Observer-based clutch disengagement control during gear shift process of automated manual transmission

A clutch disengagement strategy is proposed for the shift control of automated manual transmissions. The control strategy is based on a drive shaft torque observer. With the estimated drive shaft torque, the clutch can be disengaged as fast as possible without large driveline oscillations, which contributes to the reduction of total shift time and shift shock. The proposed control strategy is tested on a complete powertrain simulation model. It is verified that the system is robust to the variations of driving conditions, such as vehicle mass and road grade. It is also demonstrated that the revised system with switched gain can provide satisfactory performance even under large estimation error of the engine torque.     

Shifting from car to active transport: A systematic review of the effectiveness of interventions

IntroductionA promising way to stimulate physical activity is to promote the choice for active modes of transport (walking and cycling). Over the past years, several interventions and policies have been implemented to stimulate this mode shift. However, information concerning the effectiveness of these interventions and policies is still limited. The aim of the present study was to systematically review the effectiveness of interventions designed to stimulate a shift from car use to cycling or walking and to obtain insight into the intervention tools that have been used to promote and/or implement these interventions.MethodsFive databases were searched and articles published in English, Dutch, German, Danish, Norwegian and Swedish were included. Only studies that focussed on a mode shift from car use towards active transport in a general adult population, which were published in peer reviewed journals and which investigated effectiveness were included. Intervention tools used were categorized by using the model of Hoogerwerf & Herweijer, as either legal, economic (subsidy, reward system, penalty), communicative (written materials, behavioural tools) and physical tools (providing bicycles, providing better bicycle facilities at work, adjustment of the environment).ResultsNineteen studies met our inclusion criteria. Studies included described work-place-based interventions, architectural and urbanistic adjustments, population-wide interventions, and bicycle-renting systems. Nearly all studies (except three) showed positive effects concerning a mode shift. Most of the included studies used more than one intervention tool and the tools used differed between types of interventions. However, information about the statistical significance of these results was often lacking and the study methodologies used were not of high quality.ConclusionNearly all studies showed results in a positive direction. However, the quality of the included studies was mostly low and intervention characteristics were poorly described.     

ZPW-2000A自动闭塞模拟试验

以成功应用于京沪线提速工程中的自动闭塞系统为例,介绍了ZPW-2000A的试验流程和模拟试验方法,并针对ZPW-2000A特有的小轨道探讨了模拟方案.     

双联齿轮坯少无飞边成形工艺及模具研究

针对目前双联齿轮坯加热次数多、飞边大、其后续机加式余量大、浪费材料、能源、成本高和投资大的现状，提出了一次加热、压机一次工作循环就可成形的双向挤镦复合工艺，实现少无飞边双联齿轮毛坯的成形。根据双联齿轮形状特点及挤镦复合工艺要求，确定了挤镦复合工艺模具的结构，并通过试验对其模具结构和挤镦复合成形双联齿轮坯工艺加以检验。     

插电式混合动力汽车高电压部件设计及布置

根据整车设计要求,建立插电式双电机MG1/MG2+行星轮系混合动力汽车高电压系统方案模型。通过理论计算及工程分析确定高压电池组、高电压线缆、双电机MG1/MG2、变频器(转换器/逆变器)、空调压缩机等高电压部件的结构及关键参数。针对高电压部件布置的安全及可靠性提出建议。     

相位连续移频信号的数字化实现

分析了相位连续与不连续移频信号的频谱并比较了它们的带宽。相位连续的移频信号有较窄的带宽,抗干扰性能强。目前,在移频轨道电路中产生相位连续信号的方法主要有两种:直接调频法,频率转换法。前者相位连续但频率稳定性差;后者频率稳定性高但相位近似连续。为克服上述不足,本文提出了数字化直接调频法,其相位连续、频率可调、频稳性高。     

ADCP在黄骅港水文测量中的应用

主要介绍了目前世界上先进的水文实时测量仪器ADCP在黄骅港水文系统的应用。概述在外业和内业方面的操作,测量精度的影响因素。     

汽车齿轮油的发展与选用

汽车齿轮油用于机械式变速器，驱动桥和轴向器的齿轮润滑，它起到润滑、冷却，防锈及缓冲的作用。首先，介绍了国内外汽车齿轮油的分类和发展趋势，其次，介绍了齿轮油的澜性和抗磨性，低温操作性和粘温性，热氧化安全性，抗腐蚀性和防锈性，另外，介绍了齿轮油的选用。     

船舶发电机组并联时运行负载自动转移故障分析

通过对某船舶发电机并联运行负载自动转移原因的分析,总结了船舶发电机组液压调速器日常管理和维护保养的一些经验。     

油料应用技术

主要介绍机械设备中常用的燃料油、润滑油、润滑脂、液压油和某些特种油的特性、牌号、分类和使用范围，以及实际工作中如何正确选用．