轻型货车轮胎接地压力分布实测

利用自主开发的轮胎接地压力测试仪,进行了轻型货车不同花纹和不同使用年限轮胎,在不同轮胎胎压和不同负荷作用下,轮胎的接地压力分布规律测量。实测结果发现:轻型货车轮胎与路面的接触形状更接近于矩形;新胎比旧胎的接地压力要均匀些;轮胎胎压与平均接地压力、轮胎负荷与平均接地压力、轮胎负荷与有效接地面积基本上呈线性关系。     

道路预成形标线带检测技术

对道路预成形标线带检测技术,包括检测标准、产品分类、测试条件和技术要求等,结合国外先进标准进行分析研究。重点介绍在编写其检测标准时,对物理性能、色度性能、逆反射性能、耐水性能、耐碱性能、耐磨性能、粘结性能、抗滑性能等各项技术指标,参考国外先进标准和国内实际情况进行研究确定的过程,指导对国内标线带的产品检测和质量控制。     

非港湾式公交停车对道路交通流的影响分析

公交车进出站点不仅影响本身,也给其他车辆运行带来很大干扰。文章首先比较全面地分析非港湾式公交停车影响下道路交通流特征,然后借助于EXCEL软件,构建关于公交停车频率、公交停车时间、最大公交停车长度及其存在时间、道路流量的车速和车头时距多元线性模型,并进行了严格的数学检验。该研究为合理分析路段交通流状况、正确计算区间行驶车速与车头时距提供了依据。     

Autonomous cars: The tension between occupant experience and intersection capacity

Systems that enable high levels of vehicle-automation are now beginning to enter the commercial marketplace. Road vehicles capable of operating independently of real-time human control under an increasing set of circumstances will likely become more widely available in the near future. Such vehicles are expected to bring a variety of benefits. Two such anticipated advantages (relative to human-driver vehicle control) are said to be increased road network capacity and the freeing up of the driver-occupant’s time to engage in their choice of leisurely or economically-productive (non-driving) tasks.In this study we investigate the implications for intersection capacity and level-of-service of providing occupants of automated (without real-time human control), autonomously-operating (without vehicle-to-X communication) cars with ride quality that is equivalent (in terms of maximum rates of longitudinal and lateral acceleration) to two types of rail systems: [urban] light rail transit and [inter-urban] high-speed rail. The literature suggests that car passengers start experiencing discomfort at lower rates of acceleration than car drivers; it is therefore plausible that occupants of an autonomously-operating vehicle may wish to instruct their vehicle to maneuver in a way that provides them greater ride comfort than if the vehicle-control algorithm simply mimicked human-driving-operation.On the basis of traffic microsimulation analysis, we found that restricting the dynamics of autonomous cars to the acceleration/deceleration characteristics of both rail systems leads to reductions in a signalized intersection’s vehicle-processing capacity and increases in delay. The impacts were found to be larger when constraining the autonomous cars’ dynamics to the more-restrictive acceleration/deceleration profile of high-speed rail. The scenarios we analyzed must be viewed as boundary conditions, because autonomous cars’ dynamics were by definition never allowed to exceed the acceleration/deceleration constraints of the rail systems. Appropriate evidence regarding motorists’ preferences does not exist at present; establishing these preferences is an important item for the future research agenda.This paper concludes with a brief discussion of research needs to advance this line of inquiry.     

Transport energy consumption in mountainous roads. A comparative case study for internal combustion engines and electric vehicles in Andorra

This paper analyses transport energy consumption of conventional and electric vehicles in mountainous roads. A standard round trip in Andorra has been modelled in order to characterise vehicle dynamics in hilly regions. Two conventional diesel vehicles and their electric-equivalent models have been simulated and their performances have been compared. Six scenarios have been simulated to study the effects of factors such as orography, traffic congestion and driving style. The European fuel consumption and emissions test and Artemis urban driving cycles, representative of European driving cycles, have also been included in the comparative analysis. The results show that road grade has a major impact on fuel economy, although it affects consumption in different levels depending on the technology analysed. Electric vehicles are less affected by this factor as opposed to conventional vehicles, increasing the potential energy savings in a hypothetical electrification of the car fleet. However, electric vehicle range in mountainous terrains is lower compared to that estimated by manufacturers, a fact that could adversely affect a massive adoption of electric cars in the short term.     

马达加斯加武海马尔墓地的发掘与研究

马达加斯加武海马尔墓群有近六百座墓,其墓葬形制与同时期东非地区阿拉伯穆斯林的墓葬形制有着明显的不同,有些墓葬与中国穆斯林的墓葬形制有较多相似之处。部分墓葬中出土了大量元、明时期的瓷器和其他随葬品,反映出武海马尔墓群主人可能是元、明时期来自中国东南沿海地区或东南亚的色目、回回商人,以及附属于他们的汉人、马来人或武海马尔当地土著,如他们的妻妾、子女、随从、伙计等,其中有些是受雇于穆斯林商人的汉人或者受穆斯林影响的汉人,因此,其葬俗保留了一些中国传统丧葬礼仪的痕迹。     

Integrated approach to determine highway flooding and critical points of drainage

Among the natural hazards that threaten transportation infrastructure, flooding represents a major hazard to highways as it challenges their design, operation, efficiency and safety. In extreme cases, it may lead to massive obstruction of traffic and direct damages to the road structures themselves and indirect damages to the economic activity and development of the region. To enable the prevention of such consequences, and the proposition of adaptive measures for existing infrastructure, this paper presents an integrated framework to identify the most vulnerable points to flooding along a highway. This is done through the combination of remote sensing information (e.g. LiDAR based Digital Elevation Model, satellite imagery), a high-quality dataset, and a quasi-2D hydrodynamic model. The forcing condition is defined using a hyetograph associated to a storm with duration of 1 day and return period of 100 years. The selected highway is located in the Mexican state of Tabasco, where extreme precipitation events and floods are frequent. Results demonstrate the ability of the methodology to identify critical water levels along the road (h > 1.50 m) at those locations where flooding has been experienced, as well as points of inspection for the highway drainage. These locations were visited in the field and maintenance problems were detected that do increase its level of exposure. We show that this framework is useful for the generation of a flood management strategy to the analyzed highway, which includes an optimum location of adaptive measures to an anticipated more intense future climate.     

辽阳出口路现场热再生简析

重点介绍了辽阳出口路现场热再生沥青混合料的级配设计和施工工艺及施工过程中的质量控制要点。     

关于山区高速外业勘察中若干问题的探讨

近几年来,我国山区高速建设里程日益增加.因受复杂地形、地质条件的限制,山区高速的外业勘察具有其独有的关键技术难点,应在普通建设条件下的作业内容、作业方式的基础上,采取针对性的对策措施,确保外勘资料满足设计需求.     

基于LBP算子的路面类型识别研究

不同的路面类型会对车辆的制动、加速、变道等决策产生不同影响,因此实时获取路面类型信息对于提高智能汽车的安全性、舒适性等有着重要意义。论文提出一种基于LBP算子的路面类型识别方法,首先采集了四种车辆行驶常见路面的图像信息,并对图像进行了增广处理;然后使用LBP算子提取出路面图像的纹理特征,再采用PCA方式对纹理特征进行降维;最后通过分类器对数据进行训练与分类。实验结果表明该方法的最高分类准确率可以达到98.5%,有效提升了当前路面类型识别的精度。