应用线弹性疲劳损伤理论的沥青路面轴载换算

应用疲劳损伤力学基本原理,探讨了适用于沥青路面轴载换算的新方法,并对该方法拟合的公式与规范按弯沉等效推荐的当量轴载换算公式进行了比较。计算结果表明在进行沥青路面轴载换算时,采用不同的等效换算原理,将导致非标准轴载与标准轴载当量换算系数上的不同,前者较后者大。这种差异一方面直接影响沥青路面的结构厚度设计,对设计年限内累计当量标准轴载作用次数的低估,必然导致沥青路面早期破损现象的发生;另一方面揭示弯沉等效表征的是路面结构的瞬间刚度性质,代替不了路面结构的长期疲劳强度特性。     

半刚性基层材料路用性能的试验研究

通过室内试验,研究了3种半刚性基层材料(水泥碎石、水泥粉煤灰稳定碎石、二灰碎石)的强度特性、断裂韧度、干缩特性及疲劳性能,比较了它们的路用性能。试验结果表明:半刚性基层材料的断裂韧度与弯拉强度具有一定的相关性;二灰碎石与水泥类稳定碎石相比,强度和断裂韧度较低,干缩性能和疲劳性能较好;水泥类稳定碎石抗弯拉强度比二灰碎石高,可弥补其疲劳寿命衰减过快的不足;用粉煤灰代替部分水泥,有广泛的工程应用前景。     

高液限土的改良技术研究

高液限土主要分布于我国南方地区,是公路修筑中常见的特殊土之一,我国有关规范规定其不得直接用于路基的填筑。本文对广东某高速公路的高液限土进行了详细的室内稳定剂改良试验,得出了不同处治方法的改良效果。铺筑了采用康耐稳定剂改良的高液限土试验路,并进行了相应的观测,初步明确了康耐稳定剂改良高液限土路基的稳定效果。     

A regression and beam theory based approach for fatigue assessment of containership structures including bending and torsion contributions

Container shipping has been expanding dramatically during the last decade. Due to their special structural characteristics, such as the wide breadth and large hatch openings, horizontal bending and torsion play an important role to the fatigue safety of containerships. In this study the fatigue contributions from vertical bending, horizontal bending and torsion are investigated using full-scale measurements of strain records on two containerships. Further, these contributions are compared to results from direct calculations where a nonlinear 3D panel method is used to compute wave loads in time domain. It is concluded that both bending and torsion have significant impacts on the fatigue assessment of containerships. The stresses caused by these loads could be correctly computed by full-ship finite element analysis. However, this requires large computational effort, since for fatigue assessment purposes the FE analysis needs to be carried out for all encountered sea states and operational conditions with sufficient time steps for each condition. In this paper, a new procedure is proposed to run the structure finite element analysis under only one sea condition for only a few time steps. Then, these results are used to obtain a relationship between wave loads and structural stresses through a linear regression analysis. This relation can be further used to compute stresses for arbitrary sea states and operational conditions using the computed wave loads (bending and torsion moments) as input. Based on this proposed method for structure stress analysis, an efficient procedure is formulated and found to be in very good agreement with the full-ship finite element analysis. In addition it is several orders of magnitude more time efficient for fatigue assessment of containership structures.     

Towards a model of hydrodynamic damping for a circular cylinder with helical strakes at low KC

This paper investigates the hydrodynamic damping of a circular cylinder with helical strakes at Keulegan-Carpenter (KC) number from 0.07 to 3 in the presence of steady currents. Experiments were performed with a straked cylinder oscillating in either in-line or cross currents over Reynolds number (based on the oscillating velocity amplitude) varying from 1260 to 54,000. With in-line current being present, the measured drag coefficients of the straked cylinder are found to depend on the ratio between the oscillating velocity amplitude and the steady current velocity. This phenomenon is further confirmed by computational fluid dynamics using large-eddy simulations. The drag coefficients obtained from the numerical simulations agree well with the experimentally determined values. Similar phenomenon is observed for the cases with cross background current. Based on the experimental data, empirical formulae are proposed to evaluate drag coefficients. These results are of importance in estimating the resonant motion and the fatigue life of risers, e.g. water intake risers, in the flow regime of low KC. Finally, recommendations are provided for fatigue analysis of risers with helical strakes from the perspective of engineering practice.     

Time domain analysis procedures for fatigue assessment of a semi-submersible wind turbine

Long term time domain analysis of the nominal stress for fatigue assessment of the tower and platform members of a three-column semi-submersible was performed by fully coupled time domain analyses in Simo-Riflex-AeroDyn. By combining the nominal stress ranges with stress concentration factors, hot spot stresses for fatigue damage calculation can be obtained. The aim of the study was to investigate the necessary simulation duration, number of random realisations and bin sizes for the discretisation of the joint wind and wave distribution. A total of 2316 3-h time domain simulations, were performed.In mild sea states with wind speeds between 7 and 9 m/s, the tower and pontoon experienced high fatigue damage due to resonance in the first bending frequency of the tower from the tower wake blade passing frequency (3P).Important fatigue effects seemed to be captured by 1 h simulations, and the sensitivity to number of random realisations was low when running simulations of more than 1 h. Fatigue damage for the tower base converged faster with simulation duration and number of random realisations than it did for the platform members.Bin sizes of 2 m/s for wind, 1 s for wave periods and 1 m for wave heights seemed to give acceptable estimates of total fatigue damage. It is, however, important that wind speeds that give coinciding 3P and tower resonance are included and that wave periods that give the largest pitch motion are included in the analysis.     

Assessment of fatigue strength of steel butt-welded joints in as-welded condition – Alternative approaches for curve fitting and mean stress effect analysis

Experimental fatigue data for butt-welded joints in as-welded condition and under constant amplitude tensile loading (secondary bending included) were analyzed using the nominal stress system and the notch stress system. Two approaches were used; a standard fitting procedure and minimization of the sum of squared perpendicular distances from a line with a fixed and free slope. In all cases, the latter method gave better agreement between the experimental and predicted fatigue life and fatigue strength. The analyses showed both with all broken specimen data included and with reduced data that the FAT225 curve, as recommended by IIW, might be too optimistic for the notch stress approach in the case of butt-welded joints in as-welded condition. It was also found that use of the local stress ratio instead of the applied stress ratio might explain many issues concerning current observations and apparent inconsistencies in reported literature.     

基于欧洲规范的板桩码头设计方法简介

基于极限状态设计的欧洲土木工程设计规范Eurocode代表了当前工程设计的最高水平;部分欧洲国家板桩码头设计则直接采用该规范,例如英国海上工事设计规范BS6349。本文介绍了基于BS6349和Eurocode规范的板桩码头设计方法,有助于设计人员理解和使用欧洲板桩规范。     

大型浮式结构物结构碰撞性能分析

碰撞事故是基于事故极限状态设计重点考虑的对象,在设计中越来越受到重视。文章以某大型浮式结构物为研究对象,总结分析ISO、API、HSE、DNV、ABS、BV、LR等标准及规范对碰撞场景的相关规定,提出碰撞分析场景及设计衡准;基于简化分析技术建立碰撞力学模型,利用动态非线性结构分析软件ABAQUS进行仿真分析,通过分析塑性应变、塑性变形、吸能、碰撞力及运动等,校核评估舷侧结构的耐撞性能;分析不同碰撞位置、撞击船型式等对碰撞性能的影响。研究表明:目标大型浮式结构物舷侧结构碰撞事故极限强度满足规范要求,首柱撞击相对比较危险,可作为计算分析控制工况。     

HRV分析在驾驶疲劳中的应用研究

驾驶员在驾驶过程中易因疲劳、烦躁和压力等不良生理反应引发事故,而心率变异性(HRV)作为评价人体自主神经系统活性,反映人体生理状态的重要指标,能够准确评估驾驶员的精神状态。为了有效预防事故发生,文章介绍了驾驶员在驾车过程中HRV指标的变化及其应用。结果表明HRV指标结合相应算法模型对驾驶员生理状态识别的准确率高达90%以上,能够有效降低事故发生率。