路面铣刨机械的养护

通过对路面铣刨机铣削装置的工作方式、工作原理的理论分析,针对路面铣刨机在正常作业过程中零件磨损的现象,探讨了一些养护方法,提出了路面铣刨机械的一些养护措施,对铣刨机的合理使用与维护具有重要意义.     

某散货船试航中主机滑油低压故障的排除

文章分析了某散货轮在试航中主机多次出现因滑油低压而报警停车的故障现象,并将该故障出现的原因及排除过程进行了总结和思考,以期为船厂、船东以及试航的相关人员提供参考。     

Integrated approach to determine highway flooding and critical points of drainage

Among the natural hazards that threaten transportation infrastructure, flooding represents a major hazard to highways as it challenges their design, operation, efficiency and safety. In extreme cases, it may lead to massive obstruction of traffic and direct damages to the road structures themselves and indirect damages to the economic activity and development of the region. To enable the prevention of such consequences, and the proposition of adaptive measures for existing infrastructure, this paper presents an integrated framework to identify the most vulnerable points to flooding along a highway. This is done through the combination of remote sensing information (e.g. LiDAR based Digital Elevation Model, satellite imagery), a high-quality dataset, and a quasi-2D hydrodynamic model. The forcing condition is defined using a hyetograph associated to a storm with duration of 1 day and return period of 100 years. The selected highway is located in the Mexican state of Tabasco, where extreme precipitation events and floods are frequent. Results demonstrate the ability of the methodology to identify critical water levels along the road (h > 1.50 m) at those locations where flooding has been experienced, as well as points of inspection for the highway drainage. These locations were visited in the field and maintenance problems were detected that do increase its level of exposure. We show that this framework is useful for the generation of a flood management strategy to the analyzed highway, which includes an optimum location of adaptive measures to an anticipated more intense future climate.     

基于群决策层次理论的预防性养护方案决策

基于高速公路预防性养护决策方案选择的特性,使用群决策理论的层次分析法,通过对决策组成员意见的集合,得到了各成员动态权重,减少主观误差,提高决策方案结果的客观可靠性。通过案例,将措施费用、行车特征、技术因素、施工因素等作为目标层,对4种备选方案进行分析,得出最佳措施。案例结果证明群决策方法的有效性与可靠性,为选择合理的养护措施提供参考。     

基于BIM的公路隧道运维管理系统设计与开发

近年来,我国公路隧道建设里程快速增长,但在隧道运维管理中存在技术落后、管理人员配置不足等问题。针对管理中存在的问题,本文提出将BIM(building information modeling,建筑信息模型)引入公路隧道的运维管理,通过制定具体实施规划及设计系统架构,实现可视化的公路隧道运维管理。以浙江省41省道岭下隧道工程为依托,建立基于BIM的公路隧道运维管理平台,为公路隧道运维管理提供一种直观、便捷的管理方式,提高公路隧道的信息化管理水平。     

A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

基于物联网技术的高速铁路综合维修物流监控系统

提出了基于物联网技术的高速铁路综合维修物流作业管理流程及监控系统组成,并对该系统实现的关键技术问题即多阅读器碰撞问题进行了Matlab仿真实验和现场试验,研究结果表明利用概率功率控制算法的阅读器,在阅读器5台以下的情况,高铁综合维修物流监控系统多阅读器可利用嵌入式软件监控范围超过3.5 m,可达到比较理想的状态,保证了该系统实现的可行性.     

分段矩形天窗对京沪高速铁路通过能力影响分析

本文以高速铁路天窗分段为基本研究单位,按照沿线途中大站将京沪高速铁路划分为若干天窗分段,分析天窗分段对列车运行的影响时间范围。在统计列车平均停站系数、停站时分和起停车附加时分等参数的基础上,计算列车一次停站的能力扣除系数以及天窗影响时间范围内通过能力的扣除值,得出京沪高速铁路在开设分段矩形天窗时线路通过能力的理论值以及限制区段。     

舰船电力系统保护性能优化的自适应算法

为满足舰船电力系统保护在快速性和选择性方面的要求,提出保护性能优化模型,根据电力系统的运行方式、拓扑结构和故障类型的变化,实时在线计算并修改保护整定值的自适应保护方法。将快速性和选择性指标作为保护性能综合指标的基本元素,采用模拟退火粒子群算法进行优化,最终实现不同运行工况下保护性能最优的整定值自适应调整。并在PSCAD/EMTDC软件中建立包含自适应保护算法的舰船电力系统保护仿真模型,仿真结果证明所提方法可有效提高系统保护性能。     

长江下游福南水道港航功能调整及涉港水域平面布置

福姜沙河段是长江下游唯一的两级分汊、三汊(福南、福中和福北)并存且通航的河段,目前右汊即福南水道为主航道所在,且其右岸也是中国最大内河港苏州港张家港港区的主要作业区所在。根据长江南京以下河段12.5 m深水航道建设方案以及福南水道上口、转弯段水深不足或通航水域宽度不足的情况,结合福南水道内的港口岸线利用及泊位分布现状及其规划,本文分区段论证实际将成为专用进港航道的福南水道的航道等级及航道尺度,并对水道内港作业水域重新进行了平面布置。最后,采用数学模型对调整后的水域布置进行回淤研究,并提出初步的减淤措施。