柴油机船舶推进装置的建模和实时仿真

本文根据准稳态的概念建立了适用于实时仿真的二冲程柴油机船舶推进装置的多阶一性模型。在充分多的试验数据的基础上，结合工作原理建立了各子系统及整个装置的动态模型，这种模型既能反映柴油机内部各参数，精度较高，计算工作量也比较适中。文中提出了一些经验公式，使模拟得以有效地简化。最后，作为实例给出了３５０００吨油船推进装置的实时仿直     

弹性接触问题的位移-力法有限元解法研究

本文根据接触状态下的有限元基本方程,通过对定解条件、约束条件的分析应用,得出了仅与接触点有关的定解方程。 运用所编制的电算程序对某柴油机副连杆销及孔在最大载荷下的失圆变形进行了计算。通过采用空心及实心销两种简化模型计算得出了实际副连杆销的失圆变形范围。     

A pseudofield model approach to simulate compartment-fire phenomena for marine fire safety design

In order to prevent the spread of marine compartment fires, it is necessary to understand the governing factors or characteristics of fire-spread phenomena. We present a pseudofield model approach to this problem. We first described a field model of turbulent heat convection based on a standard k – turbulence model. Two-dimensional numerical simulations of a two-linked compartment fire were carried out in order to predict the turbulent convection flow induced by the heat released from the fire. Then a more complicated fire-spread problem of multilinked compartment fires was analyzed by means of a zone model, in which the amounts of oxygen consumption and gas generation were solved by a gas-balance equations system. The effect of threshold conditions on fire propagation and the effect of the thickness of the heat insulation were investigated with numerical simulations.     

利用“有效风能”预报航道淤积

提出了"有效风能"概念;导出了"有效风能"与浪、沙、航道淤积之间的相关关系;得出了利用"有效风能"计算航道淤积的计算公式,并与黄骅港海区现场资料进行了验证和校核,效果良好。     

公路工程不同报价评标办法结果的经济合理性分析

根据交通部颁布的“公路工程施工招标投标办法”及有关文件,采用3种不同标底对某项工程的投标报价进行评定,并对评定结果进行分析,研究探讨最适合市场经济特点的科学评标办法。     

让压预应力锚索在软岩隧道大变形控制中的作用机制研究

为解决高地压、高流变条件下软岩隧道围岩及支护结构大变形控制难题，通过理论和数值分析，研究让压预应力锚索在隧道大变形控制中的作用机制。研究内容包括2个方面，一是研究新型让压锚垫板在低预紧力及低围压下的力学性能，满足支护结构先柔让压的要求； 二是让压结束后，预应力锚索在高预紧力条件下改善支护结构受力性能，实现后刚强支的作用。结果表明： 1）预应力锚索通过施加预紧力，增大洞壁径向阻力，提高围岩稳定性； 2）预应力锚索在让压结束后对支护结构的主要作用是减跨，由此提高支护结构刚度和承载能力； 3）围岩、支护结构和让压预应力锚索变形协调，力学上相互耦合，构成“先柔后刚”的支护体系。     

大型充泥袋结构在黄骅港一期工程引堤工程中的应用

重点介绍黄骅港引堤工程采用大型充泥袋结构方案的研究应用情况,并对设计、施工中的某些技术问题进行探讨并提出建议。     

深基坑土钉墙支护现场测试及优化设计

以成都市锦贸大厦深基坑土钉支护为实例,对土钉应变测试,地表土体变形破裂观测,位移监测三项成果进行分析,对土钉支护作用机制作了初步探讨,并提出了土钉墙的优化设计。     

Optimization models for differentiating quality of service levels in probabilistic network capacity design problems

This paper develops various chance-constrained models for optimizing the probabilistic network design problem (PNDP), where we differentiate the quality of service (QoS) and measure the related network performance under uncertain demand. The upper level problem of PNDP designs continuous/discrete link capacities shared by multi-commodity flows, and the lower level problem differentiates the corresponding QoS for demand satisfaction, to prioritize customers and/or commodities. We consider PNDP variants that have either fixed flows (formulated at the upper level) or recourse flows (at the lower level) according to different applications. We transform each probabilistic model into a mixed-integer program, and derive polynomial-time algorithms for special cases with single-row chance constraints. The paper formulates benchmark stochastic programming models by either enforcing to meet all demand or penalizing unmet demand via a linear penalty function. We compare different models and approaches by testing randomly generated network instances and an instance built on the Sioux–Falls network. Numerical results demonstrate the computational efficacy of the solution approaches and derive managerial insights.     

Driver fatigue: a vision-based approach to automatic diagnosis

In this paper, we describe a system that locates and tracks the eyes of a driver. The purpose of such a system is to perform detection of driver fatigue. By mounting a small camera inside the car, we can monitor the face of the driver and look for eye movements which indicate that the driver is no longer in condition to drive. In such a case, a warning signal should be issued. This paper describes how to find and track the eyes. We also describe a method that can determine if the eyes are open or closed. The primary criterion for this system is that it must be highly non-intrusive. The system must also operate regardless of the texture and the color of the face. It must also be able to handle changing conditions such as changes in light, shadows, reflections, etc. Initial experimental results are very promising even when the driver moves his/her head in a way such that the camera does not have a frontal view of the driver’s face.