土工格栅在治理沥青路面裂缝中的应用

裂缝是沥青路面常见病害。应用非织造土工织物——多功能双向土工格栅治理高等级公路沥青路面的裂缝,取得了良好的效果,并对土工格栅的应用进行了定量计算。     

基于分离迭代和耦合时变的列车—轨道—桥梁耦合系统高效动力分析混合算法

为提高列车—轨道—桥梁耦合系统动力分析的计算效率,基于耦合时变法及分离迭代法,提出了1种混合算法。该算法将列车—轨道—桥梁耦合系统分解为车辆—轨道子系统和桥梁子系统。其中,车辆—轨道子系统在每一时间步需根据车辆位置对系统刚度系数矩阵进行更新,具有时变的特性;桥梁子系统的系统动力系数矩阵在整个动力分析过程中保持不变;车辆—轨道子系统与桥梁子系统通过钢轨与桥梁间作用力的平衡迭代实现耦合。利用朔黄重载铁路32m简支梁桥现场试验数据与由混合算法计算得到的分析结果进行对比,验证了混合算法的可行性。采用耦合时变法和混合算法分别计算列车通过蒙华重载铁路黄河龙门大桥的动力响应,结果表明:采用相同的时间积分步长时,2种方法拥有相同的计算精度,但混合算法比耦合时变法具有更高的计算效率,求解耗时降低了75%。     

船舶非线性横摇运动数值模拟研究

非线性大角横摇运动是危害船舶安全的重要因素,也是船舶水动力学关注的热点及难点问题。文章采用CFD方法,对某型驱逐舰船模在不同波长规则波中横浪航行时的横摇运动进行了数值模拟。通过与水池实验比对,数值仿真得到的稳定横摇幅值与实验值的误差在10%左右。同时,数值模拟证实了非线性横摇的两种典型特征—“多值”及“跳跃”现象。数值模拟结果表明,CFD方法可作为研究船舶非线性横摇运动的有效手段。     

Evaluation of added resistance in regular incident waves by computational fluid dynamics motion simulation using an overlapping grid system

A computational fluid dynamics simulation method called WISDAM-X was developed to evaluate the added resistance of ships in waves. The Reynolds-averaged Navier–Stokes (RANS) equation was solved by the finite-volume method and a MAC-type solution algorithm. An overlapping grid system was employed to implement rigorous wave generation, the interactions of ships with incident waves, and the resultant ship motions. The motion of the ship is simultaneously solved by combining the solution of the motion of the ship with the solution of the flow about the ship. The free surface is captured by treatment by the density-function method. The accuracy of WISDAM-X is examined by a comparison with experimental data from a container carrier hull form, and shows a fairly good agreement with respect to ship motion and added resistance. Simulations were also conducted for a bow-form series of a medium-speed tanker to examine the effectiveness of the WISDAM-X method as a design tool for a hull form with a smaller resistance in waves. It was confirmed that the WISDAM-X method can evaluate the added resistance with sufficient relative accuracy and can be used as a design tool for ships.     

Assessment of the volume of fluid method for free-surface wave flow

This study was concerned with the free-surface wave flow around a surface-piercing foil. The volume of fluid method implemented in a Navier–Stokes computational fluid dynamics code was employed. Three widely used discretization schemes for the volume of fluid method were assessed for a test case that involved general ship waves, spilling breaking waves in front of the leading edge, and bubbly free surfaces in separated regions. A single computational approach was selected for the comparison, and a grid-dependence study was carried out. The computational results were validated against existing experimental data, showing good agreement. The validation results suggest that all three discretization schemes perform well, but the best and most efficient results were obtained using the high-resolution interface capturing scheme.     

如何在企业中推行TPM活动

本文介绍了在企业内推行TPM的基本流程和各种方法,TPM从企业的基础出发,通过持续不断的小集团改善活动,让企业在一点一滴中逐步合理化,让员工在无形中养成自主管理的习惯和意识,在问题出现的萌芽就能得到发现并处理掉,最终达到"零"目标的追求。通过长期的TPM改善活动的推行必定带来一群朝气蓬勃的员工和一个管理卓越的企业。     

影响某艇喷水推进器推进性能的若干因素

基于某艇的推进性能需求,以喷水推进器设计工况为分析对象,采用计算流体力学（Computational Fluid Dynamics,CFD）方法,建立计算模型,研究叶轮叶顶间隙、流道格栅密度、艇底水底间距、双泵轴间距等工程应用因素对推进性能的影响,可为某艇喷水推进器的设计、安装与使用等提供合理依据。     

改进的等效线性化计算模型及在结构海床耦合系统动力分析中的应用

为探究结构-波浪-海床耦合系统的失稳破坏机理并建立能反映此机理的计算模型,将改进的哈丁模型引入等效线性化方法,使其能反映载荷频率、循环周次以及土体平均有效主应力等多因素的影响。该模型运用于结构-波浪-海床耦合系统的非线性动力响应分析,一方面与标准哈丁模型的计算结果以及在波浪水槽进行的模型实验进行了比较,另方面着重对土体模量退化以及接触面附近土体的强度软化进行了考察,获得了一些明确的认识。     

公路桥梁病害分析及检查

建于上世纪六、七十年代的公路桥梁，现在大多带病服务于现代交通运输中，因此，对这些桥梁进行病害检查及分析就显得十分重要。     

对公路项目施工前期策划的几点思考

施工单位在公路施工项目中若要实现质量目标、安全目标、进度目标、利润目标等等，一个好的前期策划工作是必不可少的。讨论了如何在公路项目中做好施工前期策划工作，提出了目标分解，建立完善的组织体系，明确各项任务计划，实行阶段性目标考核的一些看法。