The Alternative Motor Fuels Act, alternative-fuel vehicles, and greenhouse gas emissions

The corporate average fuel economy (CAFE) standard is the major policy tool to improve the fleet average miles per gallon of automobile manufacturers in the US. The Alternative Motor Fuels Act (AMFA) provides special treatment in calculating the fuel economy of alternative-fuel vehicles to give manufacturers CAFE incentives to produce more alternative-fuel vehicles. AMFA has as its goals an increase in the production of alternative-fuel vehicles and a decrease in gasoline consumption and greenhouse gas emissions. This paper examines theoretically the effects of the program set up under AMFA. It finds that, under some conditions, this program may actually increase the production of fuel-inefficient gasoline vehicles, gasoline consumption and greenhouse gas emissions.     

大厚度半刚性基层层间结合技术室内试验研究

文章通过室内直剪试验,对大厚度水泥稳定碎石基层上下层结合状态进行研究,分析了大厚度水泥稳定碎石基层上下层浇筑间隔时间、养生时间及水泥浆用量对层间抗剪性能的影响,并提出了最佳施工工艺。     

燃料电池气体温湿度与电堆性能分析

系统性能指标是实现燃料电池工程化应用的瓶颈之一,系统搭建和调试过程中,空气与燃料温湿度是影响质子交换膜燃料电池性能的重要因素,对系统控制策略和辅机搭配方案的制定产生很大影响。本文通过实验与统计相结合的研究方式,研究15 kW燃料电池电堆在增湿温度分别为60℃、70℃和80℃条件下分别进行氢空单侧增湿、双侧增湿和不增湿时的输出功率、发电效率和单电池电压一致性。其中输出功率采用测试台直接测量、发电效率通过经验公式计算、电压一致性则通过巡检记录和统计方法相结合的方式评价。结果表明70℃时各增湿方案下优于其他温度同等湿度条件下的电堆性能,有增湿条件明显优于无增湿方案电堆性能,而双侧增湿和氢空单侧增湿对电堆性能影响不大。     

船舶绿色电源PEMFC及其性能影响因素分析

能源与环境制约了各国经济的持续发展,绿色船舶成为当前船舶行业的发展趋势,燃料电池作为绿色电源在船舶行业具有广阔的应用前景。燃料电池是一种多输入的电化学反应装置,影响因素较多。该文在验证了质子交换膜燃料电池(Proton Exchange Membrane Fuel Cells,PEMFC)稳态建模正确性的基础上,通过稳态建模,利用MATLAB对影响PEMFC性能的各因素进行了分析讨论,并给出了各影响因素的影响大小。最后,在PEMFC的控制和设计上提出了一些指导性的建议。     

稀燃快燃点火系研发的试验研究

利用火花能量转换原理和能量叠加原理．提出了一种稀燃快燃点火系．简要介绍和分析了它的组成及工作原理．并对其匹配传统点燃式发动机的适应性进行了试验研究.     

有轨电车氢燃料电池系统通风散热方法研究

为解决有轨电车氢燃料电池系统的散热问题,文章提出一种新型车载氢燃料电池系统通风散热方法,分析了该方法的散热原理和控制策略,并对通风散热结构进行了详细介绍.该车载氢燃料电池系统通风散热方法提高了系统散热效率,降低了散热风机能耗.     

选择性催化还原技术在船舶上应用的现状分析

本文首先介绍了IMO NOx排放规则,指出SCR技术是目前最有效的应对措施。在介绍SCR系统基本组成及工作原理的基础上,讨论了目前此领域的两个研究热点:在重质燃油的使用条件下和二冲程柴油机使用条件下的SCR系统所面临的问题。     

江海直达小型LNG运输船设计研究

讨论江海直达小型LNG运输的设计要点。以1 000 m3LNG运输船为目标,结合武汉长江大桥下游的长江平流通航条件以及投资和营运经济性,探讨相适应的船型尺度,确定合适的航速以及液货舱型式,对于机型的选择进行分析比较,提出较为合适的船型配置方案建议。     

The design of a terminal for dangerous goods

This paper aims at examining the possibility of setting up a model terminal for the transportation of dangerous goods. It should be designed in such a manner that its use would be possible for any kind of transportation.

This consideration has been prompted by the interface between transportation planning and technology, as well as by the tendency for harmonizing international recommendations pertaining to the transportation and handling of dangerous goods, especially during the last decades where unified transport has gained ground due to the advantages provided for the safe consignment of dangerous cargoes.

Since the large increase in terminal productivity is due to the heavy investments that were effected in terminal installations and to the modernization of the administration‐management of terminals, a mathematical simulation has been adopted to assist the determination of the capacity of a terminal for dangerous goods.

It is evident that different criteria and various assumptions have been taken into account in order to facilitate a deeper analysis, without ignoring the contribution of dangerous goods to the socio‐economic development.

From the outset of the study, it was already clear that the said process will make it possible to present—as a model—a simple but well defined situation for the purpose of drawing useful conclusions.     

燃料辅助喷射对柴油机起动着火及排放的影响

为了研究辅助燃料对柴油机起动工况着火及排放的影响规律,在柴油机起动过程中,向进气道内分别喷射不同浓度的乙醚和C3H8进行了试验。试验结果表明:辅助喷射适当种类的燃料,可实现诱导、促进着火并改善燃烧的目的。辅助燃料除应具备良好的挥发性外,其着火性也是改善起动性能的重要因素。进气道喷射C3H8会抑制起动着火性,随喷射浓度的增加,燃烧恶化,HC排放升高;喷射适量浓度乙醚,可以促进起动过程着火,完全消除起动工况失火和不完全燃烧循环,在降低HC排放的同时,减少PM排放50%以上。