城市人行天桥美学造型简析

主要阐述城市人行天桥的造型与景观的关系,城市人行天桥造型中的城市美学以及对人行天桥美学设计的认识,提出从造型与景观角度塑造城市人行天桥的观点.对城市建设有一定的应用价值.     

Policy challenges of increasing automation in driving

The convergence of information and communication technologies (ICT) with automotive technologies has already resulted in automation features in road vehicles and this trend is expected to continue in the future owing to consumer demand, dropping costs of components, and improved reliability. While the automation features that have taken place so far are mainly in the form of information and driver warning technologies (classified as level I pre-2010), future developments in the medium term (level II 2010–2025) are expected to exhibit connected cognitive vehicle features and encompass increasing degree of automation in the form of advanced driver assistance systems. Although autonomous vehicles have been developed for research purposes and are being tested in controlled driving missions, the autonomous driving case is only a long term (level III 2025 +) scenario. This paper contributes knowledge on technological forecasts regarding automation, policy challenges for each level of technology development and application context, and the essential instrument of cost-effectiveness for policy analysis which enables policy decisions on the automation systems to be assessed in a consistent and balanced manner. The cost of a system per vehicle is viewed against its effectiveness in meeting policy objectives of improving safety, efficiency, mobility, convenience and reducing environmental effects. Example applications are provided that illustrate the contribution of the methodology in providing information for supporting policy decisions. Given the uncertainties in system costs as well as effectiveness, the tool for assessing policies for future generation features probabilistic and utility-theoretic analysis capability. The policy issues defined and the assessment framework enable the resolution of policy challenges while allowing worthy innovative automation in driving to enhance future road transportation.     

司机控制器可靠性试验探讨

探讨司机控制器可靠性试验,包括如何进行可靠性试验、试验的工作周期和流程设计、MTBF的时间单位与周期单位的换算、故障分级、试验结果的统计分析等相关问题,以解决开展可靠性试验中遇到的诸多实际问题,与机车厂提出的可靠性MTBF要求相呼应,为司机控制器可靠性试验铁道行业标准的制定提供参考.     

Modelling nutrient fluxes from sub-arctic basins: Comparison of pristine vs. dammed rivers

The deterministic Riverstrahler model of river functioning is applied for the first time to sub-arctic catchments. Seasonal nutrient (N, P, Si) deliveries to the coastal zone are simulated, and nutrient annual fluxes are established for the nearly pristine river Kalix (hereafter called Kalixälven) and the heavily dammed river Lule, (hereafter called Luleälven) both located in Northern Sweden and draining into the Bothnian Bay, Baltic Sea.For Kalixälven simulations are performed with a runoff calculated from precipitation, evapo-transpiration and temperature data for the period 1990–1999, using a hydrological model calibrated on observed monthly discharges at the river outlet. The same hydrological parameters are used to calculate specific runoff for the Luleälven basin in absence of dam regulation. Reservoir filling and emptying are simulated using a simplified representation of their management rules. Diffuse sources of nutrient are evaluated according to land cover of the catchment. The simulated seasonal trends are within the range of the observed data, in particular for discharge, dissolved silica, total phosphorus, inorganic nitrogen and total organic carbon. Specific runoff is 50% higher in the Luleälven than in the Kalixälven watershed due to higher altitudes and precipitations. Average silica, nitrate and phosphorus concentrations are much lower in Luleälven than in Kalixälven. Comparison of model results for the Luleälven with and without dams shows a reduction of respectively 25% and 30% in silica and phosphorus fluxes delivered at the outlet, while nitrogen delivery is increased by 10% in the dammed vs. undammed river system. The model allows assessing the respective role of reservoir trapping of nutrient in the reservoir through algal uptake and sedimentation, and of changes in the vegetation induced by flooding the valley formerly covered by forests and wetlands.     

Estimates of vertical mixing during a Lagrangian experiment off the Galician coast

An adjoint 1-D model was used to determine vertical diffusivity coefficients from temperature profiles collected within a filament escaping from the Galician coast following an upwelling event. The optimisation scheme ended with relatively high diffusivity values within the thermocline (9×10⁻⁵ m² s⁻¹). Such high values are relevant for biogeochemical exchanges between surface and deep waters in stratified areas.The optimised values were several orders of magnitude higher than the bulk of diffusivity measurements recorded with a free-falling device; however, the optimisation solution was consistent with the arithmetic mean of the measurements in the thermocline (7.7×10⁻⁵ m² s⁻¹), giving more weight to the few largest values. Below the thermocline, the data assimilation method failed because of the three-dimensional nature of the advective field of the upwelling system. Ignoring this advective forcing in the model led to estimates that were two orders of magnitude too high.The results suggest that turbulent mixing is a random process where a few intense events determine the average mixing that drives the long-term evolution of the water column structure. This statistical property is very important when one wants to use instantaneous diffusivity measurements for modelling purposes.     

Variability of the Bohai Sea circulation based on model calculations

The circulation and the hydrography of the Bohai Sea are simulated with the Hamburg Shelf Ocean Model (HAMSOM). The model is three-dimensional, prognostic baroclinic and has a resolution of 5 min in latitude and longitude and 10 layers in the vertical. It is initialised and forced with the five main tidal constituents, temperature and salinity distributions taken from the Levitus database, monthly mean river run-off values and European Centre for Medium Range Weather Forecast (ECMWF) re-analysed data of air pressure, wind stress and of those parameters relevant for the calculation of heat fluxes. The simulation period covers 14 years from 1980 to 1993 due to the availability of the time-dependent ECMWF forcing.The results are analysed by means of time series and EOFs focussing on the interpretation of fluctuations with periods above the tidal cycle. Furthermore, tracer simulations are carried out and turnover times are calculated in order to evaluate the importance of these fluctuations on the renewal and transport of water masses in the Bohai Sea.One of the major outcomes of the investigation is the overall dominance of the annual cycle in all hydrographic parameters and the importance of stochastic weather fluctuations on the transport of water masses in the Bohai Sea.     

列车运行数字仿真及其在技术标准优化建模中的应用

本文详细论述了列车运行数字仿真模型和基于仿真计算结果的运营指标的建模方法，并给出了仿真逄例也结果分析，以列车运行数字仿真的计算结果作为建模的基础数据具有一致性和可比性强，模型可靠且精度高的特点。本研究为铁路主要技术标准综合优化的推广使用奠定了必要的基础，具有广阔的应用前景。     

城市人行天桥美学造型简析

主要阐述城市人行天桥的造型与景观的关系,城市人行天桥造型中的城市美学以及对人行天桥美学设计的认识,提出从造型与景观角度塑造城市人行天桥的观点.对城市建设有一定的应用价值.     

车削加工物理仿真技术研究

提出获得工件廓形的“三瞬心成形法”,建立多误差作用下车削加工工件精度预测数理模型,可预测实际加工工件表面变化趋势,可显示工件在任一位置的加工精度。