海洋核动力平台全频段舱室噪声预报与降噪方案研究

随着新规范对船舶及海上工作平台提出了更高要求，舱室噪声的控制及优化设计越来越受到人们的关注。本文首先对全频段舱室噪声预报软件——VA One软件统计能量分析理论及软件概况进行了阐述，其次应用该软件对海洋核动力平台进行几何建模与仿真计算。通过对舱室仿真计算结果与标准指标要求的对比分析，在设计阶段提出了海洋核动力平台舱室空气噪声综合治理降噪方案，该措施可以缩短建造周期、降低制造成本，提高海洋核动力平台的舒适性与安全性，具有十分重要的经济效益和社会效益。     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

Use of localized necking and fracture as a failure criterion in ship collision analysis

This study explores the use of localized necking for failure modeling in maritime crash analysis, using large shell elements. The assumption that the failure of a large shell element occurs simultaneously with the onset of localized necking is revisited. This study particularly investigates the numerical implementation of the localized necking condition and its implications on the results of ship collision analysis involving not only plate rupture but also various failure mechanisms such as the crushing and tearing of web girders, stringers, and their intersections. Through a series of large-scale collision simulations, the effects of bending deformation on the initiation of necking, non-proportional loading paths, and ductile fractures not preceded by localized necking, are investigated. It is demonstrated that a localized necking-based fracture model provides a reasonable, relatively mesh-insensitive estimate of the onset of fracture in the outer hull panels; however, fracture propagation is very sensitive to the numerical implementation of the necking and fracture model, especially for the cases involving the crushing of web frames and stringers.     

现代城市社区物业管理服务创新模式研究

物业管理作为一个新型的服务行业,近年来随着城市化迅猛建设而呈现高速发展的态势,对现代城市物业管理服务现有的模式进行分析,探索物业管理服务模式的特点,发现其中的问题所在,进一步挖掘物业管理服务企业在各方面多元的服务潜力,物业管理服务企业与业主共同协作延伸增值服务空间,缓解双方之间的矛盾,促进物业管理服务的发展。     

半潜式支持平台靠泊海洋生产平台碰撞概率建模

为有效解决深水半潜式支持平台靠泊海洋生产平台过程中存在的碰撞问题,从碰撞事故发生原因入手,借鉴挪威船级社(Det Norske Veritas,DNV)DNV-RP-107规范中的船与海洋平台碰撞概率模型和美国公路与运输协会(American Association of State Highway and Transportation Officials,AASHTO)《美国公路桥梁防船撞设计指南》中的船桥碰撞概率模型,将支持平台发生向前的过分偏移引起的碰撞场景分为漂移碰撞和动力碰撞2种,建立事件树,得到支持平台靠泊海洋生产平台碰撞概率模型。在此基础上,估算支持平台靠泊碰撞海洋生产平台的概率,由此评估碰撞风险,为半潜式支持平台靠泊碰撞海洋生产平台场景下的相关规范制定提供参考。     

散货船舱口盖剩余强度

通过对散货船舱口盖极限强度的理论分析，采用了正交各向异性板及刚塑性模型进行了理论上的推导，并对7万t散货船的1号舱的舱口盖(两块对称滚动式)，进行了ILL66及IACS URS21(1998年版与上述ILL66的88议定书中载荷的量级相当)的外载荷的比较及线性和非线性的有限元分析。本文所采用的有限元的线性及弹塑性计算对实际的舱口盖进行评估的结果证明，IACS URS21(ILL66的88议定书)的标准比ILL66的标准有所提高。采用非线性有限元法是在初始设计阶段使用的可行方法。这些结果可供规范研制工作参考。     

Time-series analysis of remote-sensed chlorophyll and environmental factors in the Santa Monica–San Pedro Basin off Southern California

The time-series of remote-sensed surface chlorophyll concentration measured by SeaWiFS radiometer from September 1997 to December 2001 and the relevant hydrological and meteorological factors (remote-sensed sea surface temperature, atmospheric precipitation, air temperature and wind stress) in Santa Monica Bay and adjacent waters off southern California were analyzed using wavelet and cross-correlation statistical methods. All parameters exhibited evident seasonal patterns of variation. Wavelet analysis revealed salient long-term variations most evident in air temperature during El Niño 1997–1998 and in wind stress during La Niña 1998–1999. Short-period (<100 days) variations of remote-sensed chlorophyll biomass were mostly typical to spring seasons. Chlorophyll biomass was significantly correlated with air temperature and wind stress: an increase of chlorophyll biomass followed with 5–6-day time lag an increase of wind stress accompanied by a simultaneous decrease of air temperature. The mechanism of these variations was an intensification of phytoplankton growth resulting from the mixing of water column by wind stress and entrainment of nutrients into the euphotic layer.     

半约束模型试验--一种验证随浪和斜浪中波浪力计算的手段

本文采用半约束模型试验技术，对一条高速船在规则波中随浪和斜浪工况进行了流体动力系列试验，以探讨航运的安全性，验证作用于船体上波浪力的估算方法。对每次试验，以波动方程的形式采用数值估算方法确定环绕船模的波浪运动的时间历程。并用同样的方法从测量数据中提取垂荡和纵摇与模型测量运动，一阶波导纵荡、横荡作用力和首摇力矩。因此合理比较理论计算的波浪力与力矩的时间历程成为可能。这表明SSPA海事动力学的研究所(MDL)模型试验设施可以提供高质量的测量，与所述计算方法结合起来可用来验证理论计算和建立半经验方法。     

水深平均k—ε紊流模型在大尺度水域中的应用研究

本文利用Patanker求解紊动输运方程标准的SIMPLEC计算程式,对小尺度丁坝绕流进行了模拟计算,取得了与水槽试验一致的流速分布结果。为了探讨大尺度水域紊动量K、ε壁面边界条件的给定,本文将水槽看成是一种比尺模型,将水槽试验流速分布按重力相似和阻力相似准则延伸到大尺度水域,并以此研究k—ε模型模拟大尺度回流的置信水平。计算结果表明通过选择合适的紊动量壁面边界条件,该模型对大尺度回流计算也能取得较好的结果。