我国甲醇汽车冷启动技术研究发展综述

甲醇燃料在国内已经大量运用于汽车发动机,但由于甲醇的物化特性导致甲醇发动机存在冷启动困难问题,文章通过查阅相关资料,总结了国内相关研究者针对这一问题所做研究,并提出甲醇汽车冷启动技术未来发展方向。结果表明只要采取一定的辅助措施,就能让甲醇发动机在特定温度下顺利起动。其中,效果最好的能达到在-25℃下顺利起动。     

某发动机缸盖碗型塞密封失效分析及解决案例研究

碗型塞又名堵塞,因碗型塞的结构相对简单,可靠性高,价格便宜,广泛应用于内燃机。通过碗型塞与孔的过盈配合,及密封胶双重作用进行密封,碗型塞作为发动机常见的水道,油道密封方式,常见问题主要为漏液,因其结构简单,漏液问题根因也常常容易忽视;文章主要围绕发动机碗型塞漏水问题整改进行了理论分析和试验验证,为问题解决提供参考。     

冷试技术在发动机装配线上的应用分析

冷试技术具有较多优势,为让该项技术可以在汽车行业获得更大的应用空间,文章重点分析了汽车发动机装配线上冷试技术中关键技术的具体运用。文章通过对机油压力、扭矩、进气真空度及排气压力、高速NVH检测与低速NVH、曲轴与凸轮轴正时以及传感器线速进行检测,对冷试技术在发动机装配线上的运用进行了分析。了解到发动机冷试技术可以全方位提高我国发动机质量,压缩发动机的质量检测成本,在汽车行业具有较好的应用前景。汽车发动机由于各项新技术的发展应用,其系统结构更加复杂,发动机中的外购件占成本比例随之增长,汽车制造企业必须对零部件系统加强检测。希望可以为相关从业人员具有一定的参考作用,并推进汽车行业更好的发展。     

混合对转推进系统设计与实船应用研究

为全面深入了解混合对转推进系统实船安装对船舶性能影响,为数值仿真和性能预报提供实船参考数据,以集装箱运输船为应用对象,提出了一种把吊舱推进器集成在挂舵臂上的混合对转推进系统(CRP-POD),详细阐述了CRP-POD的系统构成、工作模式和电气控制系统实船设计方案。通过实船试验和运行数据分析,安装混合对转推进系统的船舶与同系列安装常规推进系统的船舶相比,特定航行工况下航速有2~3%的提升、回转能力有所降低、航向稳定性上优于常规船。     

Benefit of speed reduction for ships in different weather conditions

Currently, the shipping industry is facing a great challenge of reducing emissions. Reducing ship speeds will reduce the emissions in the immediate future with no additional infrastructure. However, a detailed investigation is required to verify the claim that a 10% speed reduction would lead to 19% fuel savings (Faber et al., 2012).This paper investigates fuel savings due to speed reduction using detailed modeling of ship performance. Three container ships, two bulk carriers, and one tanker, representative of the shipping fleet, have been designed. Voyages have been simulated by modeling calm water resistance, wave resistance, propulsion efficiency, and engine limits. Six ships have been simulated in various weather conditions at different speeds. Potential fuel savings have been estimated for a range of speed reductions in realistic weather.It is concluded that the common assumption of cubic speed-power relation can cause a significant error in the estimation of bunker consumption. Simulations in different seasons have revealed that fuel savings due to speed reduction are highly weather dependent. Therefore, a simple way to include the effect of weather in shipping transport models has been proposed.Speed reduction can lead to an increase in the number of ships to fulfill the transport demand. Therefore, the emission reduction potential of speed reduction strategy, after accounting for the additional ships, has been studied. Surprisingly, when the speed is reduced by 30%, fuel savings vary from 2% to 45% depending on ship type, size and weather conditions. Fuel savings further reduce when the auxiliary engines are considered.     

The effectiveness of a European speed limit versus an international bunker-levy to reduce CO2 emissions from container shipping

In the fight to reduce CO₂ emissions from international shipping, a bunker-levy is currently under consideration at the International Maritime Organization (IMO). Faced with the inability of the IMO to reach an agreement in the short term, the European Commission is now contemplating a unilateral measure of a speed limit for all ships entering European Union (EU) ports. This paper argues that this measure is counterproductive for two reasons. Firstly, because it may ultimately generate more emissions and incur a cost per ton of CO₂ which is more than society is willing to pay. Secondly, because it is sub-optimal compared to results obtained if an international bunker-levy was to be implemented. These elements are illustrated using two direct transatlantic services operated in 2010.     

基于两级温差发电的船舶废热回收试验研究

对于船舶柴油机而言,其所做功的30%都以废热的形式随尾气排放到了大气中。利用温差发电(TEG)技术回收船舶余热进行发电具有极其广阔的发展前景。因此提出了一种利用船舶柴油机尾气废热进行两级温差发电的新型装置。在对两级温差发电系统进行建模后,搭建了两级温差发电装置并进行了测试。理论分析和实验结果表明该装置利用温差发电技术对船舶余热回收是可行的。当热端温度达到473 K时,该温差发电实验装置可输出功率250 W,系统热效率为5.35％,相比单级TEG在相同条件下4.04％的热效率,该系统提高了32％。最后,对系统优化和装置的进一步改进进行了探讨。     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.     

某船用柴油机SCR尿素喷射系统结构参数仿真优化

在建立的SCR系统三维仿真模型基础上,首先通过仿真性能分析,初步确定了尿素喷嘴位置、喷孔直径、喷孔数目及喷射方向等尿素喷射结构参数范围,然后采用正交试验法确定尿素喷射结构参数仿真试验方案。以NO_X转化率为优化目标,通过极差分析和方差分析得到优化的尿素喷射结构参数方案为:喷嘴与催化剂入口距离为7倍管径,喷嘴孔数为6孔,喷嘴孔径为0.6 mm,喷射锥角为30°。     

零航速减摇鳍水动力特性分析

分析零航速减摇鳍的升力模型和力矩模型,探讨正弦运动的鳍产生最大升力和最大转鳍力矩与转鳍速度的关系,经对比发现,同一鳍角幅值转鳍下任一时刻升力的大小与经过该点的角速度的平方成正比。为此,采用通用CFD软件计算方法,验证理论模型的规律,在数值仿真的基础上,拟合升力公式和力矩公式的各个系数,并将实船试验转鳍力矩与仿真结果进行对比,结果表明仿真结果能较好地反映实际转鳍力矩的变化规律。