Physical environments influencing bicyclists’ perception of comfort on separated and on-street bicycle facilities

This study investigates the impacts of physical environments on bicyclists’ perceptions of comfort on separated and on-street bicycle facilities. Based on a field investigation conducted in Nanjing, China, we find that physical environmental factors significantly influencing bicyclists’ perception of comfort on the two types of facility. Cyclists’ comfort is mainly influenced by the road geometry and surrounding conditions on physically separated paths while they pay attention to the effective riding space and traffic situations on on-street bicycle lanes.     

Electric vehicles for greenhouse gas reduction in China: A cost-effectiveness analysis

There have been ongoing debates over whether battery electric vehicles contribute to reducing greenhouse gas emissions in China’s context, and if yes, whether the greenhouse gas emissions reduction compensates the cost increment. This study informs such debate by examining the life-cycle cost and greenhouse gas emissions of conventional vehicles, hybrid electric vehicles and battery electric vehicles, and comparing their cost-effectiveness for reducing greenhouse gas emissions. The results indicate that under a wide range of vehicle and driving configurations (range capacity, vehicle use intensity, etc.), battery electric vehicles contribute to reducing greenhouse gas emissions compared with conventional vehicles, although their current cost-effectiveness is not comparable with hybrid electric vehicles. Driven by grid mix optimization, power generation efficiency improvement, and battery cost reduction, the cost-effectiveness of battery electric vehicles is expected to improve significantly over the coming decade and surpass hybrid electric vehicles. However, considerable uncertainty exists due to the potential impacts from factors such as gasoline price. Based on the analysis, it is recommended that the deployment of battery electric vehicles should be prioritized in intensively-used fleets such as taxis to realize high cost-effectiveness. Technology improvements both in terms of power generation and vehicle electrification are essential in improving the cost-effectiveness of battery electric vehicles.     

Environmental impacts of public transport systems using real-time control method

Public Transport (PT) systems rely more and more on online information extracted from both operator’s intelligent equipment and user’s smartphone applications. This allows for a better fit between supply and demand of the multimodal PT system, especially through the use of PT real-time control actions/tactics. In doing so there is also an opportunity to consider environmental-related issues to approach energy saving and reduced pollution. This study investigates and analyses the benefits of using real-time PT operational tactics in reducing the undesirable environmental impacts. A tactic-based control (TBC) optimization model is used to minimize total passenger travel time and maximize direct transfers (without waiting). The model consists of a control policy built upon a combination of three tactics: holding, skip-stops, and boarding limit. The environmental-related measure is the global warming potential (GWP) using the life cycle assessment technique. The methodology developed is applied to a real life case study in Auckland, New Zealand. Results show that TBC could reduce the GWP by means of reduction of total passenger travel times and vehicle travel cycle time. That is, the TBC model results in a 5.6% reduction in total GWP per day compared with an existing no-tactic scenario. This study supports the use of real-time control actions to maintain a reliable PT service, reducing greenhouse gas emissions and subsequently moving towards greener PT systems.     

冻融作用下的沥青混合料力学特性

冻融损坏是冰冻地区沥青混合料的主要破坏形式。通过冻融循环作用下的沥青混合料单轴压缩和劈裂强度试验,分析了冻融循环次数、油石比等因素对沥青混合料力学特性的影响。试验得出,冻融循环次数和油石比对混合料的抗压和劈裂抗拉特性均有影响,油石比越小,影响越明显;在最佳油石比5.5%时,混合料的抗冻性能最好;冻融循环次数对沥青混合料力学特性的影响逐渐减弱,在10~12次冻融循环后,沥青混合料冻融后的强度和模量损失率均逐渐趋于稳定。     

氯离子在混凝土中渗透行为的研究

文章在干湿循环和全浸泡两种条件下，研究了氯离子在混凝土中的渗透性能，并考虑扩散系数随时间变化的因素．为准确地预测实际工况混凝土结构的使用寿命提供参考。     

基于剩余寿命可靠度的地铁车辆设备多部件趋近机会维修策略

当前地铁车辆的检修存在着过修和欠修的现象。在分析车辆设备全寿命的基础上,以全寿命周期单位时间维修费用最低为目标,建立了基于剩余寿命可靠度的预防性维修周期模型,并针对多部件维修周期问题提出了应用于多部件整体的趋近机会维修策略。通过算例分析,验证了模型的合理性和可用性,以及趋近机会维修策略的有效性。     

气泡混合土抗冻融循环性能试验研究

为解决冻土地区普通路基由于保温性能差导致的路基病害问题,采用保温隔热性能好的气泡混合土作为路基填料,可起到保护冻土、减少病害的作用。为探讨气泡混合土的抗冻性能,选取了不同容重的气泡混合土试件进行冻融循环试验研究,研究气泡混合土质量及强度损失规律,从而获知气泡混合土的容重对其抗冻性能的影响;进而,向气泡混合土试件中掺入玻璃纤维,探讨其对气泡混合土抗冻性能的增强作用。结果表明：气泡混合土的抗冻性能随着容重的增大而提高,表现为容重越大,所能经受的冻融循环次数越多,抗压强度和质量损失率越低;容重为800kg/m3的气泡混合土试件经过15次冻融循环后抗压强度迅速降低,经过100次冻融循环后,试件的质量损失达到9.2%;而容重为1 200kg/m3的气泡混合土试件在经过50次冻融循环后,抗压强度才开始明显降低,经过100次冻融循环后,试件的质量损失只有4.5%。玻璃纤维能显著提高气泡混合土的抗冻性能,其抗压强度损失率和质量损失率明显较未掺纤维的普通气泡混合土要小,且抗压强度和质量损失的速率明显降低;不同容重的气泡混合土试件掺入纤维后,经过50次冻融循环后,试件的抗压强度损失减少50%以上,质量损失减少40%以上。     

A stochastic optimization approach for the selection of reflective cracking mitigation techniques

PurposeIn Hot Mix Asphalt (HMA) overlays, the existing cracks in the underlying pavements can propagate upward to the new added overlay and may cause Reflective Cracks (RC). These cracks allow water infiltration to the underlying layers and causes further moisture damage as well as weakening the unbound layers. Over the years, several methods have been developed for mitigating the RCs. This study aims to investigate the current reflective cracking mitigation methods and develop a methodology for the selection of appropriate mitigation technique. The developed model is then applied to a case study in the state of Florida.MethodTo accomplish this goal, a nationwide literature review was conducted to better understand the current in practice methods in the United States. Moreover, a life cycle cost analysis (LCCA) in five different road types was performed to find the annuity of roadway rehabilitation for each of the mitigation methods. The uncertainty in the LCCA results is represented using Exploratory Modeling and Analysis (EMA) method. Then through a Multi Criteria Decision Making (MCDM) model, a stochastic optimization model was developed to find the appropriate reflective cracking mitigation solution under Florida’s climate and road conditions, based on different cost and performance weights.ResultsBased on the available data for the state of Florida, the LCCA results indicate that the annuity of maintaining the roadway with Fabrics and ISAC are lower compared to other methods. However, the results of stochastic optimization model reveal that while looking at the performance and cost at the same time, different methods would be more feasible. For instance, while the cost of the used method does not matter at all and only performance matters, STRATA® is more probable to be the appropriate mitigation technique. The findings of this research are critical for decision makers to better understand the most cost-effective mitigation technique in different conditions.     

基于生命周期理论的我国收费公路发展分析

收费公路类似自然生命,其成长和发展必然为一个具有若干阶段的连续过程。基于生命周期理论,对我国收费公路体系生命周期进行了探讨和分析。结果表明,2000年以后,我国收费公路进入成熟期;在2030年达到峰值后,收费公路在总量上开始缩减,进入衰退期,新的发展趋势也将逐渐体现。     

我国汽车产业循环经济模式的研究

在借鉴和总结国内外汽车产业在生态设计、减量化制造、废旧汽车回收再利用等方面的先进经验基础上,提出了汽车产业实施循环经济的"4R"原则,按产品生命周期的不同阶段分别探讨了实施循环经济的有效途径,并结合我国的实际特点,提出了相关的政策建议。