长枕埋入式无碴轨道对谐振式轨道电路传输

对长枕埋入式无碴轨道泄漏电阻和感应阻抗对谐振式轨道电路传输特性的影响进行了分析,通过科学方法进行了测算,并提出了相应的解决方案,而且通过试验进行了验证,使得谐振式轨道电路在长枕埋入式无碴轨道上传输特性的改善有了科学依据.     

下陷单脊矩形波导传输特性研究

利用亥姆霍兹方程的有限差分格式,研究在下陷单脊矩形波导中,脊在中心位置且几何尺寸变化对传输特性的影响.计算了脊的尺寸变化时的截止波长cλ和单模带宽λc/cλ1,并给出了TE10和TE11模式的场结构图.通过与传统单脊矩形波导的对比,指出了下陷单脊矩形波导传输特性的优缺点.     

电控柴油机动力系统窜振控制策略研究

根据窜振时发动机转速波动特点设计了滤波器,提取出了窜振特征信息并设计了抑制算法;进一步将算法扩展为基于变采样周期的递推式,使之能应用于喷射控制过程的油量修正;通过对发动机转速波动频率的分析,避免了油量过度修正引起的发动机高频抖动。试验结果表明加速过程的传动系窜振现象能够被有效抑制。     

超短脉冲发生器

介绍一种超短脉冲发生器,它可以重复产生宽度极窄的高电压脉冲,而功耗却很低。这种电路可应用于超高分辨率雷达、扩频通信以及许多其它需要宽带辐射的场合,因而具有较高的实用价值。     

钢管混凝土拱桥力学特性试验研究

武汉江汉三桥、江汉五桥和南宁永和桥均为钢管混凝土拱桥。通过3座实桥的计算分析与静、动载试验,对钢管混凝土拱桥的力学特性做了研究。结果表明:目前钢管混凝土拱桥所用设计理论和方法可靠,施工方法可行且质量优良。     

车速自动控制系统检修

介绍车速自动控制系统的组成及工作原理,以及系统主要部件的检查。     

自动变速器控制技术研究

自动变速器的控制技术影响到变速器使用性能,介绍现代控制理论在自动变速器控制中的应用,如换档点控制,变矩器闭锁离合器控制,换档质量控制,适应性控制,模糊控制,容错控制等理论。     

Observer-based clutch disengagement control during gear shift process of automated manual transmission

A clutch disengagement strategy is proposed for the shift control of automated manual transmissions. The control strategy is based on a drive shaft torque observer. With the estimated drive shaft torque, the clutch can be disengaged as fast as possible without large driveline oscillations, which contributes to the reduction of total shift time and shift shock. The proposed control strategy is tested on a complete powertrain simulation model. It is verified that the system is robust to the variations of driving conditions, such as vehicle mass and road grade. It is also demonstrated that the revised system with switched gain can provide satisfactory performance even under large estimation error of the engine torque.     

Simulation study on the operating characteristics of a hybrid hydraulic passenger car with a power split transmission

In this paper, a hybrid hydraulic passenger car (HHPC) coupled with a power split continuously variable transmission (P-CVT) is proposed. This P-CVT is capable of splitting the power from the internal combustion engine into mechanical and hydraulic power flows. By adjusting the ratio of the mechanical power to hydraulic power, the P-CVT enables the transmission ratio to be changed continuously. Meanwhile, the P-CVT system can capture the braking energy and store it in the hydraulic accumulator for the next assistant driving. In order to quantitatively investigate the effect of applying P-CVT on improving the fuel economy and operating performance for the HHPC, a numerical simulation is conducted under typical city driving conditions. The simulation results demonstrate that, the P-CVT permits the engine to be run under a more efficient operating range. The total fuel consumption of the HHPC is reduced by 16.4% under the test conditions, compared with that of the original car.     

基于CBTC控制的全自动驾驶系统

主要介绍全自动驾驶(FAO)系统的发展和应用情况、系统的组成和特点,并提出引进采用该系统需要注意的问题。