汽车操纵稳定性的广义汽车转向稳态响应模型

针对传统汽车操纵稳定性理论的线性二自由度模型的不足,构建了一个新的广义汽车转向稳态响应模型,并说明了该模型的广泛适用性。以某不足转向轿车模型的有关参数为例,仿真计算并比较了应用两种模型时该轿车等速圆周行驶时的稳态响应状况,验证了广义模型的正确性,同时得到了一条有别于传统汽车操纵稳定性理论的重要结论。     

山区公路层间滑移破坏机理分析及对策研究

通过现场调查,初步分析了山区公路沥青路面基面层滑移的主要原因。应用有限元法,对基层和面层之间的剪应力进行计算分析,得出了基面层间剪应力变化的一般规律,认为层间最大剪应力主要取决于面层厚度和荷载条件。在前述计算分析的基础上,利用自行研制的DLG A路面材料剪切仪进行了大量的层间滑移室内模拟试验,考察了不同的层间处理措施、温度、基层类型等因素对层间抗剪能力的影响,提出了防止基面层滑移的技术措施。     

轻型货车轮胎接地压力分布实测

利用自主开发的轮胎接地压力测试仪,进行了轻型货车不同花纹和不同使用年限轮胎,在不同轮胎胎压和不同负荷作用下,轮胎的接地压力分布规律测量。实测结果发现:轻型货车轮胎与路面的接触形状更接近于矩形;新胎比旧胎的接地压力要均匀些;轮胎胎压与平均接地压力、轮胎负荷与平均接地压力、轮胎负荷与有效接地面积基本上呈线性关系。     

GPR在高速公路隧道掘进中掌子面前方岩体结构超前预报工作中的应用

以上(海)瑞(丽)高速公路湖南境内邵(阳)-怀(化)段芭蕉溪隧道掘进中掌子面前方岩体结构的超前预报为例,通过地质雷达(GPR)探测,结合TSP203探测以及开挖掌子面的详细地质素描等工作,可以实时、详细、准确地了解开挖掌子面前方的岩体结构情况,为施工单位合理安排施工作业进度、减少工程隐患提供科学依据。     

钢桥面热塑性沥青混合料铺装车辙预估方法

钢桥面热塑性沥青混合料铺装车辙病害主要是铺装层抵抗剪切变形或塑性流动能力不足引起的,而铺装层混合料的初期压密只会增加车辙量而不足以形成车辙破坏。本文利用通用有限元ANSYS软件提供的蠕变模型和层-应变法,提出了钢桥面热塑性沥青混合料铺装车辙预估方法,并研究了车辙预估模型中参数的确定方法。实例分析表明,本文提出的钢桥面热塑性沥青混合料铺装车辙预估方法是可行的。     

Spatiotemporal influence of land use and household properties on automobile travel demand

Understanding the patterns of automobile travel demand can help formulate policies to alleviate congestion and pollution. This study focuses on the influence of land use and household properties on automobile travel demand. Car license plate recognition (CLPR) data, point-of-interest (POI) data, and housing information data were utilized to obtain automobile travel demand along with the land use and household properties. A geographically and temporally weighted regression (GTWR) model was adopted to deal with both the spatial and temporal heterogeneity of travel demand. The spatial-temporal patterns of GTWR coefficients were analyzed. Also, comparative analyses were carried out between automobile and total person travel demand, and among travel demand of taxis, heavily-used private cars, and total automobiles. The results show that: (I) The GTWR model has significantly higher accuracy compared with the Ordinary Least Square (OLS) model and the Geographically Weighted Regression (GWR) model, which means the GTWR model can measure both the spatial and temporal heterogeneity with high precision; (II) The influence of built environment and household properties on automobile travel demand varies with space and time. In particular, the temporal distribution of regression coefficients shows significant peak phenomenon; and (III) Comparative analyses indicate that residents’ preference for automobiles over other travel modes varies with their travel purpose and destination. The above findings indicate that the proposed method can not only model spatial-temporal heterogeneous travel demand, but also provide a way to analyze the patterns of automobile travel demand.     

景观道路的设计实践——广阳岛环岛路设计

广阳岛环岛路的主要功能是服务性景观路,跟环岛滨江公园一起,共同构筑广阳岛的滨江景观带。尝试引进了国外的宁静化设计,尽可能推行最生态的工程做法,努力创造人与自然相和谐的环境,并竭尽全力地将这些构想付诸实施。为了实现以上目标,道路、交通、排水、结构、桥梁和电照专业,在景观专业的组织下,共同展开了这条景观路的设计尝试。     

Catenary riser sliding and rolling on seabed during induced lateral movement

Catenary risers have an interaction zone with the seabed, usually referenced as flowline. Movements in this region can be induced by sea currents and large offsets in floating unit, leading to touchdown position changes and affecting internal loads along riser length. In this work the contact flowline-seabed is modeled including sliding and rolling friction. Case studies involving large offsets in floating unit and lateral sea currents are solved to better understand the consequences of possible rolling and large sliding. The riser is modeled using a geometrically-exact finite element beam model. The contact is addressed with a new technique to include rotation movements from underlying beam models. This leads to global riser models including complex kinematics, being able to represent scenarios with alternating sliding/rolling and its consequences on internal loads of riser structure. A parametric study is performed to measure the influence of the friction coefficient in tension and torsion along typical flexible pipe and steel pipe catenary risers.     

辽阳出口路现场热再生简析

重点介绍了辽阳出口路现场热再生沥青混合料的级配设计和施工工艺及施工过程中的质量控制要点。     

Definition of wind blowers for vehicles testing at chassis-dyno facilities using a CFD approach

The need to increase measurement accuracy of fuel consumption and pollutant emissions in vehicles is forcing the market to develop chassis-dyno test cells that reproduce on-road conditions realistically.Air-cooling is key to vehicle performance. It is therefore critical that the design of a test cell guarantees realistic cooling of all vehicle components, as important errors in fuel consumption and emissions measurements may otherwise arise. In a test-room, a blower placed in front of the vehicle supplies the cooling air. While there are some guidelines in the literature for the selection of fans required for emissions measurements for standard driving cycles, the information for designing the air supply system for specific tests in other areas is scarce.New Real Driving Emissions (RDE) legislation will force manufacturers to perform on-road measurements of pollutants. This represents a significant challenge due to the variability of conditions coming from non-controlled parameters. In order to optimize vehicles, different tests are performed in cells equipped with a chassis-dyno where the on-road flow field around the vehicle is reproduced as closely as possible.This work provides some guidelines for the definition of the airflow supply system of chassis-dyno facilities for vehicle optimization tests, based on a CFD analysis of the flow characteristics around the vehicle. By comparison with the solution obtained for a vehicle in real road driving conditions, the exit section of the blower and the distance between the blower exit and the car that best reproduce realistic on-road flow conditions in a test room are determined.