Fuel economy comparison of conventional drive trains series and parallel hybrid electric step vans

A hybrid electric vehicle (HEV) is a vehicle that combines a conventional propulsion system with an on-board rechargeable energy storage system to achieve better fuel economy than a conventional vehicle HEVs do not have limited ranges like battery electric vehicles, which use batteries charged by an external source. The different propulsion power systems may have common subsystems or components. The objective of this study is to compare the fuel economies of a conventional step van, a series hybrid electric step van (HESV), and a parallel HESV by calculating the fuel consumption using the ADVISOR software by NREL. We also showed the results of the vehicles in different driving cycles including the Central Business District bus cycles, the New York City Cycle, and the US EPA City and Highway cycles.     

电动客车电动热泵变频空调的研发与应用

介绍电动客车空调的发展历程,详述电动热泵变频空调的结构特点、性能优势及应用情况。     

基于虚拟仪器的军用电站谐波测试研究

军用电站的输出电能谐波指标是影响武器装备性能的一个重要指标,本系统将虚拟仪器技术应用于军用电站谐波测试,可以根据国军标的要求对谐波指标（THD）进行测试并得出结论,介绍了基于LabWindows／CVI的军用电站谐波分析仪的硬、软件设计,并详细讨论了谐波测试的算法及实现。     

基于探测车数据的路段行程时间估计

利用探测车数据进行路段行程时间估计面临着两类误差：采样误差和非采样误差,从而导致估计结果精度不高和可靠性差。在回顾已有估计方法的基础上,有针对性地引入了自适应式卡尔曼滤波,建立了相应的状态方程和观测方程,利用相似时间特征的历史数据标定了状态转移系数,并对滤波进行了求解。以实际数据对估计方法进行了验证,平均相对误差为13.13%。研究表明,自适应式卡尔曼滤波能够应用到基于探测车数据的路段行程时间估计中来,并具有估计精度高、收敛速度快、参数少、对初值不敏感等优点。     

转向横拉杆弹性对车辆操纵稳定性的影响研究

为了研究转向横拉杆的弹性对车辆操纵稳定性的影响,利用ADAMS软件建立了某轿车的多体动力学模型并进行了操纵稳定性的仿真分析。对于操纵稳定性的稳态特性,采用了ISO4138标准,在车辆行驶100 km/h下的固定圆周转向规程来进行评价;对于瞬态操纵稳定性特性,则采用ISO7401标准中方向盘扫频输入的响应特性来进行评价。仿真结果表明,转向横拉杆的弹性与轿车操纵稳定性的不足有很大关系,如果弹性横拉杆刚性过大,则需要1个较大的转向传动比以弥补其不足转向特性。因此,在汽车设计开发中,必须将转向横拉杆的弹性特性和转向传动比综合平衡考虑,两需要很好的匹配才能保证其具有良好的操纵稳定性。     

模拟自治汽车列队通信控制系统设计与实现

介绍了模拟自治汽车列队通信控制系统的设计与实现过程,提出了1种基于自治汽车列队通信系统的研究方法。在分析自治汽车列队通信系统的影响因素及其规律基础上,针对通信系统的3层构架,探索并实现了自治车队的通信、协调等功能。     

Vehicle rollover avoidance by application of gain-scheduled LQR controllers using state observers

Many researches have been conducted in the area of control applied to vehicle dynamics, aiming at reducing the possibility of the occurrence of the type of accident known as rollover. In this research, based on a common nonlinear model and its linearisation, a method for properly selecting matrices for solving the Riccati equation considering different speeds was proposed. The method showed in which ways speed really influences the choice of controller gains. By developing the dynamic equations for the yaw- and roll-coupled motions and modelling of controllers and state observers, it is possible to compare the efficacy of this control strategy using both linear and nonlinear simulations using Matlab. Significant results were obtained regarding the reduction of the rollover coefficient for a double-lane change manoeuvre at different speeds, thus indicating advantages of using this controller in practical cases.     

用高温超导线圈和常导线圈构成的混合式电磁悬浮系统

常导电磁吸力悬浮系统悬浮气隙小、悬浮功率大,电动斥力悬浮系统不能实现静止悬浮、磁场污染大。由于受电流变化率限制,单独采用高温超导线圈构成的电磁吸力悬浮系统不能实现稳定悬浮。经分析比较,提出了一种用高温超导线圈和常导线圈构成的混合式电磁吸力型悬浮系统方案。采用这种混合式悬浮方案可增大悬浮气隙、实现稳态"零"功率悬浮、减轻车体重量、降低制冷费用、且无磁场污染。     

京秦线提速路涵过渡段动力仿真与试验对比

结合京秦线提速改造工程进行了列车 路基动力仿真计算。在不同速度条件下,通过对路涵过渡段加固前后状态下机车车辆运行安全舒适性指标、轨道及路基主要动力性能指标的分析计算,对京秦既有线路涵过渡段提速到200km/h的适应性及加固方案的可行性提出了相应评价意见与建议,并与随后的实车试验进行了对比。试验测试结果验证了仿真分析的可靠性。     

新能源汽车多功能试验台的开发

为满足新能源电控系统开发的需要,长城汽车自行研制了一套适用于新能源车辆的多功能试验台,它可以实现快速原型阶段开发、整车控制器开发、电机控制器开发、DC/DC开发、飞思卡尔及英飞凌开发板试验以及手工焊接调试功能.本文对试验台的总体架构以及主要电路模块进行详细介绍.