霍兹线圈内部的匀强磁场分布区域更大的结论。     

Locating emergency vehicles with an approximate queuing model and a meta-heuristic solution approach

In this paper, the location of emergency service (ES) vehicles is studied on fully connected networks. Queuing theory is utilized to obtain the performance metrics of the system. An approximate queuing model the (AQM) is proposed. For the AQM, different service rate formulations are constructed. These formulations are tested with a simulation study for different approximation levels. A mathematical model is proposed to minimize the mean response time of ES systems based on AQM. In the model, multiple vehicles are allowed at a single location. The objective function of the model has no closed form expression. A genetic algorithm is constructed to solve the model. With the help of the genetic algorithm, the effect of assigning multiple vehicles on the mean response time is reported.     

放宽条件定点集结模式下编组站车辆 集结排队系统分析

集结模式决定了货车集结过程的结束条件，定点集结是一种高效率的集结方式，有利于提高运输质量.针对放宽条件定点集结模式下编组站车辆集结过程，建立离散时间批到达批服务排队模型，利用嵌入式马尔可夫链方法求得离去时刻瞬时系统集结车辆队长分布，并求得任意时刻车辆集结队长分布，在此基础上分别分析了最小编成辆数，车组大小分布，车流到达强度，服务时间间隔分布对车辆平均集结队长，集结延误时间，效率，一昼夜发送车流量等系统指标的影响.分析结果表明，各因素对车辆集结排队系统影响明显.因此，利用本文提出的模型能为编组站的精细化管理和车流组织优化提供决策参考.     

论孔子人才观的历史定位与普适价值

孔子的人才观虽然产生于春秋时期动荡的社会背景下,却揭示了人才的最本质内涵———＂仁、智、勇＂。三者作为人才内涵的核心三要素,形成一个内在的三角稳定结构,它能够持久地推动包括成才在内的人的生命境界的发展,因而具有超越时代和社会阶层的普适价值。     

Compliance with MARPOL Annex VI regulation 14 by ships in the Gulf of Guinea sub-region: Issues,challenges and opportunities

The negative environmental and health impacts association with high sulphur dioxide emissions from shipboard machineries have been raised by various stakeholders within the marine transportation sector. It is against this backdrop that the International Maritime Organisation under the MARPOL Annex VI regulation 14 has capped sulphur emission to 0.1% for Sulphur Emission Control Areas and 0.5% for the other shipping nations. However, ship owners in the Gulf of Guinea (GoG) sub-region are facing multitudes of challenges in meeting up with this new IMO regulation. This paper aims to identify the main barriers hampering effective compliance to this new regulation by ships operating in the GoG, rank the barriers, and then discuss the possible opportunities that may arise as a result of addressing the challenges. To identify the main barriers, experts with several years of experience in the maritime industry from Ghana and Cameroun were used while multi-criteria decision-making (MCDM) method combining analytic hierarchy process (AHP) and technique for order preference by similarity to ideal solution (TOPSIS) was employed to rank the barriers. Other methods such as fuzzy AHP (FAHP), rank-order centroid (ROC) and TOPSIS were combined to validate the result of the study. The findings indicate that lack of infrastructure, lack of comprehensive marine air pollution laws and high capital and operational costs of sulphur reduction solutions emerged as the top three ranked barriers. The findings of this study can be useful to ship owners and policy makers in dealing with the issues of marine air pollution.     

Adoption of alternative fuel vehicles: Influence from neighbors,family and coworkers

During the last years, many governments have set targets for increasing the share of biofuels in the transportation sector. Understanding consumer behavior is essential in designing policies that efficiently increase the uptake of cleaner technologies. In this paper we analyze adopters and non-adopters of alternative fuel vehicles (AFVs). We use diffusion of innovation theory and the established notion that the social system and interpersonal influence play important roles in adoption. Based on a nationwide database of car owners we analyze interpersonal influence on adoption from three social domains: neighbors, family and coworkers. The results point primarily at a neighbor effect in that AFV adoption is more likely if neighbors also have adopted. The results also point at significant effects of interpersonal influence from coworkers and family members but these effects weaken or disappear when income, education level, marriage, age, gender and green party votes are controlled for. The results extend the diffusion of innovation and AFV literature with empirical support for interpersonal influence based on objective data where response bias is not a factor. Implications for further research, environmental and transport policy, and practitioners are discussed.     

朔黄铁路POC语音调度系统服务质量测试方法研究

POC语音调度系统在朔黄铁路运营生产中发挥了重要作用,本文为朔黄POC语音调度系统设计了一种语音服务质量评价指标体系,并详细描述了各指标的计算公式和测试方法,为朔黄铁路LTE系统服务质量检测评价提供指导和支撑。     

基于虚拟化云技术的路局中心地震预警监测系统方案及联动研究

通过研究铁路地震预警监测系统现状和建设趋势,从资源共享、重复性建设、地震联动触发信号系统停车、牵引供电系统断电等多角度分析存在的问题,结合实际需求,提出铁路局中心系统采用虚拟化云技术的建设思路,并提出地震预警监测系统通过路局中心系统与信号RBC、牵引供电中心接口的联动触发策略。文中论述了采用虚拟化云技术搭建的地震预警监测铁路局中心系统功能、系统构成、硬件配置,从而解决各条铁路接入路局中心增加大量服务器等所带来的资源浪费严重、重复性建设等问题,为建设项目节省投资;阐述了通过路局中心系统与信号RBC、牵引供电中心接口的联动触发方案,为安全提供保障的同时尽可能节省建设投资和维护成本,更好地为铁路安全保驾护航。     

散粮输送工艺设备分析

通过对散粮输送行业中常见的工艺设备进行探究,分析设备运行过程中可能存在的问题,提出合理的解决方案,为散粮系统工艺设计及工程运行提供重要参考意义。     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.