排气动力效应在二冲程摩托车上的应用

排气动力效应对于二冲程摩托车的性能有很大影响，特别体现在排气净化消声器的结构设计中，设计得合理，将会在保证排放控制的前提下，动力性和经济性比原车都有所改善，已经通过模拟计算及实践获得了证明。     

基于键合图的车用蓄电池建模与仿真

按照键合图的规则,分别建立了蓄电池等效电路的键合图模型和冷却系统的键合图模型,然后将电系统和热系统耦合在一起,实现了蓄电池系统的键合图模型,最后建立了蓄电池的数学模型和仿真模型,并实现了动态仿真。     

CNG/柴油双燃料车用发动机排放特性研究

通过用YZA102Q柴油机改装的CNG／柴油双燃料发动机进行燃用双燃料和纯柴油两种情况下的对比试验。对CNG／柴油双燃料发动机THC、CO、NOx和烟度的排放特性，以及空燃比、引燃油量、喷油提前角对双燃料发动机排放的影响进行了研究和分析。     

国产摩托车排放现状及控制进程分析

本文根据百余种国产摩托车排气污染物底盘测功机工况法测试结果，建立了相应的数据库，本文综述了国产摩托车排气污染物排放现状，在对欧洲和台洲摩托车排放控制进行考察和分析的基础上，结合我国情况，提出了摩托车排放控制进程建议。     

Experimental evaluation of Heavy Duty Vehicle speed patterns in urban and port areas and estimation of their fuel consumption and exhaust emissions

Exhaust emissions and fuel consumption of Heavy Duty Vehicles (HDVs) in urban and port areas were evaluated through a dedicated investigation. The HDV fleet composition and traffic driving from highways to the maritime port of Genoa and crossing the city were analysed. Typical urban trips linking highway exits to port gates and HDV mission profiles within the port area were defined. A validation was performed through on-board instrumentation to record HDV instantaneous speeds in urban and port zones. A statistical procedure enabled the building-up of representative speed patterns. High contrasts and specific driving conditions were observed in the port area. Representative speed profiles were then used to simulate fuel consumption and emissions for HDVs, using the Passenger car and Heavy duty Emission Model (PHEM). Complementary estimations were derived from Copert and HBEFA methodologies, allowing the comparison of different calculation approaches and scales. Finally, PHEM was implemented to assess the performances of EGR or SCR systems for NO_X reduction in urban driving and at very low speeds.The method and results of the investigation are presented. Fuel consumption and pollutant emission estimation through different methodologies are discussed, as well as the necessity of characterizing very local driving conditions for appropriate assessment.     

车辆隔热壁K值计算中空气层的处理方法

对轨道交通车辆多层复合结构的隔热壁进行隔热性能理论计算与仿真计算的对比,对隔热壁内部空气层的隔热性能进行分析。结论为:在车辆多层复合结构的隔热壁K值计算中,当空气层厚度大于一定厚度时,流体自然对流对隔热壁的隔热性能影响较大。利用多项式密度(Polynomial Denisity)和Boussinesq模型两种算法,对所得结论进行了验证。     

船用厨房和具有烹调设备的配餐室的通风计算及空气处理方法

本文介绍了ISO 9943-2009国际标准和GBT 20846-2007中国国家标准中对船用厨房和具有烹调设备的配餐室的通风计算及空气处理中提出的送风量的计算方法，提出另一种更易于大家理解和接受的简易计算方法和空气处理过程，供工程技术及设计研究人员参考。     

Highway voting system: Embracing a possible paradigm shift in traffic data acquisition

The integration of internet and mobile phones has opened the door to a new wave of utilizing private vehicles as probes not only for performance evaluation but for traffic control as well, gradually replacing the role of traffic surveillance systems as the dominant source of traffic data. To prepare for such a paradigm shift, one needs to overcome some key institutional barriers, in particular, the privacy issue. A Highway Voting System (HVS) is proposed to address this issue in which drivers provide link- and/or path-based vehicle data to the traffic management system in the form of “votes” in order to receive favorable service from traffic control. The proposed HVS offers a platform that links data from individual vehicles directly with traffic control. In the system, traffic control responds to voting vehicles in a way similar to the current system responding to prioritized vehicles and providing the requested services accordingly. We show in the paper that the proposed “voting” system can effectively resolve the privacy issue which often hampers traffic engineers from getting detailed data from drivers. Strategies to entice drivers into “voting” so as to increase the market penetration level under all traffic conditions are discussed. Though the focus of the paper is on addressing the institutional issues associated with data acquisition from individual vehicles, other research topics associated with the proposed system are identified. Two examples are given to demonstrate the impact of the proposed system on algorithm development and traffic control.     

高速路网不停车收费车道优化布设方法

合理设置高速公路收费站ETC (Electronic Toll Collection)车道数量，对高速公路通行效率至关重要。针对目前路网中ETC与MTC (Manual Toll Collection)车辆混行的情况，考虑ETC的普及率，结合多用户路网均衡模型和排队论方法，建立基于双层规划模型的高速路网ETC车道优化布设方法。上层模型以车辆总通行时间最小为目标，优化设置进出收费站的ETC车道数量；下层模型为多用户路网均衡模型，反映ETC和MTC车辆的路径和收费车道选择行为。下层模型通过设计收费站的等价拓扑结构，表征收费站的车道使用规则及车辆的收费车道选择行为，并采用排队论方法估计ETC和MTC车道的收费排队时间。根据模型的特点设计了基于主动集的启发式算法，利用参数二进制与拉格朗日函数法确定迭代下降方向，解决了下降方向与步长难以计算的问题；通过内嵌优化函数的方式，保证在主动集转化过程中上层约束均不会失效，且避免了迭代过程中的模型解退化问题。基于上海市绕城高速进行实证分析，结果表明：随着ETC普及率的提升，收费排队时长按照负指数趋势下降；与按比例布设ETC车道的方法相比，所提方法最高可降低57.4%的收费排队时间，且该方法可以避免ETC车道布设过多对于MTC车道通行能力挤压造成的负面效果。研究成果可以有效指导高速路网ETC车道的布设，提高路网通行效率。     

飞机防冰腔结构参数的重要性测度

分析了常见的3种飞机防冰腔结构,应用Gambit软件建立了双蒙皮防冰腔结构网格模型。采用Spalart-Allmaras湍流模型模拟热气在防冰腔内的流动状况,采用Fluent软件进行传热效率分析,建立了防冰腔结构参数对传热效率的重要性测度模型。通过随机响应面法建立防冰腔结构参数与传热效率的函数关系,采用低分散性抽样法求解防冰腔结构参数的重要性测度,建立了防冰腔结构参数的重要性测度分析流程。分析结果表明:当笛形管中心到外蒙皮的距离从35.15mm增加到38.85mm时,传热系数由0.505减小到0.463;当双蒙皮通道高度从2.85mm增加到3.15mm时,传热系数由0.495减小到0.476;当射流孔孔径从1.90mm增加到2.10mm时,传热系数从0.505减小到0.494;当射流孔角度从14.25°增加到15.75°时,传热系数从0.476增加到0.494。防冰腔结构参数的重要性排序依次为射流孔角度、笛形管中心到外蒙皮距离、射流孔孔径、双蒙皮通道高度,在防冰腔结构加工与装配过程中,需要重点考虑射流孔角度与笛形管中心到外蒙皮距离这2个参数。