大跨度连续梁桥施工新方法研究

基于大跨度连续梁桥的特点及某大桥施工时需要调整施工方法的实际情况,运用有限元分析软件,计算并比较了两种施工方法下结构受力情况及主梁线形变化状况。通过施工、设计及监控解决相关技术难点后,桥梁顺利合龙,并缩短了近1个月的工期,表明悬臂浇筑与支架现浇相接合这种施工方法是可行的。     

T形沉井基础施工关键技术

沉井基础施工技术在道路交通、房屋建筑施工中经常被采用。但异形沉井基础并不多见,不仅开挖复杂,而且技术难度大。结合国道107线郑州段改建工程泵站施工中应用沉井基础施工技术的成功实践,介绍沉井基础的施工方法、施工工艺和所遇问题的处理方法,为类似工程施工提供有益借鉴。     

四轮驱动ABS控制方法的分析

以四轮驱动汽车为研究对象,分析了其在差速器锁止时制动防抱死控制过程所出现的问题,归纳总结了四轮驱动ABS控制技术的特点及对制动安全性的影响。     

一种确定高圆簧横向刚度的有效方法

文中将高圆簧简化为等截面弹性直杆，导出高圆簧横向刚度计算式，并用试验结果进行修正，提出高圆横向刚度分析方法。理论分析和试验结果表明：高圆簧横向刚度的大小取愉于高圆簧的自由高度和工作高度，即由其结构几何参数和工作载荷决定。按文中方法确定的高圆簧横向刚度理论值与试验结果间的最大误差不超过１０％，满足工程理论分析要求。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

从一起船舶主机拉缸故障谈柴油机润滑油的选用

通过某LPG船一起主机拉缸案例,阐述船舶柴油机润滑油合理选用和管理的重要性,讨论选用润滑油应根据船舶柴油机的型号、燃油品质等具体情况,充分考虑润滑油的黏度等级和碱度。介绍船用柴油机润滑油国内外主要生产商及其相应的产品牌号。     

Optimal placement of omnidirectional sensors in a transportation network for effective emergency response and crash characterization

Rapid motor vehicle crash detection and characterization is possible through the use of Intelligent Transportation Systems (ITS) and sensors are an integral part of any ITS system. The major focus of this paper is on developing optimal placement of accident detecting omnidirectional sensors to maximize incident detection capabilities and provide ample opportunities for data fusion and crash characterization. Both omnidirectional sensors (placed in suitable infrastructure locations) and mobile sensors are part of our analysis. The surrogates used are acoustic sensors (omnidirectional) and Advanced Automated Crash Notification (AACN) sensors (mobile). This data fusion rich placement is achieved through a hybrid optimization model comprising of an explicit–implicit coverage model followed by an evaluation and local search optimization using simulation. The compound explicit–implicit model delivers good initial solutions and improves the detection and data fusion capabilities compared to the explicit model alone. The results of the studies conducted quantify the use of a data fusion capable environment in crash detection scenarios, and the simulation tool developed helps a decision maker evaluate sensor placement strategy.     

松花江大桥异形双壁钢围堰的构造与分析

介绍了松花江大桥35#墩异形双壁钢围堰的构造,并用ANSYS对其结构进行了分析,得出了该结构的应力和位移分布,依据分析结果,优化了原设计尺寸,对提高产品的强度、刚度及安全性能具有一定的指导意义。     

对于渔船避让的几点见解

阐述了大连——日本航线上经常遇到的渔船种类及作业特点,总结出针对不同种类的渔船在捕捞过程中应采取的必要措施,为以后在该航线上行驶的远洋船舶驾驶人员提供经验借鉴。     

中英思维模式差异对英汉学术论文写作的影响

探讨了中英语篇思维模式差异对英汉学术论文写作中论证方法的影响问题.文章通过分析指出,中英思维模式存在着直觉与抽象、本体与客体和螺旋与直线型差异,并因此导致英汉学术论文中论证方法在修辞手段、引经据典、引用权威等方面的使用差异.文章最后指出,只有了解英汉思维模式的差异,分析其文化成因,才能真正实现跨文化写作的成功.