温塘河特大桥主拱拱座基础裂缝成因及防止措施

大跨径拱桥拱座基础属于大体积砼结构工程,在浇筑过程中产生大量水化热,使砼体内与表面形成较大温差,产生热应力,从而导致砼体产生深度不等的裂缝.笔者以重庆渝邻高速公路温塘河特大桥拱座基础的施工技术为例,对大体积砼体内的温度应力进行了分析计算,并提出了防裂措施.     

双电机耦合驱动电动汽车驱动模式划分与优化

为充分发挥一款双电机耦合驱动系统电动汽车(DMCP-EV)多驱动模式的节能优势,制定了基于系统效率最优的驱动模式控制策略。根据该双电机耦合驱动系统的结构特点,定义了电机4种驱动模式并分别建立其动力学驱动模型和系统效率模型。在满足动力性要求的前提下,分析并划分了各驱动模式的工作范围,以系统效率为优化目标,采用粒子群优化算法进行优化,获得最佳的驱动模式切换控制和转矩分配策略。开展了Matlab/Simulink仿真和硬件在环试验验证。结果表明,经系统效率优化的驱动模式在满足动力性要求的前提下,有效提高了双电机耦合驱动系统的经济性,能耗降低11%。     

机械式变速箱传动效率实验研究分析

传动效率是机汽车变速箱传动效率是直接反映变速箱设计、制造水平的一项重要参数。文章对汽车变速箱传动效率测量影响因素、测试方法、及数据处理方面进行探讨,并结合实际测试工作中的经验总结了一些实际应用方法及对此参数的影响因素,藉此对机械式变速器效率测量精度提高方面起到参考及指导作用。     

高职院校教学诊断与改进

文章针对高职院校的招生生源变化和社会环境变化而导致的学生厌学情绪进行分析和诊断,认为传统教学方法已不适用于高职院校,进而重点论述了高职院校教学改革的措施,从教学态度、教学内容和教学方法进行分析,最后得出自己的经验,希望能对高职院校青年教师有所启发。     

Efficiency evaluation and PM emission reallocation of China ports based on improved DEA models

The emission of particulate matter (PM) and other atmospheric pollutants in port operations and shipping have caused a huge negative impact on the environment. Consequently, how to evaluate the environmental efficiency of ports and put forward corresponding countermeasures on this basis is becoming a more important issue than ever before from the perspectives of the government, academia, and society. We construct three data envelopment analysis (DEA) models to evaluate the environmental efficiency of ports under the circumstances of environmental control, non-environmental control and PM emission through inter-ports cooperation. The innovation of the DEA models constructed in this paper lies in: (1) Setting environmental control parameters to uniformly manipulate the situations of environmental control and non-environmental control, etc.; (2) Allowing non-equal proportional change of input index, expected output and non-expected output index; (3) Setting preference coefficients for ports to admit favorable decisions; (4) Providing a distance formula of expected output for PM emission reallocation. Further, data from 11 major ports in China are collected to compare the expected output under different PM emission standards assuming the situation of environmental control and non-environmental control, port cooperation, and non-cooperative sewage discharge. The empirical results show that: (1) Ports in the eastern China (Shanghai, Ningbo, and Nanjing) have higher port efficiency; (2) Port cooperation can improve the overall expected output but it will lose its edge with the improvement of PM emission standards. (3) Ports follow the same trend of output loss regardless of favorable decisions. In the end, the author makes a summary, puts forward relevant policy suggestions and makes the recommendation for future research.     

Phase change analysis of an underwater glider propelled by the ocean's thermal energy

The phase change characteristic of the power source of an underwater glider propelled by the ocean's thermal energy is the key factor in glider attitude control. A numerical model has been established based on the enthalpy method to analyze the phase change heat transfer process under convective boundary conditions. Phase change is not an isothermal process,but one that occurs at a range of temperature. The total melting time of the material is very sensitive to the surrounding temperature. When the temperature of the surroundings decreases 8 degrees,the total melting time increases 1.8 times. But variations in surrounding temperature have little effect on the initial temperature of phase change,and the slope of the temperature time history curve remains the same. However,the temperature at which phase change is completed decreases significantly. Our research shows that the phase change process is also affected by container size,boundary conditions,and the power source's cross sectional area. Materials stored in 3 cylindrical containers with a diameter of 38mm needed the shortest phase change time. Our conclusions should be helpful in effective design of underwater glider power systems.     

广义Kantorovich不等式的范数改进及其统计应用

对于广义Kantorovich不等式,选用适当的矩阵度量并给出相应的界,可以应用在线性模型的参数估计的相对效率问题上。用谱范数作为度量工具,给出广义Kantorovich不等式的的上界改进,并将其应用在线性模型中最小二乘估计的相对效率问题上。     

船舶烧伤病房气流组织分析与优化

针对舰船舱室气流组织的形式特点,以烧伤病房作为研究对象建立数学模型,通过使用Airpak软件对烧伤病房不同设计方案下的气流组织进行了计算仿真,通过舱室温湿度,空气流速,热舒适指标等参数的对比,获得舱室的压力、温度、速度、热舒适性指标等的分布特性,对烧伤病房气流组织进行了分析并提出了优化方法,可以有效提高人员的舒适性和气流组织效果。     

油田注水管道的腐蚀研究与缓蚀剂评价

油田注水管线所输送介质复杂,腐蚀现象严重,存在安全隐患,一旦因腐蚀泄漏就会造成巨大的经济损失。因此,开展油田注水管道的腐蚀研究及采取措施减缓腐蚀具有重要意义。为此,对某油田注水管道现场采集注入水样及腐蚀产物,通过X-射线衍射及X-射线能谱仪进行分析,分析结果表明腐蚀产物主要是碳酸钙,同时含有一定量的氯化物、碳酸亚铁、硫化物等成分。通过电镜扫描腐蚀产物的微观形貌,发现存在氯离子腐蚀。并通过ICP-OES分析输送介质组分,针对其腐蚀特点及输送介质组分,采用失重法及电化学方法评价了引入季铵盐的咪唑啉缓蚀剂HJD2最佳质量分数及缓蚀机理,实验结果表明该缓蚀剂对该注水管道具有较好的缓蚀作用,在现场注水温度下,最佳质量分数(0.06%)时的缓蚀效率为95.1%,通过注入该缓蚀剂可以有效地减缓该注水管线的腐蚀,延长管线的使用寿命。     

海上救生保温用具的设计与试验要求

主要介绍了PH2702型（PH2707型）海上救生保温用具的设计依据、材料和结构型式的选择,以及试验方法和结果。