铁路专用线视频监控系统的研究

介绍一种与车号识别相结合的视频监控系统,描述系统构成和功能.     

电动汽车V2G关键技术研究综述

V2G(Vehicle-to-grid)技术能够优化能源效率,参与电网调度,促进电网的安全性、稳定性、可靠性和经济性。文章首先阐述了V2G的概念,其次从电动汽车储能应用研究、电动汽车可调度容量研究和电动汽车移动储能对于配网影响及其协同控制研究等三个方面,综述了国内外V2G技术的研究状况。最后介绍了国内外部分有关V2G的示范应用,并对V2G关键技术的国内外研究状况进行了总结。     

货车后下部防护装置强度的试验方法研究

分析我国货车后下部防护装置标准的强度试验方法与国外法规的差异,并通过仿真分析对比货车后下部防护装置在静态加载、壁障碰撞和车辆追尾下的变形特性、吸能效果及其差异性,提出国标中存在的一些问题及修改建议。     

Investigating the influence of soil properties on railway traffic vibration using a numerical model

This paper presents the influence of dynamic and geometrical soil parameters on the propagation of ground vibrations induced by external loads. The proposed approach is based on a three-dimensional model, focusing on realistic excitation sources like impulse loads and moving railway vehicles. For the latter, a complete vehicle/track model is developed. The simulation is performed in time domain, offering an interesting approach, compared with classic cyclic analyses. The ground is modelled initially as an elastic homogeneous half-space and additionally as a layered half-space. First, the effect of homogeneous soil properties on ground vibration is analysed. Soil stratification is then taken into account, using various configurations. Analysis reveals that as receiver distance increases ground wave reflection in a layered ground plays an important role in the reduction of ground surface motion. This effect is magnified when the phase velocity wavelength becomes large compared with the depth of the surface layer.     

30000DWT多用途重吊船的开发与研究

本文论述了某航运公司的30000DWT多用途重吊船的开发与设计。船型设计既借鉴了其它航运公司同类型船的优秀设计，满足了公司的业务需求。这类型船将提高船队的竞争能力。     

乘用车后碰撞安全模拟与结构设计研究

针对我国乘用车后碰撞燃油系统安全要求的强制性标准,研究了乘用车后碰撞安全的一般设计方法。通过某车型三厢改两厢的改型开发案例,利用有限元分析方法,分析验证了改型车的燃油系统安全性。从中总结了乘用车后碰撞安全结构设计的一些原则与要点。     

地铁车辆基地出入线一度停车再起动的平纵断面关系模型

从《地铁设计规范》相关条文规定出发,探讨车辆基地出入线列车一度停车再起动的平纵断面关系;分析列车在停车时、停车后和起动时等三种不同工况的受力情况。根据牵引计算原理,建立其平纵断面关系模型。以长沙市轨道交通2号线西延二期工程为例,计算出入线的最大坡度与最小曲线半径。     

考虑前后多车的网联自动驾驶车辆混流跟驰模型

随着中国新基建战略的提出及自动驾驶和网联通信技术的不断发展，网联自动驾驶车辆（CAV）、自动驾驶车辆（AV）和常规人驾车辆混行的交通流将在未来长时间存在。建立适用于网联自动驾驶车辆、自动驾驶车辆和常规人驾车辆3种类型车辆的混流跟驰模型，考虑多前后车车头间距、多前车速度差、加速度差、与主体车辆的相对距离等因素，并进行典型场景的数值仿真。刹车和起步过程的3种混流数值仿真结果显示，模型在几种典型混行场景下均具有可行性，车辆的加速度和速度变化更为平缓。不同CAV比例下的数值仿真结果显示，车队中CAV比例越高，车队整体恢复至平稳状态的时间越短，波动幅度越小。CAV均质流数值仿真结果表明，与MHVAD模型相比，该模型不稳定区域减小33.8%，所控制的车队速度波动幅度减小14%。CAV与AV混流的数值仿真结果显示，与PATH实验室模型相比，由该模型控制的车队加速度进入相对稳定状态提前5.5 s。该模型可用于不同车辆均质流及3种车辆混行的队列控制，在目前开展混行实车试验困难的情况下，也可应用该模型进行混行跟驰仿真，从而为混行交通流的道路交通管理及基础设施布设提供理论依据和模型支持。     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

国内专用汽车发展现状浅析

文章阐述了我国专用汽车的发展概况,从专用汽车技术发展现状出发,分析了我国专用汽车发展中存在的问题以及发展趋势,并提出了相关建议.